Your cart is empty.
Your cart is empty. Brand : ElectroCookie Inc.
PCB type: Double-sided
Surface finish: Gold plated to prevent oxidation
Color: Blue
Dimensions: 3.8"x3.5" (96.5mm x 88.9mm)
Hole Pitch: 0.1" (2.54mm)
Thickness: 1/16" (1.6mm)
Through hole diameter: 0.047" (1.2mm)
Mounting holes: M2 (Ø2.2mm)
Trace width: 0.04" (1mm)
CK
Reviewed in the United States on January 19, 2025
Each of these splits into four small boards that can be used for different small projects, so they’re not overly expensive. They come prescored btw.I used lead free solder and in cases where I had to desolder some components, the copper traces came off the board. Solder doesn’t stick to the PCB so it’s difficult to bridge adjacent contacts, so even for small runs, I have to use jumper wires.Otherwise, they worked perfectly for my circuits.
Jerry Tusch
Reviewed in the United States on September 3, 2024
I previously had purchased signals for my N scale model railroad. The fine wires from the signal kept breaking during installation. got these project boards, soldered the signal leads to it, then could solder the control wiring to the PC board without any breakage. The flat board easily hid under something to remain invisible. These boards are life savers for this kind of work, and they can be trimmed to size needed after giving thought to the need at hand. Definitely recommend!!
Jaymie Heintz
Reviewed in Canada on July 5, 2024
Simply the best little protoboards out there that I know of for a reasonable price, full stop/
Customer
Reviewed in the United States on July 18, 2024
These are super handy for building your own electronic circuits. The holes are nice and big to fit wires through, but not too big as to make it hard to solder. Love how they can snap apart too for different sizes. I was worried they may break apart too easy, but they're pretty sturdy.
Jason Willett
Reviewed in the United States on March 19, 2024
I absolutely love how the pins are connected on the back of the board in sets of 3 with a long connection on the outside which I'm going to use as my ground. I also love how you can customize the size you want and still have clean edges. The quality of the board is amazing and they even look good. Will definitely be using these in all my projects.
Barry
Reviewed in the United States on December 5, 2024
Makes a nice breadboard that can become permenant
Ronald V.
Reviewed in the United States on December 29, 2024
I do a lot of prototyping with atiny chips and ATmega328 cores. These boards are great for that and scale to any project well because you can choose multiple sizes from the cookie cutter feature.
Outlaw
Reviewed in Germany on October 14, 2024
Alles wie beschrieben
Raygunner
Reviewed in the United States on January 12, 2024
Nice and sturdy project board, easily modified by snapping into halves or even quarters. Plated through-holes a big plus.
2-bit reviewer
Reviewed in the United States on May 10, 2022
I build electronics for work, and by "build" I mean "bash together existing circuits to hopefully do something useful". Early in this part of my career, I found and really liked the solderable breadboards from Adafruit and SparkFun, but in past years I've been looking for something a bit more flexible without forcing me to create my own traces with solder. A strip board, if you would. That's where this board comes in.This is a grid of through hole pads connected 3 at a time on the back. The holes are nice and big to accommodate things like 5.08mm pitch large screw terminals (which you can't really fit on Adafruit boards with this pitch), and the exposed traces are nice because that gives you the option to cut them, and you get a nice big pad which means good thermal contact.One issue I've had with SparkFun boards is that the pad finish tends to tarnish quickly, over the span of a year or so. These pads appear to use a good quality ENIG finish which means they're like Oshpark boards, shiny even after a couple of years stashed in the back of a drawer.A bit pricey compared to some of the other options out there, but these are good quality.
IainM
Reviewed in the United Kingdom on January 14, 2022
Oh man, it's hard to explain how good these are. I had been struggling with single hole perf board and was really fed up. I came across them and ordered, "just to see". Honestly - what a game-changer. I scrapped the prototype I had been working on for a week on the original single hole perf board and had it rebuilt on these boards in an evening. 2 things i really like 1) It's really easy to replicate the breadboard layout (which is really handy for a relative noob like me). 2) The snappable design means they are incredibly flexible for different types of projects. If you are into electronic projects these will become one of your favourite projects.
Davide Perini
Reviewed in Italy on September 16, 2020
Che dire, migliorano la qualità dei vostri progetti, qualità dei fori e del materiale conduttivo elevata, formato molto pratico per la maggior parte dei microcontrollori, traccia unica per positivo e negativo, molto soddisfatto.
Benjamín
Reviewed in Spain on July 28, 2020
Un poco caro, pero buen producto
Recommended Products
![Arduino Nano Every with headers [ABX00033] – Compact ATmega4809 Microcontroller with Micro USB, 20 Digital I/O, 6 Analog Inputs, and Easy Prototyping for DIY Projects](images/loading.gif)