Your cart is empty.
Your cart is empty.Foto&Tech 1/4" to 3/8" Convert Screw Adapter. The height is 5/16".
V. jogi
Reviewed in the United States on March 1, 2025
Excellent service
Daniel E.
Reviewed in the United States on February 15, 2025
Good quality, packaging and very fast shipping.
Izak K.
Reviewed in the United States on April 5, 2025
When you need this, it does the job.
DeeAnn R.
Reviewed in the United States on April 17, 2025
No notches on the top edge for removal. It has a slot on the bottom which can be reached by a skinny screwdriver, if you have a screwdriver of just the right size.
Patrick R
Reviewed in the United States on March 4, 2024
This does what it is supposed to: allow me to put my 3/8 inch ball head on my 1/4 tripod; however, threads seem loose. Also, when I screwed on my ball head then screwed it off, there were small metal shavings left in the ball head. The metal seems soft, but I think it will be ok for a camera tripod.
Customer
Reviewed in the United States on March 27, 2024
Adapted a camera mount. Screwed in slightly below flush, fit an holds well.
Review@Random
Reviewed in the United States on May 24, 2023
I have a tripod I wanted to use a fluid head for better panning (the old one tended to skip a bit), but the screw on it was the standard 1/4 inch size that also connects to most cameras. The head, however, had the larger 3/8 inch thread. This allowed me to pop on the new head and use it as desired.Simple. Effective. I have a few spares if I run into the issue again.
Alberto N.
Reviewed in Italy on August 30, 2018
Se avete filetti da 1/4 e dovete avvitarci qualsiasi cosa da 3/8questo accessorio è per voi indispensabile!Rispetto ad altri è quello piu' funzionale per via delle dimensioni costanti lungo tutta la struttura.Buona fattura. Consigliato
vitt bruno
Reviewed in Italy on January 3, 2018
Ottimo prodotto consiglio vivamente l acquisto.la riduzione non ha la battuta di fine corsa molto fastidiosa.prodotto non cinese. Ricevuto in anticipo
Jorge Donaire
Reviewed in Spain on January 22, 2017
Se trata de un sencillo juego de adaptadores de 1/4" a 3/8". Elegí este producto porque, a diferencia de otros que están pensados principalmente para reducir de 3/8" a 1/4" (por la ubicación de la muesca de apriete), éste, en cambio, aumenta de 1/4" a 3/8". Además, otros productos tienen un resalte en la zona de la muesca de apriete: en cambio éste no. En una de las fotografías que adjunto se puede ver la diferencia entre ambos tipos.El tornillo es metálico, su acabado es algo basto. En el lateral donde está la muesca de apriete, los recortes en el extremo de rosca y la muesca son puntiagudos y se enganchan y cortan fácilmente. Creo que por el precio que tiene, podría estar algo más pulido y con los bordes suavizados.Al apretar el tornillo con un destornillador ha quedado una marca por lo que parece que el material es demasiado dúctil.El producto contiene cinco unidades cada una metido una pequeña bolsita de plástico con cierre tipo ZIP lo cual es perfecto para evitar que destrocen la tela de la mochila con los bordes cortantes.En mi opinión el producto no vale lo que cuesta por calidad y acabados. Cumple su función.
Andrew B.
Reviewed in the United Kingdom on April 6, 2017
Rating: 5 of 5 good service items perfect no flange like on some others.
A
Reviewed in Canada on December 1, 2016
Item as described. For anyone else confused how this works, it literally turns your 1/4" screw (typically found on monopod/tripod heads) into a 3/8" screw (typically found on the base of separately bought tripod heads). What I did was screw this into the tripod ballhead I bought for my monopod with a screw driver. Notice how one end has a flat opening? That's where you put something (e.g. a flathead screw driver) and then start turning like you are putting in a regular screw. After the screw is inside your tripod ballhead (or whatever else you're using this for), you screw that object ontop of your original 1/4" mount on the tripod/monopod/whatever. Yes, you can put the screw in by hand, but you will not get a tight fit like this. An alternative would be to screw this onto the tripod/monopod mount, then the tripod ballhead/etc. ontop of it. In either case, you will likely need a flathead to remove the screw from whatever 3/8" item you're using.My only complaint is 5 screws is a bit much, and you definitely can find these on other third party sites (ebay, aliexpress, etc.) or even third party sellers on Amazon for MUCH cheaper. They honestly are all the same, but the difference is this is Prime eligible and I can't afford to wait 1-2 months.
MB
Reviewed in the United States on December 10, 2015
Quality appears to be good. I'm using this to connect a 1/4" Tripod connector to a Neewer 360° 1/4" ball head for panorama shots. It seems to work fine.I looked over several 1/4" to 3/8" adapters that could, potentially, work for this purpose before ordering these. I've just started using them but I believe these adapters will work well because:1. They will go deep enough and don't have a flange - so the ball head will fit flush - so it will reduce shake for longer shutter speeds2. The slot on the adapters are deep-set and hollow so it can be accessed from inside (as you can see in the photo I included). This will allow me to use a narrow (probably 3/8") straight slot screw driver to unscrew it if it should unscrew from the 1/4" connector inside the ball head.
Recommended Products
$49.99
$ 21 .99 $21.99