Your cart is empty.
Your cart is empty.
DIN Rail Mount Screw Terminal Block Breakout Board for Arduino NANO/MICRO. With the breakout board, you can easily extend Arduino projects to industrial control applications.
PCB mount Terminal Block: pitch 5.0mm/0.197", strip length 7mm, screws - M2.5, steel, Cr3+ Zn plated. pin header and cage - brass. Wire range 28AWG ~ 12AWG / 2.5mm square.
High quality Taiwan DINKLE Fireproof nylon material DIN rail mount carrier, can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use.
FR-4 fiber glass PCB, dual copper layers.
Note: the item not include Arduino-NANO or MICRO.
Charles M. Ihler
Reviewed in the United States on December 1, 2020
Good quality terminals — I like the setup. The DIN rail mount felt secure. I’ll buy more of these in the future. I used this with a Nano., it was clear and worked well.
Josh Cawood
Reviewed in the United States on September 30, 2019
The screw terminals are surprisingly the larger good kind. It uses the clamping style that moves vertically up and down instead of the cheaper kind that pinches the wire ussly, out of the block. So yea, no complaints thus far. It holds an arduino. It has screw terminals. Pretty much all you can ask for. :)
Carlie B.
Reviewed in the United States on August 24, 2019
As advertised.No soldering needed to get your project rolling.
Jonathan R.
Reviewed in the United States on August 11, 2019
Works great! Very well documented and designed. Works well in home and professional projects. Might suggest the UNO variant as it has mounting holes to secure the controller to the breakout, otherwise this one works perfectly.
Paul K.
Reviewed in the United States on July 21, 2019
Overall I'm pleased with this breakout module.It mounted easily to the DIN rail I was using (though removing it is a little difficult).The screw terminals seem pretty decent and they were able to accommodate my overkill 14awg (ferruled) wires.The only problem I have with it is that if you have two wires on adjacent rows, but in the same column, you can't easily access the screw to remove the lower one (if you're using a huge wire like I am).
Nando
Reviewed in the United States on December 3, 2019
Good mount. Strong grip. The clips are adjustable so it is comfortable.Check all the connections just in case: with mine one of the pins was not connected to the screws, so I thought that my circuit was faulty.
Manuel
Reviewed in the United States on October 25, 2019
As it advertises
Recommended Products
