Your cart is empty.
Your cart is empty.Product Description
Put
Put tumblers into the machine
Operate
Press the button, the machine runs for 60 mins
Cool
Let it cool for 30 to 60 mins before taking it out
Enjoy
Tumblers have been fully cured
Yelitza Vergel Gonzalez
Reviewed in the United States on May 8, 2025
Ufff la mejor 🤗
Customer
Reviewed in the United States on February 23, 2025
It does cure as it says, but it depends on how thick you put on the epoxy. It has to be thin layers, if the epoxy is thicker, it won't dry evenly and there will be ripples because of the heat setting the epoxy faster. If you use stickers on a cup and then epoxy over them, the epoxy makes dimples and dips, due to the heat on the stickers. I think that is great for first coating of epoxy on tumblers if you are in a hurry to complete the cup. This way you can get the coats on faster. I don't know if I would recommend it for final coatings.I like the fact that it does cover the cups so that there isn't any dust or other particles landing on the cup as it is drying. It's light weight and easy to put together, it is well worth the money. The design is amazing, but it would be nice to have a timer. As far as the stoppers for the feet to be put on the bottom I just used E-6000 adhesive.
isldgrl2008
Reviewed in the United States on April 21, 2025
It has warm heat blowing and lighting and really dries hard in a couple hours.
Génesis Girón
Reviewed in the United States on April 21, 2025
Amo esta máquina de secado excelente. Gano mucho tiempo con ella.
Brenda Kuffler
Reviewed in Canada on July 4, 2024
Well I’m using stone coat art resign on wine glasses and it heats up the resign that it just runs and ruins my patterns wasn’t even starting to dry after 1 hr
Sarah Patterson
Reviewed in the United States on December 19, 2024
Overall I am happy with my box. There are a couple things I do wish were different. I wish there was a timer on the box so if you forget to look at the clock, you would know where it was in the curing process. I also wish it was a bit larger. When doing 40 oz cup there is only about half an inch on the top and bottom of the cup before the front and back of the box. The first time my cup touched the back which messed up my resin. I’ve been very careful to move it slowly to avoid that. And extra inch would be very helpful. The height also needs to be taller. I wanted to epoxy the handle on the cup. But it hits the bottom of the box. With the length of my spinner, I have to slide the box over the spinner bottom so I can’t raise my spinner to give me more space on the bottom. My spinner is standard size.There are silicon feet provided to raise the box up, but there are no pre drilled holes so I feel that wouldn’t be very sturdy if you did need to raise your box.It takes me two rounds to be able to set my cups. This might be due to the temp here or humidity.Overall I like the box, but do think there is room to improve it.
Sheryl Morgan
Reviewed in the United States on September 3, 2023
CONS:1. No written instructions...only pictures2. Included 4 pieces not mentioned..look like "feet" or maybe spacers? See photo #2.3. The back acrylic pane has a spider web cracking near the top. I need to know if the cracking will worsen with use and can you send a replacement panel?4. The silicone mat is much too large for the floor if the enclosure.PROS: This product was relatively easy to assemble.I have not used the products I cannot comment on its use.I will ammend my review after hereing back from their customer service dept.UPDATED REVIEWGreat customer service. I was given the opportunity to either return product or receive a $20 credit and I accepted the credit.I have used the product almost daily and it works great. I live in the Midwest and Temps are getting cooler and the humidity can be brutal, but with the aid of this machine those problems are solved. I can completely finish my tumblers in about 4 to six Ours depending on the number of epoxy coats that I need to apply. I will be purchasing another unit in the near future. My only issue is that there is no on/off switch. The unit must be unplugged to turn it off. The heating unit stops after one hour, but the unit is still on. It needs to have a switch or shut down completely. The unit is very quiet. Oh, and the clear pegs are indeed intended to elevate the unit, if needed. There is no place to attach them, so I just used the flatpcs of stryofoam that were used in the packaging.UPDATE 9/16/23I have used the unit practically every day since receiving the unit. I am not sure if I will be keeping it. The fact that it does not have a main off/on switch has become a real issue. I also don't like that it only runs with heat for 1 hr is also an issue, as everything I have made requires a 2-hour dry time. I have to manually unplug the unit . Also, the little magnetic door is a real pain to get into place. I will be returning the unit. Even though you have an awesome customer service dept.
dizzylizzy
Reviewed in the United Kingdom on September 18, 2023
I looked forward to receiving this to help with my resin artwork. I was disappointed because it needs a transformer to work here in the UK, but there's no mention of this in any of the item description on the web, and no mention of this in the enclosed instructions. This purchase was expensive, and the added expense of purchasing a transformer made it unsuitable for me. I returned it. The refund was quick and easy.
JC
Reviewed in the United States on November 15, 2023
Update: Company said to get my product replacement/issues handled from their contacts through Amazon but it directs me right back to the direct company website. I am returning this, and it still runs 1 min 30 seconds, not for an hour. I wish I had a better product review to share! Hopefully my refund experience is much better lol (and I was sooo excited to get this..... I am super bummed and disappointed to write this review update for a broken new machine that doesn't run) :(Disappointed! Only runs for 1 minute & 30 seconds at a time (timed this each time) and doesn't stay running! According to the description it is supposed to run for an hour.... I have reached out to the company and will update a review if something changes, but for now - I wish I could give this ZERO stars! Setup was easy, and if it did run I am sure this would be great- but this is doing nothing for me and trying my tumblers :(
Recommended Products