Your cart is empty.
Your cart is empty.Extra blade fits Blue Hard Small teeth 240. Vertical or horizontal - as you wish. It is light and the blade is thin and sharp suitable for professional use. Small teeth can also be used for workmanship. Great for construction and woodworking. You can change the blade angle. [Materials] Blade: SK material. Gyokucho is the premier Japanese manufacturer of high quality saws with a reputation for reliability and good performance at a modest price. We use a method called impulse hardening to increase the durability of the tooth tips. The cutting edge is heated for 0.003 to 0.005 seconds by applying an electrical current at super high-frequency of 27.12Mhz, instantly hardening the surface of the steel while maintaining the flexibility inside. As a result, the sawfs wear resistance increases. The surface hardness of the blade is approximately from Hv 900 to 1200. The hardened saw tooth is much harder than sharpening files so the blade cannot be sharpened and needs to be replaced once it is dull. All products have a name, blade thickness, the blade length, and even the extra blade part number marked on themselves. The marking is done by a laser irradiation method and won't wear off. So even when you lose the package, you can easily identify the products by checking its laser marking. Electro less nickel plating prevents the blade from rusting, and there is no need to worry cutting materials getting dirty with the rust. Also tree tar is hard to stick to the blade, and even if it does, you can wash it off with water. Suitable for use in coastal areas and even for store exhibition because of its rust-free features.
Lewis Buckle
Reviewed in the United Kingdom on March 24, 2025
I first came across these saws in Japan. Love them. Being a pull cut stroke they don't catch and bend like Western saws. Do cuts, after some practice, are very accurate. This blade is very hard and very sharp. It's keeping its edge well and it's been used predominantly on thick oak and Sapele.Loo e it,vrecommended
Haiku fernandez
Reviewed in Mexico on February 4, 2025
Buena calidad yuna excelente opción solo hay que cambiar la hoja cuando pierde el filo el cual es duradero cortes limpios no es la octava maravilla pero es una gran herramienta
Jansen
Reviewed in Germany on September 8, 2023
sehr gut. und auch richtig scharf .ist weiter zu emfelen
Michael W. Tulloch
Reviewed in the United States on August 5, 2023
I've been a high-end Finish / Trim Carpenter for over 40 years. I've been using this same brand replaceable blade Japanese hand saw for over 25 of those years. Keep the handle , and just replace the blade , to save little money . Highly recommended for the professional. For on the job use....and you can leave the higher priced handmade saws you may have , at home in the shop .
LFP
Reviewed in the United States on July 3, 2023
Excellent balance, a joy to use, and sharp even after sawing a house full of white oak. So sharp that when it fell on my wrist bone, it cut a beautifully clean line across the skin. It is absolutely one of my favorite tools still.
Mrchuck2000
Reviewed in the United States on June 24, 2023
I had really banged up my original saw blade with some stupid use, and was glad to know replacements were available. I even save a few bucks buying “used,” an only slightly scuffed open packaged blade. These are pretty good blades, really nice cut (just don’t try using it on brass—trust me).
Gopo
Reviewed in Italy on March 5, 2023
Perfetto come sempre.
Emre
Reviewed in Turkey on January 30, 2023
Açık ara kullandığım testereler arasındaki en iyi testere. Eğer ince işlerde kullanmak için alamayı düşünen olursa ryoba türü testereler genel kullanım için olduğundan kesim esnasında pala hareketi daha fazla olacaktır. Ölçü yaptığınız işlerde önemliyse sırt destekli diğer modelleri düşünebilirsiniz. Ayrıca malefesef ürün için gümrük vergisi çıkıyor
Curtis
Reviewed in the United States on July 9, 2021
Purchased to replace my worn out blade. This works great! Sharp, sturdy, and cuts fast. Buy it!
K. grey
Reviewed in the United States on October 17, 2020
This brand (Gyokucho) is the singular value in Japanese razorsaws. This combination of teeth is the best in this style of saw for a mix of hardwood and softwood. it's very sharp. it's perfectly made. It's a pull saw so it cuts straight and easily, unlike the nasty mitre saw you inherited from your aunt. The blade is thinner and the teeth last longer than a shark saw. If you are in construction you will appreciate this saw slightly more overall and regret slightly more (as well) when you saw a nail. But not as much as most of this species of tool.if you have not owned a Japanese razorsaw, you are missing one of the basic joys of human existence.Since this brand is hardened at the factory you will prefer to buy a new blade rather than learn the ancient yet tedious art of saw sharpening . That's what this product is - a replacement blade. Get the one with a handle for slightly more if you're just starting out. The blade will last you two years if you are a determined weekend warrior and much less than that if you use it on the job.
GMak
Reviewed in the United States on August 19, 2018
After years of use and unintentionally cutting into a few nails/screws I decided it was time to replace the blade on my Ryoba handsaw. I found this to be the best price and with Prime 2-day shipping I immediately ordered. Top quality replacement blade at a price lower than other sellers. Very happy with my purchase!
Mike B
Reviewed in the United States on October 12, 2018
Stays sharp for months if you use it periodically. If you use it daily it might dull a little quicker. I’d say I use it about 1-2 times per week and will last me a year. I’ve replaced one after about 15-18 months of use. For the money they’re amazing! They make light work of even the hardest woods.
carmine cirimle
Reviewed in the United States on August 23, 2016
Yes I like the product
Recommended Products
