Your cart is empty.
Your cart is empty.The Nu-Calgon 4297-76 Pipe-Dri Cold Pipe Insulation Spray is an aerosol insulation which provides a moisture barrier to stop sweating and dripping on refrigeration lines, air conditioning lines, and other cold surfaces. Quickly adheres and dries to a hard water proof coating. Pipe-Dri’s spray pattern permits spraying of odd shaped fittings and makes it possible to insulate hard to reach areas. This product is ideal for providing a moisture barrier for refrigeration and air conditioning lines, and cold water pipes, etc. Sweating and dripping are eliminated by this durable, waterproof protective barrier. It separates the warm moist air and the cold surface, preventing condensation from occurring. Pipe-Dri offers the ability to apply on odd shaped fittings and hard to reach areas. Reapplication will continue to build thickness as required. One can will normally cover approximately ten feet of one inch water pipe or eight square feet of flat surface area with two coats. Ideally, the product should be at room temperature (70-75°F) and the surface to be coated at a lower temperature. A thick application is hard to form on warmer surfaces (above 80°F); however, a thicker coat may be achieved by applying 2 or more light coats. Once a coating has been allowed to dry and harden, it will be stable at temperatures up to 120°F. Do not use on plastics or painted surfaces. THE NU-CALGON 4297-76 PIPE-DRI COLD PIPE INSULATION SPRAY IS FOR PROFESSIONAL USE AND SHOULD ONLY BE USED IN ACCORDANCE WITH ALL REGULATIONS AND PROPER SERVICE PRACTICES. PLEASE SEE PRODUCT LABEL OR CONTACT NU-CALGON DIRECTLY FOR USE INSTRUCTION. IT IS RECOMMENDED TO UTILIZE THE APPROPRIETE PPE (PERSONAL PROTECTIVE EQUIPMENT) DURING APPLICATION.