Your cart is empty.
Your cart is empty. A set of 4 corner clips: save labor time and reduce surface workload. Not only for 90 degree angles, but also for 45 degree saws.
The multi functional corner clamp is suitable for fixing 5-22mm/10-22mm board.
Can be used for one-hand operation, the corner clamp that is durable is easy to operate when using.
Made of high quality material, the corner clamp is durable and has a long service life.
Suitable for woodworking, cabinet and furniture repair connection, photo frame reinforcement, wooden DIY project, etc.
SChain
Reviewed in the United States on April 1, 2025
These are the least expensive set-of-4 corner clamps I can find. They work as intended but the spring is a little too strong and the sliding moveable "arrow" together makes single hand use a little difficult. Definitely worth the price I paid for them.
Carlos
Reviewed in the United States on December 19, 2024
Does what is supposed to do, really nice and sturdy
Barbarian
Reviewed in the United States on December 10, 2024
I found these to be difficult to use. The spring is very stiff so positioning them takes a bit of time. If you are using it on four corners you could end up with dried glue before they are all in place. They also do not guarantee a tight and square corner unless carefully fitted. I guess the best use would be one or two as a "third hand" until you can get your clamps or fasteners properly placed.
Charlie
Reviewed in the United States on May 21, 2022
The media could not be loaded.
Jonathan Guthrie
Reviewed in the United States on March 12, 2021
Great product, easy to use. Not for woods under 1/4". I recently built a 1/4" thick, oak, 4 switch amp pedal for my guitar amp, and they helped me create the perfect rectangular shape with no difficulty in squaring!
Mister M
Reviewed in the United States on July 18, 2020
I am not a carpenter or anything like that, I simply purchased this device to do some wood work activities with my kids during this COVID-19 pandemic being stuck here at home and I like this tool a lot and wish I had another set.The clips are really well made, so far that's the impression I have by using them the times we built a bird house. They don't feel cheap and I hope they will last me a long time. Like I said, I don't see myself using them every single day but so far they DON'T feel like junk.
Kath 0031
Reviewed in the United States on October 31, 2020
It works well. I did not use mitered corners for my box making projects. Since the clamps keep the area at the corners open, it would be easy to add additional screws, if you wanted too. I only used glue for my projects..The spring clamps provided sufficient force to maintain position of the boards once the clamps were in position. It was initially difficult to get boards into position, but the clamp kept them in place. I did not need 3 hands, I used the 4 clamps instead. I also like that I can use different thickness boards with one set of clamps. Either 3/4 " or 1/2" thick boards can be used. You can even use 3/4" thick pieces for the ends and a 1/2" thick on the sides.In my initial search for small corner clamps, I went to the Rockler store online site. However, their clamp had no springs and would only allow construction of corners with wood that both side pieces were of equal thickness. There was no adjustability of the thickness. They had a set of clamps for 3/4" thick stock, and another set for1/2' thick stock. Each, are a separate purchase. I read their reviews and was surprised by a few negative reviews especially one review of the Rockler clamp that broke with a short fall. I took a gamble and purchased this set of clamps. I am happy I did.Because they were so easy to use, I later did a second small project. ( without these corner clamps, I never would of tried the project.) I was able to maintain position and apply some pressure for gluing a 1/4" board to a 1" board. The 1" board is 25 mm across. Package stated 22mm size was maximum. However I checked with a ruler and cheap calipers. It worked for my 1" board, but I added another spring clamp to apply more pressure to hold the 1/4" to the 1" board. I am impressed. I increased my rating from 4 to 5 stars. I hope they are durable. They are mainly produced from a hard plastic but the springs are steel and produce a good pressure.Packed in a small square sturdy cardboard box. They are easily repacked so I will be using the box to store them in. Shipping was quick.I paid about a little less than $10 for the 4 pack. I include this info as prices go up and down. And if products get good reviews, the price goes up. A good value at $10 may be overpriced at $20.
Stephanie & David H
Reviewed in the United States on October 27, 2020
These clamps work well. They’re a bit smaller than I was expecting, so be sure to check the thickness of the wood before you buy these. The springs are tight and keep a decent grip on the wood. They’re relatively easy to adjust once they’re on. Getting them on is not easy. My wife had trouble pushing the spring down to get them on. It wasn’t easy for me to get them on either.Overall, I’m happy with this purchase. They work and it has made my woodworking tasks a lot smoother. Allows me to be more precise with drilling and framing the way I want it to be done.
Recommended Products
