Your cart is empty.
Your cart is empty.Product Description
16 Banana Post and 2 RCA Speaker Wall Plate
Easy to install
Simply install the back plate with the screws and components given, connect the cables from the 8.2 surround sound system to the ports on the wall plate and use screws to attach the wall plate to the wall.
Installation tips
1. Run speaker wires from each speaker to the wall plate.
2. Strip the insulation from the ends of the speaker wires.
3. Connect the wires to the corresponding terminals on the wall plate.
4. Secure the wall plate to the wall with screws.
5. Repeat for all speakers.
6. Test the connections by playing audio from each speaker.
Easy to Clean
Sleek mooth finish and shiny surface
Wall Plate for 8.2 Surround Sound System and Home Theatre
Accommodate banana plugs on both front and back sides of the plate at the same time depending on depth of gang box. A long lasting choice with ABS hard plastic housing and gold-plated connectors.
Easy to use
It is easy to use, providing a convenient and centralized location for connecting the speakers and subwoofer for a 8.2 surround sound system and home theatre. It features 16 ports for connecting speakers, speaker connectors are compatible with banana plugs, spade connectors and bare 12 to18 AWG speaker wires and 2 RCA ports for subwoofers.
Shane Ledbetter
Reviewed in the United States on April 17, 2025
Worked great in our theatre room
Me
Reviewed in Canada on June 24, 2024
Works well. Just a bit snug fitting all the wires on the back. I did use 10 gauge so a little larger diameter made it more difficult.
Christopher
Reviewed in the United States on February 19, 2024
Feels solid and I don't notice any reduction in audio quality. Nice that there are so many hookups and it's somewhat modular. Be sure to order a mud ring to install with it.
Ron playford
Reviewed in Canada on January 12, 2024
My banana plugs fit very loose like they fall out
Ted Diehl
Reviewed in the United States on December 12, 2023
I like to wall plate but unless you find a "short shaft" banana plug, pushing it in on the front side will push the back side banana plug out. I recommend using either a spade connection or bare wire on the back side. I have been unable to locate "short shaft" banana plugs
Shanmugaraj Periyasamy
Reviewed in the United States on September 28, 2019
I used this as an input junction box behind my AV gear rack. The plate itself is well made, and well labeled. Very easy wire up the posts. Very sturdy and neat looking plate. Now my wiring closet looks very clean and no more messy. Thanks for this wall plate.
Adrian Guzman
Reviewed in the United States on September 2, 2019
This wall plate is built well and very easy to install and wire. This is a very good solution to concealing your speaker wire and cleaning up the area behind your equipment (receivers, amps etc...) I received it in a timely manner and was not disappointed with the quality of the product.
Bruno Rodeghiero
Reviewed in the United States on December 21, 2019
Very well package and laid out. The product evan pre labled to aid in installation. Very good quality gold plated connectors provide worry free signal trans mission.
Ralph
Reviewed in the United States on October 4, 2019
Each speaker channel speaker pair of connectors have a red and black band identifying the two wires on each end, however the threads on some connectors are not cleaned and are difficult to turn to gain access to the hole to insert the wire. The only way to loosen the connector nut is to use pliers, which tears the fragile color band. Other than that, it works great.
TOPROY
Reviewed in the United States on August 6, 2018
If you go to a local home improvement place, you are lucky if you find anything similar, in fact I couldn't find it, you could only order them and they were not as complete and they were more expensive.This is a quality product, the only thing missing is a mounting bracket, but those are a couple of dollars and no wall plate ever comes with the mounting bracket.You can either connect the wires via twist and lock or you can use banana type connectors, either way, it works perfectly. I would recommend this for any professional grade home installation, even institutional one.My system is 7.1 so I didn't use the center channels, but that is OK because it wired it for maybe a future expansion. But at it stands it sounds perfect.
Recommended Products