Your cart is empty.
Your cart is empty.Product Description
IMPORTANT NOTICE
Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.
From the Manufacturer
NOVA 6014 75mm (3-Inch ) Bowl Chuck Accessory Jaw Set is an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. Universally fits to any NOVA Chuck for maximum flexibility, saving money as duplicate accessories are not needed for different NOVA Chucks. The NOVA 6014 75mm (3-Inch ) Bowl Chuck Accessory Jaw Set has dovetail walls that are 3x the thickness of conventional jaw types for rugged work holding for larger/heavier bowl work. The screws go right through the wall section to add more securing force where its needed most. It has tremendous holding power for large bowls and also moderate hollow forms. The deep, smooth dovetail holds wood gently but very firmly. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both the contraction and the expansion modes. Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability and long life. Comes with 4 jaw segments and instructions. Uses the standard fasteners that come with your NOVA Chuck. Designed by the innovators of the 4 Jaw Chuck for wood turning, Teknatool International - since 1955. Backed by a full replacement 2-year warranty. Some accessories such as larger jaws are only suitable for use on the larger NOVA Chucks, please check manual prior to use.
DSL
Reviewed in the United States on December 11, 2024
Works great. Fits perfectExcellent quality from nova.That's all i buy
Edwin Helvig
Reviewed in the United States on June 12, 2023
I have two nova chucks these allow me to work on smaller parts, larger than a pin in smaller than the 4 inch, they fit perfectly and work, just as you would expect from nova.
B Moore
Reviewed in the United States on March 7, 2023
These are really nice jaws, but not for me. I didn't check the specs good enough. I primarily use tenons (spigots) for holding. My 50 mm jaws are a bit small for some projects and my 100 mm are too big so thought this would work. You can make deeper tenons but not really much bigger than with the 50's. These do work for larger recesses than the 50. These are super heavy duty but not what I needed. Looks like the Powergrip PJSN is what I'm looking for. From Nova's website you can download a jaw manual that has the specs for all of their jaws. Should have done that first, oh well. 5 stars for quality and build but taking off 1 point since specs are not clearly indicated at time of purchase.
Donald Davis
Reviewed in the United States on October 30, 2023
This is a sturdy multi use jaws for a number of applications. These also fit Record chucks that Iām using this with, as well as Nova.
R. Scott
Reviewed in the United States on February 16, 2022
These chuck jaws have dovetail inside and out as well. Deep inside capacity allows for deeper tenons than other jaws. The thickness of the jaws makes for a very secure grab on work pieces. They fit my G3 chuck perfectly as do the other Nova jaws I own.
Kat Adams
Reviewed in the United States on April 18, 2022
These jaws are very sturdy and stable. I use this to turn a lot of my hollow vases and bowls.
charles kaleta
Reviewed in the United States on April 6, 2021
Exactly as described for the No e chuck system. Very beefy feel excellent grip intermediate size. Good to have something above the original 50mm.
Les Barrett
Reviewed in the United States on August 8, 2013
Like all NOVA chucks, this one is of top quality and dependability. Recently, I found that the blank I was turning offered only a limited accommodation for the jaws I had. Although I have many jaws, I decided that this one was the only realistic option. When you find/buy a nice chunk of wood, bring it home, cut it to your size with a chainsaw, carefully dry it for the appropriate time (weeks, months, or years), turn it into a blank on the bandsaw, and mount it to your lathe, you have invested a fair amount of effort, thought, and gold. Of course, if you skip all that and pay a huge amount for a prepared blank, this will not make much sense. Either way, there is an investment of time, and eventually, something more personal. As you turn it, you find out what the wood will allow. The 100mm jaws you planned to use will not work. The 50mm jaws are too small. That is your dilemma. Will you now say that the pittance you must give up for this quality product is not worth the many years of value it will bring? Frankly, for one really good piece of wood, this chuck is worth the price. Don't change your project to fit the chucks that you have. Buy the jaws that you need now.
Recommended Products
