Your cart is empty.
Your cart is empty.Product Description
DEWALT DW4765 4-1/2IN PORCELAIN TILE BLADE
From the Manufacturer
Dewalt DW4765 4-1/2-Inch Porcelain Tile Blade features an extended performance diamond matrix that provides long life and enhanced material cutting. The continuous rim design provides chip free cutting in all types of tile. The XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting, while the XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up. The premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
G.I. Jeff
Reviewed in the United States on January 8, 2025
Amazon convenience saved me a trip & had the best price (I recommend always comparing tool prices w/ “big orange”).
Mr N
Reviewed in the United Kingdom on January 28, 2025
This is such a good blade for cutting porcelain tiles. Very easy to get a nice clean edge and cuts really well. Not cheap, but well worth it.
Poodlegirl's other!
Reviewed in the United States on January 10, 2025
I used this for some tile cuts during a bathroom remodel.Works wet, or dry.One bathroom later the blade shows no wear.It's sure to outlast me.I'm going to list it in the will.
Si_man306
Reviewed in the United Kingdom on August 2, 2024
Superb, used to cut porcelain tiles with an angle grinder as a DIY'er. Very powerful, minimal wear and was recommended for this use. Would buy again (if it ever wears out!).
bushy2812
Reviewed in the United Kingdom on May 8, 2024
Cuts through porcelain tile with ease. Great product.
TBOttawa
Reviewed in Canada on October 25, 2024
Cuts a better than expected line - fairly clean. Does nice job in smoothing off any rough edges. No sign of losing its edge after about 15 cuts. Seems to work best with multiple shallow cuts.
M N
Reviewed in the United States on January 15, 2023
Have not used it yet but have installed it on tool. Blade runs true and am hoping it lives up to its write ups. Will reevaluate if performance is not what I expect.
Cindy
Reviewed in the United States on August 7, 2022
I bought this blade to use with my angle grinder for cutting ceramic subway tiles. It cut through the tiles like butter with nice clean edges for the most part. Any edges that were rough, I sanded with a file.
all41
Reviewed in the United States on February 21, 2022
It definitely cuts tiles. It's high quality but there are things you should consider:- had to pass over my cuts 4 times to cut through porcelain tile.- it leaves small chips in the tile along the cut (wet or Dry). that's ok for edges that will be covered under a baseboard but if your cut-side is going to be exposed, it will not look good.It was really handy to cut the toilet hole drain out of the center of a tile.
Peter
Reviewed in Canada on January 8, 2022
Perfect for my tile job
R. Klein
Reviewed in the United States on April 14, 2021
I bought this to help with a bathroom project requiring cutting slate stone tiles using an angle grinder. After watching some youtube videos, I ended up buying some additional protective equipment. Goggles, a protective face mask, and thick gloves. And a dust mask.The blade worked extremely well, cutting through the slate easily. The process generates a LOT of dust! But the blade itself was excellent for the job.
JT
Reviewed in the United States on December 21, 2018
I had a fairly large tile job, my first ever, to do in my home. I primarily used a full-size tile saw for all the big cuts and used this blade in my angle grinder for the smaller cuts. I also used it to rough cut bullnose edges which I then smoothed into final shape with 4" diamond pads (from Amazon) on a variable speed air angle grinder. I was totally pleased with this Dewalt blade. I also cut thru dense, hard concrete flooring with this blade in order to relocate the shower drain. It cut the concrete like it was made of butter.I also used Dewalt 10" diamond blades on the full-size saw, but I ended up having to buy two of them to complete the job.
Doug H.
Reviewed in the United States on December 29, 2016
I bought these blades to use on a cheaper wet saw I had. I am replacing the tiling round my fireplace. I am laying 12" marble tile. These blades come with a brass fitting so you can use on a 5/8" or 7/8" arbor. That was very useful.I cut very slowly and these blades were unbelievable. I had purchased two of these Dewalt blades, an MK (159402 MK-99) blade and a Concord blade (CTN045A10SP); but used neither of the other two. This Dewalt blade is awesome, and I'll use these for my next job(s). The cuts were straight, and I saw no chipping on the end of the tiles. To avoid the end of the cut chipping I did one of two things; 1) butted a scrap tile up to the tile I was cutting so the blade cut right into the next piece or 2) made a small 1" cut on one side, flipped the tile over and then made the long cut, and when the long cut met the first 1" cut it cleanly broke through.Hope this helps!
Recommended Products
