Shopping Cart

Your cart is empty.

Your cart is empty.

9985006-R2 Automatic Robotic Pool Cleaners Tracks Parts Replacement for Dolphin Maytronics Models from 2006 to Present Part

4.4 (8) Write Review
Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

About this item

  • PROSOCOOL Pool track replacements are made of high quality materials. Improve the performance of your robotic pool cleaner and keep your Dolphin pool cleaner looking its best. Easy to replace old stretched and worn rails. Close fit, better traction, and increased work efficiency.
  • PROSOCOOL Tracks are fitting With Dolphin Pool Cleaners Models: Apollo, Apollo Plus, Atlantis, Advantage Plus, Aquarius XL, DX3, DX4, DX6, C3, C4, C5, C6 Plus, Discovery (old), Endeavor, Enduro, Edge, Explorer , Liberty ,M200, M400, M500 ,M3, M4, M5, Maytronics Models from 2006 to Present Part
  • PROSOCOOL Tracks are replacement for Dolphin Pool Cleaners Models: Nautilus (not all), Nautilus CC Plus, Neptune, Neptune Plus, Oasis Z5i, Premier , Primal X3, 3001, Prowler 820/830 , Pro ,Quest, Saturn (old), Sigma, OdysseyDX3S, DX4+S, DX5+S ,Triton/Triton Plus (old), Wave 50/65/75/90, X2
  • If it has been more than 2 years since you last replaced the track, check it for signs of wear, tear and compression. You'll find your automatic pool cleaner is working fine, but moving slowly, lacking traction on the pool floor and unable to climb walls, and PROSOCOOL Tracks are the solution.
  • IMPROVE YOUR ROBOTIC POOL CLEANER'S PERFORMANCE - Worn out tracks cause several performance setbacks for your automatic pool cleaner. It may begin with sluggish movement, lack of traction on the pool floor, and inability to climb walls. Don't wait until the cleaner begins to malfunction. Get ahead of your pool cleaner maintenance with a pair of brand new, high-performance timing tracks.


Product Description

dolphin nautilus cc plus parts
9985006-r2
POOL REPLACEMENT TRACKS
POOL CLEANER TRACK

The Pool Tracks are Replacement for Maytronics Dolphin Long Gray Tank Tracks - Pack of 2 (Item 9985006-R2) is specifically designed to to fit the following Pool Cleaners:

Prowler 820, Prowler 830, Wave 50, Wave 75, Wave 90, Wave 2 x 2 Gyro

, Quest, Premium, Apollo Plus, Discovery, Nautilus, Advantage Plus RC, Advantage Plus Pro RC, DX6, M4, M5, Edge Triton, Advantage Plus RC

, Apollo, Apollo Plus, Atlantis Basic, C3, C4, C5, C6 Plus, Discovery, DX3, DX4, DX5, DX5s, DX6, DX6 Cleaner, Edge, Endeavor, Evolution X5, Explorer, M4, M5, Nautilus (not all), Nautilus Plus, Premier, Pro, Quest, Saturn, Supreme M5 Liberty, Triton, Triton Plus, Wave 2x2 Gyro, Wave 50, Wave 65, Wave 75, Wave 90 etc.


Customer
Reviewed in the United States on September 7, 2024
I like the product delivered as indicated .
Thomas E. McGuinness
Reviewed in the United States on July 29, 2024
These worked perfectly.
Steve Parker
Reviewed in the United States on July 14, 2024
Good price. Quick delivery
Andrew M. Foster
Reviewed in the United States on July 12, 2024
What you need to know at a glance:REGARDS THE NAUTILUS CC PLUS PRO MODELIf you purchase this product you will be disappointed.+ Easy to install (partly because they are longer/stretchier than they should be)- Poor quality - they are made of harder plastic than the OEM tracks and are too long and stretch- Bought at the end of the 2024 season, we are 2 months into the 2025 season and they are a constant headache- The tracks slip out from between the bearings and get caught up in the pool cleaner's internalsThese are not the replacement pool cleaner tracks you want! They are made of a rubber that's harder than the OEM tracks. They are slightly longer and they tend to stretch over time. It won't be long before they are constantly slipping off of the bearings at getting caught up inside the pool cleaner body, causing your pool cleaner to stop moving. The belts get chewed up and get worse with each failure. I've been very disappointed with these replacement pool cleaner tracks. They last just long enough to not be returnable. There are lots of reviewers who have detailed similar experiences to my own, so consider yourself warned.UPDATE 7/20/24: After weeks of constantly disassembling my pool cleaner to put the tracks back on the wheels, I finally lost patience and purchased tracks directly from Maytronics. The tracks cost roughly twice as much as these. They were more challenging to install because they are tighter, but my pool cleaner is back to full functionality. It runs perfectly and I've not experienced a single issue with the tracks jumping off the wheels or jamming up. This proves beyond a shadow of doubt that these after market tracks are just not of the same quality as the OEM tracks. Save yourself the frustration I've experienced. Don't buy this product.
94Q45T
Reviewed in the United States on June 19, 2024
Bought these to replace the worn tracks that came originally on a Maytronics Dolphin Sigma. Exact fit, and so far (4 days) they work fine.
Telgator1
Reviewed in the United States on May 24, 2024
It’s always difficult to rate something fairly when it doesn’t arrive in time. When the treads arrived, they looked fine but a little rigid as if they’d be challenging to install. But since they arrived a week late I ended up sending them back so can’t comment on quality or durability.
Christopher
Reviewed in the United States on October 9, 2024
My bad but really read the description. 2 diff size tracks. I could only replace one of them.
John
Reviewed in the United States on October 23, 2024
I bought this product in July for my Nautilus CC plus. This product felt a little more rigid than the one I removed from the pool vac. But, it’s still worked. I recently noticed that my Nautilus CC plus would turn on, but would not go anywhere. I decided to take it apart and see what was wrong. When I did, I realize that the tracks had ripped in multiple places. The tracks also had worn down Into sharp ridges. I replaced the new tracks with my old ones. I now have two new holes in our liner as a result. I would not recommend this product.