Your cart is empty.
Your cart is empty. Description：
- Great for electric guitar/bass luthiers repair tool
- Easy and accurate fretting on different radiused fretboards
- Just place the right insert in the caul, easy to use
- Radius: 7.25/9.5/12
- Material:metal + alloy
- Color: black
Package Includes:
3 Pcs Guitars Fretboard Press Caul Insert
1 Pcs Fret Press Caul
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Martin Verner
Reviewed in Germany on January 9, 2025
Much better quality than the gold plated sets in here. You get fewer cauls, but these actually work. The grooves for the frets are all the way through the cauls and not only partially as the other sets.I recommend this set
zeljko cvijanovic
Reviewed in the United States on August 16, 2024
Just recently I acquired 2001 Mexican Fender Strat. The guitar was good but the frets were (ob)used to the point that crowning wasn’t the option so I decided to change frets. This kit was very helpful. I used it with my drill press. It made the job much easier and precise.
Greg Woodall
Reviewed in the United States on April 7, 2024
I received this item and one of the most important parts was already stripped out and couldn't be used. Absolute JUNK!!!!
Gal Peter
Reviewed in the United States on July 12, 2023
works well, easy to use and change radius
melgapin
Reviewed in Spain on May 16, 2023
Aparentava ser de boa qualidade porém não pode ser utilizado de imediato sem alterações. A vara de metal apesar de ser amovível deveria ter mais estabilidade uma vez que a reparação de trastes é uma tarefa de precisão. Falta de estabilidade pode ser a diferença entre uma pequena reparação e uma guitarra irreparavelmente danificada.Acabei por utilizar um dos acessórios da minha prensa, o qual encaixa melhor e oferece maior estabilidade.No geral tem alguma qualidade, mas não pelo preço que paguei - mais de 25eu. 20eu seria mais razoável. Por 15 compraria sem qualquer hesitação.
Funkar 👍
Reviewed in Sweden on December 30, 2023
Verktyg som underlättar jobbet
GIO-FONTA
Reviewed in Italy on November 1, 2023
Ho rifatto la tastiera di una chitarra acustica. L'ho utilizzato solo per una parte di tasti, utilizzando un sergente da falegname per fare pressione, senza motare il perno cilindrico in dotazione. Penso si possa usare anche "a martello" ma bisogna avere l'accortezza di appoggiare il manico su di un supporto solido che non danneggi il legno. Ideale avere la pressa, ma allora si deve mettere in conto una spesa rilevante che non giustifica il cambio tasti "fai da te". Pertanto la valutazione è per me interlocutoria, non mi è stato indispensabile, alla luce dell'esperienza fatta, non lo comprerei più; ho fatto un buon lavoro usandolo poco e solo perché l'avevo comperato.
R2
Reviewed in the United States on October 1, 2022
When used with a tabletop drill press, this device worked great! Even pressure. Accurate radius.
BILL CUFF
Reviewed in the United States on January 27, 2022
Good for the money
Noname
Reviewed in the United States on April 15, 2022
Decent tool, using in drill press since that's what I have.The slotted, radiused contact surfaces of the various inserts had very slight burrs you can feel with your fingernail, but a few swipes with fine sandpaper cleaned them right up - otherwise it might marr the softer metal of the frets.
jackal
Reviewed in the United States on October 26, 2021
I had a problem with a raised fret, didn't need a fret job, so instead of leveling, I used this to tamp the fret into place. Worked great! Saved a lot of time and money.
Phil M.
Reviewed in the United States on April 30, 2021
Build quality is excellent and finish is beautiful. Inserts did fit tight due to a tiny burr from threading the hole for the set screw. Not a defect. Two seconds with a small file fixed that minor problem. Very impressed with it.
Recommended Products
