Jorkar External SSD Enclosure for Macbook 12+16 Pin with USB3.2 20Gbps

* Jorkar USB C 3.2 SSD enclosure Support up to 20Gbps transmission speed with USB 3.2 Gen2 interface if your SSD & the computer Both supports 20Gbps, Or just 10Gbps, 5Gbps according to your ssd and your computer.

*When macbook ssd connected to a Thunder bolt 3 or USB 3.1 Gen 2 port, both the read and write speeds can reach up to 900 MB/s.

* Compatible with a variety of operating systems, support for Windows 7/8/10 and for MacOS 10, 10.5 above operating systems.

* DO NOT Support NVMe Protocol; DO NOT Support Mac SSD with Built-in Heat System; DO NOT Suport latest macOS Sonoma.

* Notice:

It is compatible with MacOS, generally the hard drive will pop up on desktop. On Windows OS, hard disk will not available on "This PC" or "My computer", please find your hard disk in "Disk Management".

The SSD should be formatted if you want to use on Windows. (Format will delete all your files)

1. Insert drive and connect the enclosure to PC.

2. Hard Disk Initialization: Computer----Manage---Disk Management---find new disk and initialize (NOTE: Please choose MBR if the capacity of your disk is less than 2TB, choose GPT if larger than 2TB.)

3. Disk Partition and Format: New disk will become “Disk 1” after initialization, right click “Disk 1” and choose “New Simple Volume” to do partition, choose the capacity you need and choose “Formatting”.

Please note that format will delete all your files, please back up your files before formatting.

Jorkar External SSD Enclosure, New Life for old Macbook SSD

Jorkar USB C 3.2 SSD enclosure works well for Macbook SSDs with 12+16 Pins, for 2013-2017 MacBook Air, for 2013-2015 2017 MacBook Pro Retina, for 2013-2015 2017 iMac, for 2013 Mac Pro.

*Important*

NOT compatible with all SATA SSDs.

Specification:

1. Colour: Black

2. Shell material: aluminum alloy

3. Interface: USB 3.2 Type C

4. Transmission speed: up to 20Gbps, 10Gbps, 5Gbps, according to your SSD & your PC USB version.

5. Application: for MacBook Air 2013-2017 / Pro Retina 2013/2014/2015/2017

6. Product size: 107 * 40 * 14mm / 4.21*1.57*0.55in

7. Weight: 107g

Jorkar Portable SSD Enclosure, Fast, Efficient and Convenient

Attention:

1. Please make sure your SSD is from the following models: for MacBook Air / Pro Retina 2013 2014 2015 2017 built-in SSD (NOT for MacBook 2010 2011 2012 SSDs, and NVMe protocol SSDs are not applicable.)

2. The front USB interface of some Appl desktops and Appl notebooks have insufficient power supply (weak current), so some customers said that their PC can't recognize the SSD, or are unstable, easy to disconnect, or prompt an error. In this case, please buy a docking station or a USB Hub to solve the problem.

3. Do not move the hard drive case during use, and prevent collision with the hard drive. Do not squeeze the product with external force.

4. Non-professionals should not disassemble the product or repair it.

5. When disconnecting this external hard drive, you should exit safely. If the hard drive data is accidentally lost, we are not responsible to restore any data.

6. For Mac OS PC, the hard drive should be formatted with exFAT.

7. Your internal SSD needs to be re-partitioned for normal storage and copying, otherwise it may appear unrecognizable.

8. If high transmission speed is required, please plug it into a computer equipped with USB3.0 interface.

Overheating Protection: If your ssd overheating when transfer large of data, enclosure will run the overheating protection auto and change to read-only mode, otherwise stop transfering or down the speed to avoid your ssd damaged.

Aluminum alloy shell: full of texture, excellent heat dissipation.

Play&plug: Supports Windows, Mac system, strong compatibility, no need to drive. Support UASP with ultra fast transmission speed.

Jorkar Portable SSD Enclosure, Easy Installation

Just take out the PCB board from the enclosure, then fully insert SSD to card slot of the PCB board, then put PCB back into the enclosure and tighten the screws.

Adopt Type C USB 3.2 port and DC power port to provide stable power supply, no driver required, plug and play and support hot plug.

The SSD enclosure shell is made of aluminum alloy, surface oxidation sandblasting process provides comfortable feel, stable and drop-resistant, has good heat dissipation.

Small size, easy installation, fast transmission and convenient to use.

QA:

Q: Why doesn't the drive work after I installed it and followed the instructions?

A: Please check as follows.

1, If the indicator light is off, please check if the enclosure and device is firmly connected or if the data cable is damaged.

2, If the indicator light is on, please check if it is recognized in the system information, if not, the SSD may be damaged.

Q: Why is the MacBook SSD Enclosure very hot when it is running?

A: This is a normal phenomenon, SSD will generate a lot of heat when transferring data at high speed, the aluminum housing will conduct heat more efficiently, please install the rear housing during use, this will improve the efficiency of heat dissipation.

Q: Why does connecting other hard drives not work?

A: This MacBook SSD Enclosure is only compatible with MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017. other models of SSD are not readable, please make sure the hard drive model before use.

If you are using SSD with M.2 interface, we provide M.2 adapter, please follow the adapter in advance and then install the hard drive.

Q: Why does the connect suddenly break during the use of macbook ssd enclosure?

A: 1, First make sure macbook ssd is installed properly, better tighten the screws to make sure it won't be disconnected suddenly.

2, deselect “Put hard disks to sleep when possible” in both Battery and and Power Adapter.