Your cart is empty.
Your cart is empty.Equip your bike for next-level adventures with the Burley Thru Axle. This simple to install adapter opens the door to new biking possibilities by allowing you to connect a kid, cargo, or pet bike trailer to bikes with 12mm thru axles
Monalisa
Reviewed in Germany on May 3, 2024
Alles OK leider die verkehrte Länge bestellt
kmuehter
Reviewed in the United States on October 15, 2023
I had a hard time getting this as there were supply shortages at the time. It did avvire on time though. The 1st one I bought was too short & I didn’t lube so it got stuck. I did realize that it has a slot for an Allen wrench on the other end so I broke I broke it off in the daileur hanger & had to buy a new one. I was inpatient & bought a a cheap one from another manufacturer that was the wrong thread pitch so I returned it got another to use until I got the burley which I like better because it come with a piece that goes over the treads &fits through the hitch. I also think the burley is made better.
Freya Helgemo
Reviewed in the United States on April 5, 2022
There's a site that helped me find the right size Burley Thru Axle Adapter and it was right on the money. Just tried it out this evening with my new Mountain Bike and it worked like a charm. I did find it curious it said not to ride with the axle full time but it's easy enough to swap back and forth (plus less weight when doing trail riding).I have a 12x148 1.75 pitch axle so I did not need the included spacer (which the directions cover).
しゃまきち
Reviewed in Japan on August 20, 2021
純正品が欠品中で3ヶ月待ちでしたのでこちらで購入しました。価格も純正と同じで高いですね。偽物の心配もしましたが、アメリカ直送で多分本物？問題なく使えています。交換も簡単であっという間。金具があるので滑り止めでモンキーレンチとトルクレンチ両方入りますよ。
Peter Bauer
Reviewed in Germany on June 5, 2021
Habe es an ein Cube Ebike montiert und passt sehr gutFür einen Anhänger von Burnley sehr gut geeignet
Dave
Reviewed in the United States on May 20, 2021
As with all the other complaints, it's on the expensive side. Other than that, it's perfect. It has a Syntace adapter to fit bikes that use that type of axle. M12x1.0 was a perfect fit for my BMC Speedfox.
EE
Reviewed in the United States on October 15, 2021
I ordered this twice. The first time the thread didn’t match my bike frame so make sure you get the right thread size. The most common sized I believe are 1.0 and 1.5. Also measure the length of your current axle to know how long to get it.The shaft is long and the wheel was loose so I added a couple of washers to make sure there was no extra play and it works like a charm.I’m giving it 4 starts because a product this expensive should come with more than just one spacer.
Xavier
Reviewed in Spain on December 3, 2020
Para mi specialized Levo HT va perfecto, no es no caro ni barato, sencillamente es lo que hay si quieres llevar un carrito con tu bici de eje pasante de 12, ya lo he usado varías veces y ningún problema, eso si, antes de pedirlo aseguraros de las medidas correctas, tanto de longitud del eje como paso de rosca
S. Smith
Reviewed in the United States on December 2, 2020
When installing add a small amount of grease to the treads and gently twist as if you are loosening until you hear a slight click. The threads are then aligned and can be tightened. The picture shows that the mating wasn’t correct when it was tightened. If you don’t have grease, any bike shop probably would put a little on if you were grateful
cheezburgrmania
Reviewed in the United States on March 11, 2019
This thru-axle ups the utility of the bike in your stable that could pull a trailer if only you had this product. It allows a thru-axle utility bike to pull a Nomad or a Bee trailer.It works to perfection. I've pulled my trailer at capacity (100 pounds) with no problem.
Neil
Reviewed in the United Kingdom on February 17, 2019
Purchased after endlessly looking for something that would fit an older model croozer kids carrier. Only other place was a very expensive American company.I was really surprised how rare 12mm axle adaptors are where most are designed to work with quick release axles.The axle fitted perfectly on my MTB after confirming axle length and thread width. The spacers provided helped give it a good fit.It was tested out on a road and tow path style off road, no problems were encountered.I know its quite a niche market but if your after a croozer axle for an MTB with a 12mm axle. Look no further!
edward b
Reviewed in the United States on May 29, 2018
Carbon frame with thru axles meant I wasn't able to tow my burley trailer on my new bike. but then I found this and it works great. the hitch doesn't touch the paint and the axle fits perfectly though my rear hub and threads into the frame
Crosley B. Jackson
Reviewed in the United States on September 26, 2017
I called my local bike shop to ensure I was buying the right size (they didn't have it in stock or anyway to order it). Works as advertised and allows me to attach the hitch so I can tow my son in his Burley trailer. Only snag is you really need the new style hitch attachment as the older style was designed for skewers and hence a smaller nut. This thru axle design requires a nut to attach the hitch and thus getting a wrench or socket on it with the older designed hitch is tough.
Recommended Products
