Your cart is empty.
Your cart is empty.Product Description
Entry Level EMF Meter Features
- Easy to Operate, simply power on the unit, select mode of operation, “E” for Electric field or ”M” for Magnetic field and then scan area of concern
- LCD digital display will indicate the sum total field strength of all sources within its frequency range
- Audible tone similar to that of a Geiger counter indicates level of exposure
- Convenient conversion table on back of meter converting nT to mG
Frequency Range
- Measures AC electric fields and AC magnetic fields (16 Hertz to 2000 Hertz)
- Excellent Sensitivity - able to accurately identify Electric fields down to 1 V/m and Magnetic fields to 1 nT or 0.01mG
- AC Electric Field: Value displayed in Volts per meter V/m
- AC Magnetic Fields: Value displayed in nanoTesla nT. Note:100nT = 1 mG (conversion table on back of meter for convenience)
Accuracy
- Readings are 98% accurate within the 16 Hertz to 2000 Hertz frequency range. Sources in this range include all standard household appliances, electronic devices, electrical wiring and wiring errors, high voltage power lines, power transformers
- Single Axis Measurement: Beneficial for source detection
Additional Features
- Auto Power Off: Saves on battery use – will auto-power off after 40 min of continuous EMF testing
- Audible Tone: Audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
- LCD Display: Easy to read 3.5 digit display
- Power Supply: 9 Volt alkaline battery included
- Battery Low Indicator: Meter will auto-power off 3 minutes following battery low signal display
- Operating Time: Alkaline disposable provides 24 - 36 hrs of continuous EMF testing
Includes
- ME3030B EMF Meter
- Users' Guide
- Grounding Cable – 17 foot - for AC electric field measurements
- 9V Alkaline Battery
Customer
Reviewed in the United States on June 23, 2024
Purchased this meter a month ago and already has stopped working. Very disappointing.
GT
Reviewed in Italy on February 4, 2020
Avevo già acquistato un Cornet ED88T+ per misurare i campi elettromagnetici in bassa frequenza, ma non sono rimasta soddisfatta perché avevo l'impressione che le letture fornite fossero inferiori a quelle real. Ho provato in seguito anche un altro strumento, EMF Solutions PF5, che, sebbene più preciso, ha però una soglia minima di rilevamento troppo alta (parte da 5 V/m per il campo elettrico).Dopo questi due tentativi insoddisfacenti, ho fatto ulteriori ricerche ed ho trovato questo strumento, prodotto da un marchio molto noto per gli strumenti di precisione. Ho voluto provarlo e ne sono molto soddisfatta.Lo strumento rileva un campo elettrico in bassa frequenza a partire da 1 V/m, una soglia notevolmente più bassa dei prodotti precedenti. La gamma di frequenze rilevate per il campo elettrico è di 16 Hz - 2 KHz, abbastanza ampia dunque. Anche per l'induzione magnetica la sensibilità dello strumento è ottima, poiché parte da 1 nT, una soglia molto bassa.Lo strumento è inoltre provvisto di un'utilissima funzione audio "Contatore Geiger", che permette di sentire le frequenze misurate e la loro intensità. Questo permette due cose: 1) effettuare rilievi in un ambiente senza dover per forza fissare il display in continuazione, 2) far sentire il campo misurato alle persone che non hanno le competenze necessarie a valutare il rischio in base ai numeri.I rilievi si possono effettuare sia in modalità "grounded" (con messa a terra dello strumento tramite il cavetto fornito in dotazione, da collegare ad un elemento metallico non verniciato) sia in modalità "potential free" (senza messa a terra).Il manuale è completo e tradotto bene, il che non accade spesso.In sintesi: uno strumento davvero ottimo, a prezzo abbordabile, affidabile ed assolutamente necessario per chi abbia problemi di elettrosensibilità o voglia semplicemente accertarsi dei livelli di campo elettromagnetico presenti nel proprio ambiente.Consiglio assolutamente l'acquisto. Il venditore è molto preciso e la spedizione dalla Germania è stata rapidissima.
nae
Reviewed in Germany on October 25, 2018
Das Gigahertz Solutions ME 3030B ist ein gutes Gerät mit Werkskalibrierung und gut geeignet für den Heimbereich aber auch für prof. Anwendung. Es ist einfach in der Bedienung und verzichtet auf große Extras. Die mitgelieferte kleine Handtabelle gibt schnell Auskunft über Grenzwerte und kann so dem Kunden unmittelbar vor Augen führen wo NF Belastungen vorliegen und wo nicht. Für naturheilkundliche oder baubiologische Beratungen wie in meiner Praxis gut zu gebrauchen. Schön auch der zu- oder abschaltbare "Geigerzähler" Effekt über den eingebauten Lautsprecher. Das Zubehör (Erdkabel mit Klemme, deutsche Handanweisung) ist ebenso einfach gehalten und schnell in der Anwendung. Für den Preis vollkommen in Ordnung und m. E. muss mehr auch nicht sein.
André56
Reviewed in France on May 16, 2017
Simple et facile à utiliser pour mettre en évidence la présence trop importante des champs électriques dans nos habitations et d'y remédier par des actions simples (mise à la terre de certains équipements, éloignement des appareils produisant un champ électrique excessif, limitation en nombre et longueur des rallonges électriques, vérification de la coupure de la phase des équipements alimentés par des interrupteurs simples, etc ..).A considérer plus comme un appareil d'aide pour évaluer et réduire les champs électriques que comme un appareil de mesure de précision qui est l'apanage de matériels beaucoup plus chers.
Melissa Tonini
Reviewed in the United States on November 28, 2016
Efficient
Masca
Reviewed in Spain on January 2, 2016
Medidor de campo electromagnético y eléctrico de iniciación, cumple su objetivo, lo he comparado con otro medidor y da buenos resultados, mide hasta 2.000 nano teslas y por encima de esa lectura solo mostrara un 1 en la pantalla, igual cuando se lee campo eléctrico, solo falta la iluminación de la pantalla para que fuera perfecto, en oscuridad tendremos que ayudarnos para poder leer la pantalla.
Rej
Reviewed in Canada on August 3, 2015
Very satisfy !! great product !!
Steve
Reviewed in the United States on March 23, 2014
The grounding wire does not seat properly in the meter and pops out at the slightest movement. I contacted General Elecromagnatics this was their response;"Please ignore my previous email as it doesn't make sense in this case. But to answer your question, all of the units have jacks that are easily pulled out. It's just how the units are manufactured so no, it does not need to be replaced as long as it is still functioning as it should.I hope that helped answer your question!Sincerely,AmandaGeneral Electromagnetics"General Electromagnatics return policy requires you to pay the shipping and insurance and possibly a %20 restocking fee.I contacted Gigahertz Solutions in Germany and this was their response;Steve,sorry I did not want to disappoint you! Perhaps I misunderstood your emailand I must admit that only now I read through all the document that you sentme . On first sight your email sounded like you considered this a minor bugand were looking for something like what I told you. If there were an easyway out, like a little piece of plastic sticking over the metal, then thiswould have been the quickest and most convenient solution...I hope for your understanding that considering shipment cost from here it isa bit overdone to manage this from Germany. As we did not even know GeneralElectromagnetics before you mentioned it as they do not buy from us directlywe have no influence on them.Good Luck!Niels-----Ursprüngliche Nachricht-----Von: steve stapel [mailto:sstapel@comcast.net]Gesendet: Dienstag, 11. März 2014 14:04An: GIGAHERTZ SOLUTIONS | InfoBetreff: Re: AW: AW: EN-Kontaktformular-Anfrage von steve
Recommended Products
$189.00
$ 84 .99 $84.99