Its a tray with sections, similar to a school lunch tray that separates the different foods. The tools get piled into one another. Theres arent slots large enough to fit the appropriate tools, only slits for i dont know what!! This is trash.

I bought this not knowing if it would fit on our stand. We have a Spin Doctor Pro G3 stand and it fit perfectly. I had to use one of the supplied shims, but it made it a snug solid fit. I put the tools that I would use in the slots and they all fit perfect. One of the holes for the T-Wrench was for a 2mm but my smallest one is 2.5mm, so I just took a drill bit and made the hole a touch bigger. No complaints yet because I have not had to clean the bikes yet. One good thing is that there is lots of empty area on the outer edge of the tray so if you needed more holes for tools, you could drill extra holes for more tools. Love the rag hanger.

I bought this item as a result of a reply on 2 separate products one of this product and one based on the tool I have which is a park tool prs 22 which is a bicycle repair stand that coincidentally is the exact same as a feedback sports repair stand, I won’t go into which came first the egg or the chicken.I am using this item with my park tool bicycle repair stand prs 22, I was looking for a tool tray and found that park tool was making it very difficult to get a simple tool tray in to their stand by having multiple different adapters to attach said tray to their many different repair stands. I then went looking for an easy solution. I chose this product as one person said that the park tool repair stand has the exact specifications as the feedback sports repair stand. It clicked in my mind to look up a tool tray for the feedback sport stand (sorry don’t remember that model number) the tool tray I found from feedback sports said it fits “all” their stands so I figured why not give it a try! With a few tools I was able to attach the clip to the shaft of my park tool repair stand. It might not be like the park tool tray but it works and wasn’t a hassle to get the special adapter for my stand which I couldn’t find anywhere, not even on any other 3rd applications.It works great and works with my park tool stand!

Great product for keeping the tools handy while attached to my bike stand. It’s well constructed.

IMHO is a well made product that does the job and buying it is a given. It's easy to fit onto the stand and comes with clear instructions.The best thing I like about the tool attachment is the little holes that you can use to clip on tools, meaning that everything you need for the job is at hand and kept tidy all in one place.

Mounted this on an older Ultimate support bike stand (the forerunner of feedback) Fits great and adds worthwhile functionality to the stand. Its solid, fits well and should provide years of use. It keeps my workspace clean and efficient and would recommend to anyone with an Ultimate and or Feedback stand. The coffee cup holder is a really nice addition to my early morning wrenching.

Pros: Saves time looking for toolsOrganizes what you need at handCons: Tends to slide down the pole over time

Gran prodotto, fighissimo appoggio per viti, parti o semplicemente per appoggiare lubrificanti o cose del genere. Si attacca al supporto per biciclette dedicato e non si stacca nè si abbassa più. Straconsigliato.

I just received this tool tray for my Feedback Sports Sport Mechanic Bicycle Repair Stand. I looked at several tool trays and selected this one since it was made for the stand I have.When shopping for this tool tray, I couldn't find any really good photos or description of how it attached to the stand and if it was adjustable. The photos here on Amazon do not get larger when clicking on the expanded view, they just opened in a larger window. I would like to have seen the inside of the wrench slots to see if they would hold my Snap-On wrenches and other tools. The photos on the Feedback Sports manufacturer's site weren't any better so I just ordered it up to have a look in person.The tray is decently sized and feels larger than it looks in the photos which I think is a good thing. I mounted it to the Feedback Sports Sport Mechanic stand to see how it fit and if there was good clearance to the bike if it was rotated inward toward the bike. I was able to mount the bike and operate the pedals without any interference. The tray itself is made from thick plastic that has reinforcements cast into the bottom side. It seems very solid and is about the weight and size that I would expect from a tool tray that is attached to the stand.I am disappointed with the attachment system for holding the tray to the stand. I was hoping that Feedback Sports had a more elegant solution for mounting the tray to the stand. The design of the mount is made so that it can be attached to either the upper or lower tube of the stand (each a different size) or to fit it to other manufacturer's stands. The attachment bracket is a split-collar design that has the built-in towel holder visible in some of the photos. This collar has two shoulders or lugs on it that fit into slots on the tray itself. When the tray is slid over this collar, it is supposed to tighten up around the tube of the stand. When fitting this to the Sport Mechanic stand, it seems to be at a good height when mounted to the upper tube so that you do not have to bend over to get to the tools. When mounting to the upper tube which is smaller than the bottom tube, there are 2 additional split collars provided which act a shims or spacers to take up the room between tube and the collar that actually holds the tray. The Sport Mechanic stand takes both of these spacers to allow the tray to snug up onto the stand. Since I will be storing the stand in the Feedback Sports tote bag when not in use, I will need to remove the tray and reinstall it each time I use it. I'm wondering how the durability of the collars will be with repeated use. I'd give it 5 stars if the attachment design were better and pricing was better. The collars need to be spread to fit over the tube so repeatedly removing these doesn't seem to be a good idea. All three collars can stay on the stand when folded and fit into the storage bag. The tray will not fit into the storage bag at all. You can see my review of the storage bag and stand here on Amazon.I've attached some photos of the tray and collars which should be helpful when looking at this tray. Overall, the tray seems to be what I expected although for the price of a plastic tray, I had hoped that the attachment method was better. I'd like to seem some better pricing on Feedback Sports accessories. After spending $160 to $265 for one of their bike stands, it's a shame that you have to drop another $63 for a bag and a plastic tool tray that other manufacturers include with their stands. I'll see how this tool tray holds up during use and post a follow up review if needed. I'll also review the stand and storage bag separately under each of these products.

Nice heavy duty tray. Using the supplied shims, you can pretty much mount the tray on any section of the Feedback Sports work stand. The tray is constructed of a very thick plastic that appears to be able to stand the test of use and time. The beverage holder in the tray is a nice touch. The only drawback is that it isn't compact enough to place in the Feedback Sports work stand storage bag. Minor gripe is that I am always trying to find a place to put it either for transport or for storage.

Lange habe ich mit dem Kauf gezögert, da der Preis ja nicht gerade verlockt. Doch der Halter ist seinen Preis wert! Er ist aus dickem Plastik, gut verarbeitet, stabil und hochwertig und bietet viele Ablageflächen für alle möglichen Werkzeuge und Schrauben. Auch das Ölkännchen oder den Fettbehälter stelle ich hier gerne ab. Der Halter lässt sich leicht drehen, stört also nicht während der Arbeit am Fahrrad. Man kann ihn an das untere und mit Adaptern auch an das obere Rohr des Feedback-Reparaturständers anbringen. Die Montage ist sehr einfach und vor dem Zusammenklappen des Ständers kann der Werkzeughalter ganz einfach wieder ausgehängt werden.Mein Tipp: Wer sich schon mit dem wohl besten aller Fahrradhalter "beschenkt" hat, sollte auch hier nicht knausern! Bei mir hat sich der Kauf schon bezahlt gemacht, weil ich keine Schräubchen, Kappen und Werkzeuge mehr verlege. Die kommen gleich in den Halter!

This fits on the Feedback bike stand and is very handy for tools and parts. Keeps me from loosing small parts. Seems to be a quality product,I am very happy with it.

スタンドに合わせて購入です。表のFEEDBACKは印刷ではなくラベルです、しかも斜めに歪んでました。装着方法には悩みました。１つ目の太めのスペーサーを下段のポールにはめてその上から強引にトレイを広げてはめ込む方法と、スペーサー２枚重ねで上段のポールにはめ込む方法があります。沢山の工具を載せてもトレイは下がりません。スペースは結構あります、ドライバー８本、メジャー、六角レンチセット、ソケット＆トルクレンチ3/8、圧力計、その他載ります。あまり載せ過ぎると移動に困ります。