Your cart is empty.
Your cart is empty.Direct store Parts Kit DN125 Magnetic Thermostat Switch for fireplace fan / fireplace blower kit
Sylvain Cinq-Mars
Reviewed in Canada on May 1, 2025
Fonctionne à merveille
Customer
Reviewed in Canada on March 20, 2025
Arrived on time working great easy to install
S C
Reviewed in Canada on February 24, 2025
Exact replacement for my fireplace part. Easy to install and works!
Lavern
Reviewed in Canada on January 23, 2025
It is easy to install, and due to the magnet it can be readily attached. Works great.
Thomas W White
Reviewed in the United States on April 18, 2025
Worked Great!
HARLAND P ANDERSON
Reviewed in the United States on July 20, 2024
good product
PR BC
Reviewed in Canada on December 25, 2024
Good price and easy to install very universal.
stacey brosamle
Reviewed in the United States on March 9, 2023
Quick easy install. Works perfect with my direct vent gas fireplace. I have my fireplace operated by a wall thermostat. The wall stat cycles the flames on and off while the blower stat Cycles the blower on and off. Perfect fit for my setup.
JKB
Reviewed in the United States on January 18, 2021
Add inline to your power cord to fan and attach it with the strong magnet to the surface needed to monitor the temp that you want it to turn the fan on and off at. Worked well.
Jim prime
Reviewed in the United States on February 12, 2020
This came to me late but once there it worked out as it states. The hard part is accessing the spot to remount it. That is a bit tricky but I got it. No issues. I started the fire and after a short while it engaged the fan. I did have my doubts about the magnet mount but it is a strong magnet. Try it you will see how easy it is to install. :)
David Grasso
Reviewed in the United States on January 24, 2018
I bought this item to make my manual blower switch on my fireplace an automatic one. This item worked perfectly and was cheap. Just splice into either line of your blower switch, find a suitable place on the underside of your fireplace or wood burning stove where the temperature will rise and fall according to your liking and your set. Now my blower turns on when the tubes get hot and turn off when they cool. No more going to bed and coming to find a ice cold frosty breeze coming from my fireplace blower.
jim beeler
Reviewed in the United States on April 19, 2018
Doesn't turn on as early as I would like but seems to be consistent in it's operation.
Johnny B
Reviewed in the United States on October 27, 2016
Replaced a unit on a Heatilator gas fireplace that wasn't magnetic and had no screws to hold it in place. This was a 5 minute job, the sensor is flush with the metal bottom housing. Two things to keep in mind: 1) DISCONNECT power to the circuit before installing. On my unit there is a wall switch to disable the fan which cuts power to the junction block. If the hot lead on the sensor touches any part of the sheet metal in the fireplace (which is grounded) you will short out the junction block where the fan power is provided. 2) Mount the unit with the magnet toward the back of the fireplace. This allow you to easily remove it again using the indented tabs on either side of the sensor. I've seen this part on the web for as much as $20 but the price I paid was $7.99 with Prime shipping. Works great so far!!
Recommended Products
