Your cart is empty.
Your cart is empty. Hersmay Vertical Battery Grip for Canon EOS R5 R5C R6 DSLR Camera
Replace for Canon BG-R10 Battery Holder for Up to Two LP-E6 LP-E6NH LP-E6N Batteries
This battery grip is specially designed as a replament of BG-R10 battery grip to power R5 R5C or R6 dslr camera.
It is made of ABS and rubber.
Weighs only 278g / 9.8oz.
Connect to camera through a 1/4"-20 screw.
Also with a 1/4"-20 hole at bottom for mounting on a tripod ball head or elsewhere.
Multiple buttons available
Most buttons of the camera are also available on the battery grip:shutter button,AF-ON button,multi-function button,main dial etc.This would be very convenient for your working especially when shooting vertically.
It can hold up to 2 batteries of LP-E6 LP-E6NH LP-E6N at the same time,and this would greatly extend your camera working time.
Connecting to camera through a 1/4"-20 screw.(please take off your battery lid before installation)
There is also a 1/4"-20 hole at bottom for mounting on tripod ball head or elsewhere with 1/4"-20 screw.
Bring you different experience with different shooting method.
Package includes:
1 x Battery grip (batteries are not included)
Jay Boyd
Reviewed in the United Kingdom on April 14, 2025
Very happy with it and it cost a fraction of the genuine one. No issues so far
Davide Olivati
Reviewed in Italy on July 26, 2024
Si adatta perfettamente, non sarà lo stesso prodotto originale, ma anche il prezzo non è l'originale, che credo sia sopravvalutato. Tutti i tasti e le ghiere perfettamente funzionanti. Lo consiglio.
Paul Cassel
Reviewed in the United States on February 8, 2024
This device looked like it would be an excellent accessory to my Canon R6ii if it worked. It doesn't. I charged the Canon brand (OEM) batteries to full, measured the voltage of them to be doubly sure and then installed them into the battery holder. The contacts were showing through the relief cut so they could engage the battery holder contacts. All seemed fine but when turned on, the camera didn't power up.I checked the contacts at the extension that enters the camera body finding no power. I can't prove it, but I suspect a bad switch which infers very poor QA.There's no seller information on the box or printed on the instructions so there's no one to contact.One more piece of dead in the box garbage. What a waste.
Nebti20
Reviewed in the United States on February 5, 2024
The media could not be loaded.
Steven
Reviewed in Germany on October 12, 2024
Die Haptik ist sehr gut, die Verarbeitung macht auch einen sehr soliden Eindruck.Alle Knöpfe haben einen sehr sauberen Druckpunkt, der Auslöser hat einen sehr gut definierten ersten Druckpunkt und löst zuverlässig aus.Der 4-Wegestick ist besser als der original Kamerastick...Meine original Akkus und auch die Akkus von Ayex werden einwandfrei und incl. Registrierungscode erkannt und der Ladezustand sauber in % angezeigt.Einzig zum Updaten der Kamerafirmware musste ich den Griff entfernen und den Akku direkt in die Kamera stecken.Bisher ein deutliches Daumen hoch für dieses PreisLeistungsverhältnis!
-klant
Reviewed in Belgium on January 24, 2024
Werkt perfect
Jean-Claude Grouard
Reviewed in France on January 20, 2024
Pour le montage, il faut déclipser la trappe de la batterie. Cette petite porte se range ensuite sur ce grip.Il faut retirer 2 capuchons sur ce grip pour qu'il rentre parfaitement à l'emplacement de la batterie originelle.Il faut ensuite serrer ce grip sur le boitier. On peut mettre 2 batteries dans le grip et sécuriser la fermeture du compartiment. Curieusement, il n'y a plus de voyant sur le boitier quand on le met en route mais le déclenchement fonctionne parfaitement.En position verticale, on retrouve les boutons et le joystick. On peut toutefois désactiver les boutons de la position verticale pour éviter des déclenchements inopinés.Testé avec un RF 200-800 qui est lourd, l'équilibre est amélioré.
Recommended Products
$61.99
$ 29 .99 $29.99