I've used Brostrend products for many years, and Brostrend products never disappoint. The same can be said about this long distance WiFi network bridge. As with all other Brostrend products I've used, this is a complete kit. Everything you're going to need is included in the box! No running around trying to find POE injectors or mounting hardware. It's all there at your fingertips! With WiFI anything in the way reduces the signal or blocks the signal entirely. You need to be able to actually see the building you're sending to CLEARLY. If you can't see it clearly, the WiFi probably won't work.I have 7 buildings on my property. Only one is close enough for regular WiFi connections, but at 35 feet between my WiFi router and the outbuilding, even it gets a signal sometimes too weak to connect to. I need a solid connection in my barn, 1/2 mile from my house. I found setup of this system pretty easy. Everything I needed was included in the box, including decent mounting hardware. I ran CAT6 cabling for everything and positioned the POE power injectors indoors to protect them from the weather. I started with the access point or transmitter and the station/receiver in the same room. They paired automatically. I didn't lift a finger! After that, I moved the AP to a sturdy pole on my home's roof, and the station to my warehouse. To my great joy, the connection was rock solid and FAST!This is an excellent product made to withstand any weather you're likely to see. I love being able to work on my home network from my barn, now possible thanks to this network bridge!

I recently acquired the WiFi Bridge for extending my network between my house and my garage, and I have to say, I'm thoroughly impressed!Long Range and Reliable Connection:The 5 km long-range connection is a total game-changer! I was able to extend my Wi-Fi to my garage with ease, and the signal is incredibly stable. The range is perfect for connecting buildings on my property, like my house, barn, and garage, and it even works well in areas where I would have previously had no internet access (think RV or remote spots). The connection stays solid as long as there’s a clear line of sight, which I made sure to maintain, and it works flawlessly.Impressive Speed and Dual Gigabit Ports:The 867 Mbps on the 5 GHz band is super fast and more than enough for streaming, working, and browsing. What impressed me even more were the dual gigabit Ethernet ports on each unit, which makes for seamless data transfer. I’ve connected my router and devices directly to the Ethernet ports, and it’s like having an Ethernet connection without any lag or buffering. I can work from my shed without any performance issues—no more dropped connections!Easy Setup and Plug-and-Play:The plug-and-play setup was smooth and hassle-free. The devices came pre-paired, so all I had to do was plug in the AP (Transmitter) and Station (Receiver), and within minutes, everything was up and running. It's nice that the units support both wall and pole-mounted installations—this flexibility made it easy to mount them in the optimal position.Outdoor Durability:What’s also great about this WiFi bridge is its outdoor-ready design. With its IP65-rated enclosure, it’s built to handle harsh weather conditions. It’s waterproof, dustproof, and even has 6kV lightning protection, which gives me peace of mind knowing that I won’t have to worry about it during storms or extreme temperatures. The bridge can hold up to whatever nature throws at it!Overall Thoughts:Overall, this WiFi bridge has been a fantastic investment. It has significantly improved my network coverage and speed over large distances. It's especially great for remote locations, farm setups, or if you need to share internet between different buildings. I would definitely recommend it to anyone looking to extend their Wi-Fi network without the hassle of running cables over long distances.If you’re in need of an easy-to-use, durable, long-range Wi-Fi bridge, this is definitely the one to get! 5 stars all around for performance, ease of use, and value for money!

The BrosTrend 5KM WiFi Bridge is an excellent solution for extending a network wirelessly over long distances. Designed for outdoor use, this point-to-point (PtP) and point-to-multipoint (PtMP) bridge provides a stable and fast connection between buildings, making it an ideal choice for connecting garages, outbuildings, or remote locations without running long Ethernet cables. With its 5GHz frequency and 867Mbps data transfer rate, it delivers reliable performance for most network applications, including security cameras, remote workstations, and general internet access.One of the standout features of this WiFi bridge is its ease of setup. The plug-and-play functionality simplifies installation, allowing users to establish a secure wireless link without extensive technical knowledge. The devices come pre-paired out of the box, which eliminates the need for manual configuration. Once mounted and powered, the connection is automatically established, making deployment quick and efficient. For users who require additional customization, the web-based interface provides options for fine-tuning settings such as SSID, channels, and security preferences.The construction of the unit is solid, with a weatherproof casing that protects it from harsh outdoor conditions. The device is rated for long-term outdoor use, with resistance to rain, wind, and temperature fluctuations. This durability ensures a stable connection even in challenging environments. The two included Gigabit Ethernet ports provide flexibility, allowing multiple wired devices to connect without sacrificing speed. This feature is particularly useful for applications such as IP cameras, VoIP phones, or additional networking equipment.Performance-wise, the WiFi bridge maintains a strong and consistent connection across significant distances. The 5KM range is achievable under optimal conditions with a clear line of sight, although obstacles such as trees or buildings may reduce the effective range. In real-world usage, the connection remains stable with minimal latency, making it suitable for streaming, video conferencing, and other bandwidth-intensive tasks. The wireless signal remains strong even in varying weather conditions, ensuring uninterrupted connectivity.Another notable feature is its Power over Ethernet (PoE) capability. Supporting the 802.3af standard along with a passive PoE injector, the bridge can be powered conveniently using a single Ethernet cable. This setup reduces the need for additional power outlets and simplifies installation, especially in areas where power sources are limited. The PoE design enhances flexibility in mounting options, allowing the unit to be placed at an optimal height for improved signal transmission.Security is also well addressed in this device. It supports WPA2 encryption, preventing unauthorized access and ensuring a secure wireless link between network locations. Additionally, built-in protections against signal interference and frequency congestion help maintain a stable connection in environments with multiple wireless networks.When it comes to maintaining the unit, the WiFi bridge requires minimal effort. Once installed, it operates reliably without frequent adjustments. Firmware updates can be performed when needed through the user-friendly web interface, ensuring that the device remains secure and up to date with the latest enhancements. The sturdy build quality and efficient heat dissipation further contribute to long-term reliability.For users seeking a dependable, high-speed wireless bridge, this device is an excellent investment. The combination of long-range connectivity, plug-and-play simplicity, and durable construction makes it a practical solution for extending a network without complex wiring. Whether used for remote surveillance systems, outdoor workspaces, or extending internet access to another building, it delivers consistent performance and excellent value.Overall, this WiFi bridge excels in quality, ease of use, and connectivity. Its ability to maintain a strong wireless link over long distances while offering Gigabit Ethernet support ensures fast and reliable network access. The weatherproof design, PoE compatibility, and straightforward setup process make it suitable for both residential and commercial applications. For anyone in need of a long-range WiFi bridge that performs exceptionally well with minimal setup hassle, this product is a top choice.

I like this because it uses 12V (PoE) power. Although it also ran directly from my switch at 49V (the manual says to use “Lan 2” for this). For me, this means I can put it at the other side of the property and power it with a small battery and solar panel. I also thought it would be great to share internet with a neighbour and split the bill.I have a “72 Wh” 12 V (6 Ah) battery. From my readings each side of the bridge pulls 2.2-3.3W. At 3W, that little battery will power it for the day, and the 20W solar panel will easily charge it back up. Keep in mind you will also need a router to share internet if you aren’t looking to hardwire anything and I didn’t include those power calculations as yours will be different.Like everyone else, I do not have a 5 km line of sight to test it with, but it worked much stronger than my regular router for a 50m stretch from inside my house to inside an outbuilding (testing stage 2 - my internet speed is 25/50 and I received 23/45). During initial testing/setup - I was able to use it to “hard wire” my computer upstairs - which would also give me the ability to run hardwired security cameras (which I think is what a lot of people are going for). For me, it’s just to have internet throughout the property, and specifically at the far end, which is “only” a 200m distance.It comes with two PoE adapters (you can plug 12V right into the unit too, but using the PoE adapter gives you more “cord” length). The ethernet cable is a flat type, which doesn’t do well with the round cutouts they give you in the bottom of the unit. Either using a round ethernet, or having different cutout types would help with the insects/moisture that are going to find their way in there.

I have a couple of systems like this. So far, they work well,l but this is sold as offering a greater distance. While I do not have the ability to test it at a range of 5 km as advertised, it works great at the 1 km away location where it's installed.As with the previous systems, this is not user-friendly equipment to set up, especially for anyone who is not tech-savvy. If you are not comfortable with setting up a router this is definitely not for you. It works but is complicated to set up, and the manual, while half decent and screenshots of the setup process are included, is still difficult to follow.► As an example, the manual provides information on how to set up the various subnet options, not something most people who have powered up a WiFi router would have gone through.We need to get internet into a location out in the country where there is only power no phone or cable connectivity. The wireless service offered by a company that covers this area is super expensive for what amounts these days to a dribble for their offering. Our previous systems were installed in a cabin only about 100 meters away.Between the home and remote location is a direct line of sight, albeit there are some trees in the wayThe general setup, as outlined in the manual to configure each of the devices - master and slave, was simple enough to get sorted. The manual recommends connecting via wireless, but I prefer to use an Ethernet connection to my laptop. Then, we needed to connect to each via a browser on a PC or laptop to finish off the configuration. The settings described are only for getting the two devices, master and slave, talking. The rest is getting the master connected to the router, setting up the password and so forth. There is a bit of work that needs to be done in the browser. The good thing is that this can be done while connected to the slave/master via an ethernet cable. All of this took about an hour to get sorted. It would have taken less time if the manual had been properly written. It reads like someone who designed the system wrote it, someone who is very familiar with the whole setup and all of this would make sense. It does not read like an average person who was not involved in the system development and had to go through the setup wrote it. As such, it requires more experimentation than it should have to get everything talking.► There are some basic screenshots of what needs to be done, but it's still a complicated process.► The front-mounted LED light bar shows when the devices are talking and when there is a positive connection via the ethernet port.► Under the bottom cover, there are two LAN ports as well as a reset button and a 12-volt power receptacle.► The 12-volt option can be used if the POE injector that is included for each device is not used for some reason.👀 👀 👀 something to be noted - these devices are NOT to be powered up with 48-volt PoE switches/adapters. The included adapters to be used with the included POE injectors are 12 volts!🚩 While the kit includes two short (5-feet) CAT 6 cables, we had to source ethernet cables that were long enough to connect the devices at each end.The hardware.The kit comes with two POE adapters to power up the devices and, at the same time, provide an Ethernet port. I appreciate that the POE adapters are included rather than just a 12-volt adapter, which would require me to run the 12-volt cable extension and ethernet cable.Once set up and the two ends were pointed to within 20 degrees of each other, the connection is solid. If I run a speed test in the home inside WiFi and then run a speed test off of the remote router, which is bridged via this system, I get speeds that are almost identical. I say "almost" because there is always some fluctuation, but the remote site WiFi (second router) shows no slowdown.► The master can serve more than one slave unit as long as they are within a 60-degree radiation pattern.► In the remote office we use a router in access point mode connected to the slave.When setting up the master on our router, we had some issues with the router's WiFi disconnecting. After resetting the router with the master connected and powered up, the problem resolved itself. This happened with the other systems as well, and I still don't understand why.The kit includes mounting options - large white tie wraps that can be used when mounting these on pipes. The kit also includes fasteners for direct wall mounts if desired and if the angles match up. For us, as with the other systems, mounting them flat against the walls would not allow them to be pointed toward each other.Overall, this provides a solid and fast connection between a base and a remote location that would otherwise not have WiFi. The kit includes everything needed for installing the devices and the price is decent.

As we hunker down in the midst of winter, I've had the opportunity to temporarily test out the BrosTrend 5KM WiFi Bridge. While the frosty weather has prevented a permanent installation, this brief trial has given me a tantalizing glimpse of its potential for enhancing our farm's security setup.First and foremost, the ease of setup is a real winner. Even with my limited tech savvy, I managed to get this bridge up and running for a test run without breaking a sweat. This bodes well for when spring rolls around and I can finally mount it permanently. The plug and play nature of this device is a godsend for those of us who'd rather be tending to our crops than fiddling with network configurations.The promise of a 5KM range is what initially caught my eye. Our property is sprawling, with security cameras dotted all around; from the barn to the far reaches of our fields. During my temporary setup, I was impressed by how it maintained a stable connection to our chicken run cameras, which are a good 400 meters from the main house. The 5GHz band and 867Mbps speed capability suggest that once properly installed, this bridge could be the missing link in creating a comprehensive security network for our farm.I'm particularly excited about the two Gigabit Ethernet ports. This means I can connect multiple security cameras at remote locations without needing additional equipment. The flexibility of power options, with support for both standard 802.3af PoE and the included passive PoE injector, is a nice touch that'll come in handy in various parts of our property.However, the device is on the bulky side, which might make it a bit of an eyesore when mounted. I'm also a tad concerned about how it'll hold up against our harsh weather conditions in the long run, though the outdoor rating is promising.Another potential issue is the 5GHz band's susceptibility to interference from obstacles. Our property has its fair share of trees and outbuildings, which could pose a challenge. I'll need to be strategic about placement to ensure optimal coverage for all our security cameras.I'm planning to use this bridge primarily to create a robust network for our security cameras. From monitoring the chicken run to keeping an eye on our storage facilities and field boundaries, this device promises to be the backbone of our farm's security system. The long-range capability also has me considering expanding our camera coverage to some previously unreachable areas of the property.In conclusion, while the winter chill has prevented a full-scale deployment, the BrosTrend 5KM WiFi Bridge shows immense potential for revolutionizing our farm's security setup. Its ease of use, long-range capabilities, and versatile connectivity options make it an attractive solution for our sprawling property.However, its size and potential vulnerability to physical obstacles are factors I'll need to carefully consider during the permanent installation. As soon as the weather permits, I'm eager to fully integrate this bridge into our security network and finally achieve the comprehensive coverage we've been aiming for. It might just be the key to giving us peace of mind, whether we're checking on our chickens or securing the far corners of our fields.

I have a pretty big backyard and I wanted my wi-fi to extend to the whole place so I and the kids can listen to music and use our phones without getting out of range from the wi-fi. This extender works a charm! It's very very efficient, easy to install and safe. Once the set-up is made you can forget it exists and just enjoy a strong signal no matter where you are! It also made a good different in the basement, as some area were not perfectly stable. Now we don't have trouble anymore. As we pay to get unlimited internet, it's worth the small investment so we can actually get the full benefits of our connexion!

I got this wireless bridge to connect an outbuilding to the main network in my house. I started by tying the AP to a support column and the client to a fence using shoelaces; I plan to do a better job long-term, but it's good enough to make sure they work before going to more effort.Once I plugged in each station and powered them up, they paired with the default configuration and a pretty good signal strength. I definitely don't have them anything like 5km away, I'd say it's more like 20m, but there is a window in between and I didn't really have the means to aim them well. I assume that the signal strength profile of a highly directional device like this is a fairly tight cone, so being 10 or 15 degrees off might make a big difference. Still, I'm seeing around 12-20dB signal to noise and a typical link speed of 300Mbps with barely any latency. This is more than good enough to take phone calls and use remote desktop applications, so I can use the setup for remote work. I tested some bulk file transfers to be sure and am getting about the rates I would expect.The default configuration works well for what I would assume is the typical use case, a point-to-point "wire-like" link. Unless I am missing something, it does not seem to be able to carry multiple VLANs. There is a page for VLAN settings which allows you to designate one wired port as a trunk and the other as an access port, but the WLAN itself seems to only be capable of acting in access/single VLAN mode. Wireless settings are fairly comprehensive and have good defaults, except for the somewhat odd decision to use WPA1/WPA2 mixed mode instead of the more secure straight WPA2. There's a basic MAC-based access control menu and the ability to change the default admin user/pass to something else. I would recommend making use of that option and disabling WPA1 for security purposes, but otherwise the defaults work well so setup is very easy.At around $100 after coupon currently, this bridge seems fairly price competitive with other consumer-class units. I don't think it's ideal for enterprise use given the lack of any central management or AAA features, but if you just need a straightforward link across a wide expanse I think it could serve you well.