Shopping Cart

Your cart is empty.

Your cart is empty.

Environmental Technology 00876 16-Ounce Fiber-Lok Non Skid Backing

Free shipping on orders over $29.99

$21.35

$ 9 .99 $9.99

In Stock

About this item

  • STOP SLIDING AREA RUGS: Run, walk or glide across your rugs and carpets with confidence using our Fiber-Lok Non-skid Rug Backing. It'll keep your floor mats or runners in place so you'll never slip over unstable carpeting again
  • EASY TO APPLY: Revive your old rugs with ease using our Fiber-Lok Non-skid Rug Backing. Simply brush the backside of your rug with a thin, even coat. The backing will appear transparent when it is ready to re-coat. Let it dry completely, and it's ready to go back on the floor
  • LEAVES NO STAIN: This air-drying anti-skid formula for area rugs, placements, or table runners is also completely stain-free. It leaves a crystal clear coat so you won't have to worry about ruining your carpet, or floors
  • MACHINE WASHABLE: This no-slip formula doesn't wear off, even in the wash! Throw your rugs in the washing machine knowing that they'll come out with their anti-skid features intact
  • COVERS 15 SQUARE FEET: Our 16-ounce non-skid backing covers up to 15 square feet of space, giving you more than enough to use on various sized carpets, rugs, and mats around your home


KEEP RUGS WHERE THEY BELONG! Our Fiber-Lok non-skid rug backing can be applied to new and old rugs with ease. Simply brush the backside of your rug or mat with a thin, even coat and our Fiber-Lok technology will do the rest. The backing will appear transparent when it is dry and ready to re-coat (two thin coats are better than one heavy application). Ideal for latch hook rugs, punch rugs, wall hangings, placemats, or table runners. Keep rugs in place and avoid accidents! It's a common problem in many households to have slippery floors. Mats or carpets won't stay in place and walking with slippers around unstable or slippery surfaces can be dangerous, making you prone to accidents. Thankfully, Environment Technology Inc. formulated its Fiber-Lok Non-skid Rug Backing to give you and your family safety and peace of mind. Designed to withstand curling and sliding, keeping the rugs in place and flat forever. This area gripper can be widely used with all types of floor such as hardwood, concrete or tiles. And it's durable too! Wash it or dry it, the Fiber-Lok Non-skid Rug Backing stays in place all day long. This durable anti-slip formula will keep carpets exactly where you want them! Fiber-Lok's non-slip backing also doesn't leave any stains or residue, which means you won't have to worry about ruining your floors, slides or surfaces when you apply this product around the home. Avoid accidents now and grab a tub of Fiber-Lok Non-skid Backing today!


Barbara Rambow
Reviewed in the United States on May 6, 2025
This is great for protecting a hand made rug from unraveling and skidding.
Terry Pearcy
Reviewed in the United States on May 5, 2025
It works & was easy to apply! It was the consistency of yogurt... very smooth. I used HALF the product on the backing of these TWO 20"x34" rugs. I only did ONE COAT. Before applying (with a small paint brush), I put painters tape around the edges, to keep them clean & removed the tape before letting it dry. Before my rugs slipped all the time & NOW THEY DON'T. I haven't washed them yet, so only think I will wash very gently, when I do. Spreads white & It dries clear overnight.
Anita L. White
Reviewed in the United States on May 20, 2025
I purchased throw rugs from amazon and they slid all over the floor. I purchased this item to help keep the rugs from slipping. However, this product wants to peel off from the back of the rug. Now I have a real mess as the product does not work. I am very disappointed in both of my purchases.
Ellie Hall
Reviewed in the United States on April 27, 2025
Used to coat the back of rugs
Wanda M.
Reviewed in the United States on April 20, 2025
I love this stuff, carpet tape and all that other stuff does'nt work like this. I croquet rugs and this is aweome for them.I have all wood floors and none of my rugs move at all. I also croquet slippers and this works just as good. I'm gonna keep stocking up on this wonderful product. There is nothing else out there in my book.
Ziggy
Reviewed in the United States on September 9, 2024
I needed to fix my slippery bathroom 10 square feet rug. It was easy to apply with a paintbrush. However, it barely covered my rug with single thin coat. My rug button was heavily damage with many bold spots. I would need the second box to cover with the second coat. After few weeks the rug stays put.The fresh product has strong odor but the odor is gone after it tries. I tried my rug for 2 days before using.
Customer
Reviewed in Canada on December 12, 2024
I used this to re-back some carpets by my front door which were sliding around. It was easy to apply and has worked out great!
California Living California Dreaming
Reviewed in the United States on November 7, 2024
I have four chair pads with a rubberized grip finish over foam. The fabric side is still in good condition, the bottom not so much! I really don’t like throwing things out unless they’re completely worn, so I thought this would be a good repair. I’ve had the pads for four years and with daily use, the rubberized finish has partially cracked and worn off. They have also lost their “grip” and they were sliding around on the wood dining chairs. I previously tried to cut rug grip material to hold them in place, and it worked for about a week and then they started sliding around again. Happy to say that yhis stuff seems to have done the trick! I used a rubberized art painting tool to apply it and it went on perfectly. I was able to seal in the exposed foam also, it was like frosting over a crumbling cake in parts. I let it dry in the sun, where it dried fairly quickly. I might add it to the bottoms of a couple of rugs that I have also, because they also have stopped gripping. I’d say give it a try if you’re at your wits end.I applied it outside, it had almost a musty smel like mushrooms, didn’t bother me. Didn’t smell toxic, as I feared it might. Cleanup was easy, I just wiped the art tool with a paper towel.
Caroline Gilbert
Reviewed in Australia on August 21, 2023
This product needs to come in bigger sizes - 1Gallon
Kholood
Reviewed in the United Arab Emirates on December 25, 2023
I love it
Hosam
Reviewed in Saudi Arabia on March 3, 2022
لاصق عادي يسبة غراء الخشب لا يلصق جيدا و له رائحة غي جيدة
allison
Reviewed in the United Kingdom on January 12, 2021
I was very dubious about this product but had the old problem of slippery rugs on wood/laminate floorsIt is absolutely BRILLIANT and I am really shouting BRILLIANT,was applied and left to dry it WORKS no movement at all in any directionIt is so good that I have had to order some more to do more rugs,as I have already used a whole tubIt is strong smelling when it’s being brushed on with a paint brush but once painted on I placed it in a room with a window open while it dried and now there is no lingering smellThis product needs 5* plus does what it says on the tin
Elle
Reviewed in the United States on July 1, 2015
I think I had a mixed experience with this product. I work with a furniture company, and sometimes they toss fabric samples. So instead of letting them throw them away, I decided that I would take a few of the larger samples home and turn them into rugs. My research led me to this product, which I purchased around October of last year. I was really hoping to get a chance to use the product on other fabric samples than the two I used (which were a rough kind of polyester blend), but time ran from me. I’ll update this review if I ever get back to tying some of the other textures.PROS:-Well, it did sort of work, once I painted on 4 layers.-Didn’t scuff or scratch our floors.-I guess the amount in the tub is okay. I put 4 layers on two rugs, and I still had about half of the substance left over.CONS:-Dear God this smells terrible. Like something searing into your brain and nostrils. You HAVE to do this outside and with a fan running away from you or you’ll get lightheaded from the fumes.-Slow drying. Would take hours to dry each layer.-You’ve got to use a generous amount of product in order to cover the rug. I tried doing just the corners, but that didn’t work. Then I tried doing just squared lines, but that didn’t work. I ended up having to cover almost the entire back of the fabric scrap in order for this product to work.-Even after 4 layers, my roommate’s dog would still skid the rug across the floor when she walked over it. I’m not sure why I, who weigh more than the dog, had less of an issue.-Difficult to clean off the paintbrush. If I didn't completely wash and soap every scrap off, there were these rubbery strings stuck in the brush that essentially ruined them the next day. (And this WAS after washing them. I guess I just didn't do it well enough.)THE VERDICT:I never ended up washing it, so I can’t attest to how well it would stand up to that. I think it works better for smaller things (like slippers and boots), and thinner rugs that you may have. My rugs were probably at around ½ an inch in thickness, and I had to keep putting on layer after layer of this stuff on them. Even after 4 layers, it wasn’t completely non-stick. I’ll probably check out another product next time for my needs, to see if that ends up being any better.
Recommended Products