Your cart is empty.
Your cart is empty. Specification:
Uses: Applicable to all kinds of industrial sewing machine clutch motor use
This item is for one pulley for industrial sewing machine. Size 45mm-80mm are solid; size 85mm-120mm are hollow.
Material: aluminum
Diameter: about 15mm/0.59"
Groove depth: about 28mm/1.10"
Thickness: about 15mm/0.59"
Shaft length: about 28mm/1.10"
Outer diameter: 45mm/1.77", 50mm/1.97", 55mm/2.17", 60mm/2.36", 65mm/2.56", 70mm/2.76", 75mm/2.95", 80mm/3.15", 85mm/3.35", 90mm/3.54", 95mm/3.74", 100mm/3.94", 110mm/4.33", 120mm/4.72"
Package included:
1 x Industrial Sewing Machine Timming Transfer Wheel
Notice:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures. Please make sure you do not mind before you bid.
2. Please allow 1-5mm differences due to manual measurement.
3. Thank you for your kindly understanding.
richard lachance
Reviewed in Canada on April 13, 2025
Super correct
Customer
Reviewed in Canada on August 7, 2024
Excellent fit, decreased the speed of the machine
1hot57
Reviewed in the United States on March 21, 2024
Pulley wood not fit the shaft ! Upon measuring I found that the bore was tapered and the key way was only cut a third of its needed depth! If you don’t have a machine shop u can’t use this junk!
Wilfredo Mirabal
Reviewed in the United States on November 5, 2024
Michael Ayukawa
Reviewed in Canada on November 29, 2024
Works OK. Not cleanly machined and a bit wonky. But does the job. The key did fit in fine. Just compared to the one that I had, looks like it is cast and simply sand blasted or tumbled to finish. No complaints though, given the price.
Dale
Reviewed in the United States on November 26, 2024
I put this on my Consew 206rb5 and it slowed it down nicely. Makes tight work a ton easier. Matches right up. If you’re doing the same you will need a bit longer belt.
Murray
Reviewed in Canada on February 16, 2023
Excellent slows down the machine
Mikel
Reviewed in the United States on October 27, 2023
My husband was able to use this to slow the speed of my industrial sewing machine so I could control my stitches even more.
S.k
Reviewed in India on August 10, 2021
I order of 45mm pulley but actual came 40mm pulley .write on pulley is 45 mm but I checked by measure tap and found only 40mm
Marilyn R.
Reviewed in the United States on February 10, 2021
I'm new to industrial sewing machines so when I bought mine I already knew I needed a servo motor to slow things down. I researched online a bit before making my purchase of a 750W Consew servo motor. Several sewing forums suggested, that to really slow things down, I won't be happy until I also purchase a speed reducer at around $130, (like I'm rolling in the dough after an industrial sewing machine, and a servo motor purchase).I came across a couple of you tube videos that suggested a 45 mm pulley to replace the 75 mm pulley that comes on the servo motor. I opted for this $8 pulley. I've never done a pulley replacement before, but a you tube video and an allen wrench made it do able. Took me less than 5 minutes. I can get my machine to a stitch at a time now. Everything fit perfect, even tho I wasn't even sure what size the spindle on the servo motor was.I am very happy with this purchase.
Brian Dal Ponte
Reviewed in the United States on January 31, 2021
Does the job and gives my machine that extra bit of slowness and control I was looking for. It was kinda banged up when I got it but it doesn’t affect the function. Shipped faster than they originally stated as well. Just needed to buy a shorter belt, 2” shorter than the one I used with the pulley that came with my machine (75mm)
Erwin
Reviewed in the United States on July 22, 2020
Updated review:Though the 120mm provided a lot more speed, we noticed the stitches were not consistent so we replaced it with the 95mm pulley and that works better overall. It's faster than the 75mm and we get consistent performance from the Juki. Sometimes you need to find out through trial and error. Good thing is that these are not expensive. The 95mm shipped was used, but nothing that detracts from working properly and not worth deducting a star.Original review:Install was straightforward. Replaced a 75mm pulley with this 120mm pulley. Works exactly like expected. It's a whole lot faster. Maybe too fast for most, but the Juki DDL-8700 is built for speed. Outstanding!
JR99
Reviewed in the United States on August 30, 2019
Just purchased this pulley to slow down my Consew 1206 with the Consew servo. This fit perfectly and did the job. Note: The Consew 550 watt servo has a 15mm shaft as others probably do. A 5/8 bore pulley will not fit correctly. This one is a 15mm bore and takes about 2 minutes to slow these race horses down. I added a 1.25 in space between the motor and table to get the belt tension correct.
Recommended Products
