Your cart is empty.
Your cart is empty.
This 12V Inline Rocker Switch is an ideal item for controlling LED Strip Lights on and off.
It uses a standard 5.5 x 2.1mm DC barrel plugs to fit in between your 12V DC power source and an LED Light Strip with no cutting or wiring needed!Simply plug one end to the power supply, one end to the strip and away you go!!!
Product Features: Standard 5.5 x 2.1 mm DC Jack
Package Includes:
2x Inline On Off Rocker Switch.
Citizen Groove
Reviewed in Canada on March 17, 2025
Use 1 to switch dartboard lighting and 1 to switch off a sound module on a pc.
Noname
Reviewed in the United States on April 24, 2025
My inexpensive not-actually-fully-isolated power supply works fine with my pedals but lacks an actual switch. This also lets me plug/unplug the adapter more easily since the jack on the PSU is harder to reach - this acts as a short extension.
Joe C.
Reviewed in the United States on April 20, 2025
Worked well to control various LED strip lights. Mine has held up for well over a year with no issues at all. The connections fit tightly with a variety of other products, too.
Pierre Beaulieu
Reviewed in Canada on January 19, 2024
My wife bought one pack of these switches and only on of the two switches worked. So we returned them and ordered a second pack. Well, guess what? Neither of the two switches from the second pack would work! So they are also being returned. This is a perfect example of very poor quality control. These in in-line Switches don't even deserve a one star rating.
Annabelle Vargas
Reviewed in the United States on July 31, 2023
This item will work on the Goxlr audio mixer if you own one you know it will not turn off when computer is off. I was looking for a switch that I might have to tap into but this one I took a chance and it worked like it was made for it. Now I can turn off audio mixer when I'm not using it.
Customer
Reviewed in Canada on July 6, 2022
Listed as DC inline Switch and labeled as such but the product (the physical switch) is rated for AC power. It's not a DC Switch!!!
Jesse
Reviewed in the United States on May 21, 2022
The switches don't seem to work with the Base Station / Lighthouse 2.0 units that came with my Vive Pro 2. Tried both switches on both base stations and they didn't get power.A quick test with a multimeter did confirm continuity when the switch was in the on position so they seem to work but maybe the connector is not quite right. In case anyone was wondering, the outer contact (usually ground) is NOT switched, it is always connected. Only the center pin gets switched.
Scott L Rittenhouse
Reviewed in the United States on January 12, 2022
I bought this as a switch for a arduino board laser engraver that did not have a shutoff with out unplugging from the wall. It does as it should and cuts the power off without unplugging. Just wish there was a couple more inches of cable between the board and the switch but all in all it works as it should.
Mick
Reviewed in the United States on March 27, 2020
I used this for some FPV First Person View goggles used in the drone industry. The EV200D goggles are FPV Goggles made in China (of course) that don't implement a power switch. They just power up when you plug in the battery, A money saving strategy obviously. But I wanted to implement a switch and these worked flawlessly. Even got lightly rained on on in the field once. Recommend for sure although I don't believe these have an IP rating
Charles Poitras
Reviewed in Canada on December 21, 2020
I used them for my VR basestations to turn them off when they wouldn't want to work with bluetooth.
Gibson59
Reviewed in Canada on August 8, 2019
Works perfectly for my guitar pedal which does not have an on/off switch. Now I an leave it plugged in and simply hit the switch to turn device off!
August
Reviewed in the United States on August 5, 2019
These switches plug in between your base station and its power cable so - if you can reach just below the bottom of a base station - you can easily install a manual switch and not rely on the unreliable Bluetooth sleep feature.
Robert Sjoberg
Reviewed in the United States on December 23, 2016
Who knew that such a simple product could make such a big difference? There is a lot of effort at holiday time to string lov-voltage LED lights around our place. With those lights the manufacturer usually includes a dimming control or a remote control with IR sensor, but nothing like just a simple switch. I used to make my own, until I found these beauties from available from Hualan. They are EXACTLY what I needed, just a simple inline toggle switch with a 12VDC male plug on one end and a female socket on the other. The connectors conform to the conventional form-factor of a 5.5mm outside diameter and x 2.1mm inside diameter that one finds on almost all commercial LED strip lights and other consumer LV electrical gadgets.The only caveats are (1) I have not tested these in outdoor environments, and (2) some plugs may be a bit loose in the socket, but a quick wrap with electrical tape will prevent a disconnection if the cord is pulled on a bit.You get two switches in the package for an extremely reasonable price. I could not find a better deal anywhere else.
Recommended Products
