Your cart is empty.
Your cart is empty. Skill for Use:
Easy to Remove Models: High-quality spring steel material, after the printing is completed, you only need to take off the spring steel after cooling down and gently bend it to remove the model, without using a shovel, which is more convenient and prolongs the service life of the printing platform
Easy to Clean: It is recommended to use a non-woven cloth dipped in alcohol to wipe the printing platform. After wiping and cleaning, wipe off the surface moisture as soon as possible to avoid prolonged contact with strong irritating chemicals such as alcohol on the printing surface
Package Include:
1x PEO+PET double size build plate
Jessie
Reviewed in the United States on May 9, 2025
Got this for an Ender 3. Lovely plate that leaves great designs and patterns on the base of parts. Adhesion is fine with PLA but can run into a bit of issue if you don't have the first layer tuned right. Like other plates I've used with similar patterns, PETG and materials like that don't stick well so if you really want to try, you'll need some glue stick to help it stick.Great for a lot of aesthetic prints and things you want to add a bit of flair.
Jul
Reviewed in the United States on May 29, 2025
The designs are pretty, but those attractive elements scratch easily. The surfaces are a little too oddly textured so material doesn't stick to it very well, so it makes the flexibility a little less useful. And the texture it puts on the surface is not ideal for most prints. But it's alright.
ICantBeBothered
Reviewed in the United States on May 2, 2025
I got this knowing full well it wasn’t exactly compatible with my printer. It’s designed for a different version of the Ender 3, without the screws on the rear of the build plate. I intended to cut out those sections so it would fit, but it really fits fine, it just isn’t guidable like it would be if it had grooves.The build plate looks great and it feels like great quality. The pictures I have don’t show off the texture super well because of their small size, it shows how well the adhesion works with small prints. I’ve got no issues with this build plate, I only wish there were more than two sides (on a single plate) so I had more options for printing. Great quality!
Mj Sch
Reviewed in the United States on May 19, 2025
Soooo many adhesion issues. Without glue I cannot get PLA to stick but the PLA makes the prints come out with a streaky texture. No instructions come with it. Using an Adventurer 5m pro. Cleaned plate with soap and then tried rubbing alcohol. Have tried making nozzle and bed hotter and nothing works
Neuronscream
Reviewed in the United States on May 15, 2025
This works great with PLA and PETG. PLA will adhere just fine without any hair spray or stick glue. If you're going to do PETG, you MUST add some spray or glue otherwise you'll watch a nice blob form on the nozzle because it will not stick at all.I really love how my first layer looks with this plate. As another note, there are several handle models out there that I have tried out. Frankly they are not needed and in most cases they interfere with the print head, so just let the plate cool down and bit before you reach in and grab it.
DJ E.Rich
Reviewed in the United States on May 13, 2025
These novelty plates offer a unique finish to your 3D prints. The smooth finish has been more than adequate when it comes to bed adhesion and I haven’t had to use any glue. It’s not the plate I use for every day use but it is the plate I’ll use to add a little style to a print.
Wombat37
Reviewed in the United States on May 1, 2025
I’ve been using polymer-coated sprung steel printer build plates for some time. I think they generally do a great job. However, they don’t last forever, and I find that the polymer coating can wear down, flake, or start to peel off after extensive use, so I need to get a replacement when this happens - usually after several months.This build plate from Hikudiy was just the right size for my Ender 3 Pro printer. I ordered the H1H version because it looked like the surface was smooth and glossy with no texture or pattern as seen on some of the other build plates I’ve used. The product was shipped well packaged in a stout cardboard box inside a bubble-wrap type envelope. No magnetic layer was included with this product, but I have several of these already and was pleased that I didn’t have to pay for another one. Both sides of the plate were well protected with a peel-off plastic membrane. Both surfaces were, as I had hoped, smooth and glossy. I sometimes need to print an item that has an absolutely smooth surface to get a pneumatic seal against another surface using rubber or silicone o-rings.I use PETG as my go-to filament, so I used this as my first trial of this new build plate. I quickly found that there was no adhesion at all between the plate set to 75°C and this filament applied at 240°C, and I ended up with a minor rat’s nest. I washed the plate with soapy water and isopropyl alcohol, and now the adhesion was much better – I should have done this first. However, the corners of the print soon started to curl up, and eventually the part fell off the plate before finishing, so still further adhesion was needed. I put a thin coating of PVP glue stick onto the surface, used a brim to hold the part better onto the plate, and put the printer into an enclosure to stop temperature fluctuations. I have had to use the same measures with other build plates I’ve used. This third attempt to print with PETG was successful. Once cooled, the part popped off the build plate as it was slightly flexed. It took some tweaking, but I finally got a nice-looking PETG print with a smooth, shiny, flat bottom surface.
UFOWorks
Reviewed in the United States on April 28, 2025
Picked this up to have an extra fun build plate for my FlashForge Adventurer 5M. The plate came well packaged and well protected. I needed to re-level the machine since this plate is about 30% thicker than the original one that came with the 5M. I started with the smooth diamond first and it printed with no issues. I wiped it down with isopropyl alcohol and the print stuck to the plate good and the result turned out looking pretty cool. I had some problems trying to print on the galaxy side of the plate. Again, I wiped it down with isopropyl alcohol each time but the print failed to stick 3 times using different settings. I used a glue stick on attempt #4 and got it to finally stick but unfortunately the glue made the galaxy pattern look bad. I clean the plate again and did some more tweaks in the settings and finally got it to stick on attempt #5. Overall this plate works well but you will need to play with different settings to get it your print to stick. Once you can get your setting correct this plate is something I would recommend to anyone looking for a fun new plate for their FlashForge Adventurer 5M
Recommended Products
