Your cart is empty.
Your cart is empty.Product Description
Waterproof
The surface of the antenna bracket is painted with a waterproof cap on top, thus preventing rainwater from entering the bracket and rusting. This makes the bracket waterproof can withstand rain and prevent rusting with proper installation
Packing List
1* bracket
2* hoops
4* screws
Two installation methods
Hold pole：
1. Loose the hoop
2. Tie the pole and the bracket with the hoop
3. The installation is complete
Wall-mounted：
1. Remove the board
2. Align the four screws with the four holes respectively and fix them
3. The installation is complete
Antenna mounting pole
Specifications:
Brand: ULNA
Classification: CPE Bracket Mount
Installation Methods: Hold pole and Wall-mounted
Adjustable angle: 150°
Waterproof Performance: Yes
Length: 25cm(0.82ft)
Color: White
Rust prevention
Sheila
Reviewed in the United States on May 31, 2025
As described, well packaged and scratch free.
IP Guy
Reviewed in the United States on February 26, 2025
Cheaply made braket. The wing nuts cannot be tightened enough to hold the pipe from swing down with a antenna weight of 1 lb. The wing nuts will break loose and strip the threads
Ernest D Harvey
Reviewed in the United States on February 24, 2025
About this product to support my wireless solar CCTV cameras. I love the way they mounted to the wall actually hung them from my gutter spout but the design has flaws. As you can see from the photo the Wingnuts broke on me trying to tighten the swing joint. Had to replace those Wingnuts because I could not get them tight enough to support a lightweight . Replace the wing nuts with screws that I could tighten. Still wasn't able to tighten enough without the pole swinging down from the weight of the camers. As you can see from the photo I had to add a lock screw. Now the product works with my cameras. Again, poor implementation. I would recommend knowing you will have to modify.
TBird
Reviewed in the United States on June 25, 2024
Thin painted steel construction that will not handle harsh environments but overall good deal for average diy to mount lightweight PTP antennas and WI-FI AP extenders. Recommend mounting poles under eaves of buildings to reduce water and sun exposure. Each pole comes with 2 stainless hose clamps which work great to secure antennas to poles. Would have rated higher but mount screws are very soft and will strip if you put very much torque on them. Overall good value for the price.
jean huot
Reviewed in Canada on June 20, 2024
Improved my tv reception from 39% to 79% by changing angle antenna which now captures sinal above the trees. Well priced.
Paul B.
Reviewed in the United States on May 15, 2024
Tube is a bit thin; you can easily crush it when mounting your antenna. The paint chipped pretty easy as well, so I expect some rust soon.
Just Electronics
Reviewed in the United States on March 27, 2024
I personally used it to install a couple of Ham Radio antennas in my attic. Worked perfect and the cost was affordable
Customer
Reviewed in the United States on March 21, 2024
Muy buen producto y a buen precio
Eric
Reviewed in the United States on October 24, 2023
Good mount for "point to point" wifi extenders. Allows easy installation and adjustment. Looks clean and weatherproof. Not much more to say.
Recommended Products