Shopping Cart

Your cart is empty.

Your cart is empty.

Anderic Replacement FAN-9T with Reverse Key Thermostatic Remote Control for Hampton Bay Ceiling Fans - FAN9T (FCC ID: L3HFAN9T, PN: FAN9TR, Works Receiver FAN10R, FAN-10R)

Free shipping on orders over $29.99

$36.00

$ 18 .99 $18.99

In Stock

About this item

  • ⚠️ MAKE SURE YOUR ORIGINAL REMOTE READS "FAN-9T" ON BACK. ⚠️
  • Compatibility and Note: The Anderic FAN-9T remote control is compatible with Hampton Bay ceiling fans. It features FCC ID: L3HFAN9T and PN: FAN9TR. Please note that this remote does not support dimming functionality; it is designed for lights only, with on/off control. Ensure that your original remote reads "FAN-9T" on the back for compatibility.
  • Temperature Conversion: Switching between Celsius and Fahrenheit temperature displays is a breeze with the FAN-9T remote control. By holding down the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds, you can easily switch between the two units of measurement, customizing the temperature settings to your preference.
  • Thermostatic Function: Experience precise temperature control with the thermostatic feature of the FAN-9T remote control. Set your desired temperature, and the remote will automatically adjust the fan speed to maintain a comfortable environment.
  • Reverse Operation: With the Anderic FAN-9T remote control, you can easily change the direction of your ceiling fan's rotation. The reverse key allows you to switch between the forward and reverse airflow modes, providing optimal comfort and airflow circulation in any season.



Product Description

Introducing the Anderic Replacement FAN-9T with Reverse Key Thermostatic Remote Control for Hampton Bay Ceiling Fans. Upgrade your ceiling fan control with this advanced remote that offers convenience and enhanced functionality, specifically designed for Hampton Bay ceiling fans.

Reverse Operation:

With the Anderic FAN-9T remote control, you can easily change the direction of your ceiling fan's rotation. The reverse key allows you to switch between the forward and reverse airflow modes, providing optimal comfort and airflow circulation in any season.

Thermostatic Function:

Experience precise temperature control with the thermostatic feature of the FAN-9T remote control. Set your desired temperature, and the remote will automatically adjust the fan speed to maintain a comfortable environment.

Lights On/Off:

This remote control provides convenient control over your ceiling fan's lights. With a simple press of a button, you can easily turn the lights on or off, adding functionality and versatility to your ceiling fan.

Wall Mount Holder Included:

The Anderic FAN-9T remote control comes with a wall mount holder, ensuring that your remote is always within reach when you need it. The holder allows for easy storage and prevents the remote from being misplaced or lost.

Temperature Conversion:

Switching between Celsius and Fahrenheit temperature displays is a breeze with the FAN-9T remote control. By holding down the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds, you can easily switch between the two units of measurement, customizing the temperature settings to your preference.

Compatibility and Note:

The Anderic FAN-9T remote control is compatible with Hampton Bay ceiling fans. It features FCC ID: L3HFAN9T and PN: FAN9TR. Please note that this remote does not support dimming functionality; it is designed for lights only, with on/off control. Ensure that your original remote reads "FAN-9T" on the back for compatibility.

Upgrade your Hampton Bay ceiling fan control with the Anderic Replacement FAN-9T with Reverse Key Thermostatic Remote Control. Enjoy the convenience of reverse operation, precise temperature control, and easy lighting control with the touch of a button. The included wall mount holder keeps your remote organized and accessible. Please refer to the instructions included, which contain a dip-switch panel inside the battery compartment. Get your Anderic FAN-9T remote control today and enhance your Hampton Bay ceiling fan experience.

Note: To change from C to F, hold down the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds.

WARNING ABOUT: Windward II 54 in Ceiling Fan - if your original remote's model number starts with "CHQ" (located on the back of your original remote) then you will need to purchase the RR7096TR with the yellow light button (even though yours has the green light button).

TROUBLESHOOTING TIPS:

  1. BEFORE ORDERING. Confirm that you are ordering the correct remote. The back of your original remote must read: "FAN9T". If it reads anything other than this, such as CHQ..., then this remote is NOT COMPATIBLE.
  2. If the unit is not working with your fan:
    1. Confirm the battery is installed correctly and tested to be good working.
    2. Confirm that the DIP switches located inside the battery compartment match the same pattern as the DIP switches that are located on the receiver unit inside your fan.

Thorsten Cragstone
Reviewed in the United States on September 2, 2024
My fan has FAN-9T on the back. My pins are set correctly. I ordered 3 remotes so I did I doubt I have defective units. All 3 remotes from this amazon listing did not work.I ordered a different remote from amazon, one that was not available with free shipping, and it works. Shame all 3 of these will have to go back and I will have to order the more expensive remotes if I want to have a backup replacement.
Liz B
Reviewed in the United States on July 3, 2024
This replaced the original remote for my Hampton Bay fan with no issues. My remote model didn’t have the exact model name referenced in the description, but it did have the forward and reverse function. After setting the new remote to have the same DIP code as the old remote, fan and remote worked together perfectly. I appreciate the inclusion of the wall mount, previous owners tossed the original but this should help prevent the new remote from getting damaged.
Chollywolly
Reviewed in the United States on June 24, 2024
I just set the little levers inside the same as my old remote and it worked. A triumph for someone like me!
a.l
Reviewed in the United States on November 22, 2024
Very happy!
Customer
Reviewed in the United States on October 29, 2024
good item
Josée F. Breton
Reviewed in Canada on September 22, 2023
I Like thé facility of use and Rassy for replacement of the old telecommand
amborg
Reviewed in the United States on May 21, 2023
My Hamilton Bay Windward II 3-speed ceiling fan and light stopped working, turns out the remote control was faulty, new batteries and cleaning the pushbuttons’ contacts did not revive it.So I searched for a replacement remote, and it was a bit more complicated than I expected. There are several versions of these remotes, they all look basically identical unless you pay careful attention. Many of them have a “fan timer” button where mine is a “for/rev” button (the Windward II fan can reverse direction and push air downward or upward), while others have a light dimmer (mine doesn’t, and it uses a ring-shaped fluorescent bulb), which isn’t dimmable. Also my light on/off button is green, but some remotes have a yellow button instead, and I read somewhere the difference is significant, not cosmetic. So buying the correct remote control is needed to ensure total compatibility.I found this one, even though it has an “Anderic” logo rather than “Hamilton Bay”, it does have the same model # FAN-9T.After setting the DIP switch to match my old remote and installing batteries, I’m happy to find that this remote works is compatible with my Windward II. All functions work perfectly as expected.I had dreaded having to replace the whole fan, because I really like the styling of the Windward II, and changing out the whole thing would cost a lot more money and be a bunch of work. Well, that wasn’t necessary, as this inexpensive replacement remote control saved the day!
Jose
Reviewed in Mexico on May 20, 2023
NO FUNCIONÓ.
AdrienneJ100
Reviewed in the United States on December 17, 2023
Old fan had a remote where the battery connector corroded. I had no idea if this would work since the fan was over 10 years old. I put batteries in it, changed the code in the battery compartment to the one on my current remote and tada it worked! Very happy! We can use our fan properly again!
Chiyansoy
Reviewed in the United States on November 13, 2023
Works great, however, there is a but, it only works well if you also replace the receiver unit for one of the same brand. It states that it is a replacement for a Hampton Bay remote but it really does not work with the Hampton's original equipment. Once I purchased their receiver, I have my old beautiful and powerful fan back on.
Recommended Products

$28.00

$ 14 .99 $14.99

4.6
Select Option