Your cart is empty.
Your cart is empty.Product Description
Convert Your NVMe M.2 SSD to USB 3.1 as an external drive
RIITOP NVMe to USB Adapter is ideal for those who own multiple NVMe M.2 SSDs that need to be frequently plug and unplug.
No mounting screws need, simply insert the NVMe M.2 device and connect the USB cable, and you can start using immediately.
The SSD docking base is a USB 3.1 Type-C adapter that allows users to insert NVMe M.2 devices vertically. Please insert carefully to avoid damaging the connector of SSD Designed Exclusively for NVMe M.2 SSD Supports the non-volatile memory express (NVMe) SSD,
The connector standard adopts NVMe M.2 SSD
Compatible with M.2 NVMe SSD ONLY:
Samsung SM951- NVMe, PM951-NVMe, 950 Pro NVMe SSD, SM961, PM961, 960 EVO, 960 Pro, 970 EVO, 970 Pro. INTEL 600P. Liteon T10. And other PCIE M.2 NVMe SSD.
NOT Support PCI-e Based M Key AHCI SSD, or any B/B+M Key SATA Based SSD.
Please Note:
1. The temperature of the entire operating SSD may exceed 60 ° C. Please do not touch the SSD during operation.
2. It can NOT support "Hot-Plugging". Please don't exchange the SSDs when connecting. USB 3.1 (Gen 2) Type-C Interface The docking Station adopts USB 3.1 (Gen2), Type-C interface which supports high-speed transfer rates of up to 10 Gbps.
Chipset: JMS583
USB 3.1 Gen 2 to PCIe Gen3 x2 Bridge Controller
The JMS583 is a USB 3.1 Gen 2 to PCIe Gen3 x 2 bridge controller between USB host and PCIe storage device.
The USB 3.1 Gen 2 interface offers data transfer speed up to 10Gbps, doubling the USB 3.1 Gen 1 data rate.
Meanwhile, the downstream port of the JMS583 is compatible with storage device with PCIe interface, such as SSD.
The PCIe port is compliant with PCIe Gen3 x 2 specifications.
Support Windows XP / 7 / 8 / 10 and Mac OS. No driver required.
Installation Steps
1. Insert NVMe SSD into Slot 2. Connect USB Cable to Dock 3. Connect USB Cable to Computer
Please note: it can NOT be identified if insert SSD after USB Cable connected to Computer.
Package Including
1x M2 NVMe to USB Dock
1x USB C to USB C Cable
1x USB C to A Adapter
Greg
Reviewed in the United States on March 24, 2024
Got this to work with my Apple Mac Studio with M1… I had to plug it into the port on the back of the computer as it was not recognized when I tried plugging it into a USB hub.
Bing Yiu
Reviewed in the United States on December 29, 2024
Not sure how much a longer USB cable cost to made, but why every brand just include a tiny cable.It will get the job done, package is basic, don't even include an instruction manual, they put a sticker on the outside of the box... really save every dime on cost, pay attention to the instruction otherwise it won't read; but NVMe will get hot, so be carefulThe only small potential issue is the vertical slot, be careful don't bent your drive make sure insert it with correct angle
bbbzeliard
Reviewed in the United States on September 14, 2023
Had to get one of these to perform a backup on a laptop. Worked perfectly!
S. Moon
Reviewed in the United States on May 20, 2023
Still confused about M.2 drives. I had something like this but apparently is is for the SATA variant but new computers have a NVMe standard. I just know my two computers can use both but I need two readers for both standards. So I have both now.This is really well made, nice and weighty. it gets warm but I'm sure it would get hot had it not been made from aluminum. The speeds are fast, didn't measure it but they are faster than my 2.5 inch SSDs.
None
Reviewed in the United States on July 8, 2022
It works, but it is so slow it is ridiculous. I am getting oly a few MB/s when doing an NVMe to NVMe disk copy, no matter the utility I am using. When connected to a Windows 10 system either via usb c or usb3 to usb c connection I don't get more than 20 MB/s. I get much faster speeds on just external sata drives. It's just horrible.It gets even worse. On top of all of that, it reads maybe every third drive I have tried it with. Really a totally useless docking station that has put me in a bind multiple times. The Riitop support is non existent, there are no firmware updates and their FAQ is just flat out full of c@#$. Avoid everything from them unless you feel like gambling every time you plug it in and waiting all night long.
Kevin Broadstock
Reviewed in Australia on November 16, 2022
Works very well
Customer
Reviewed in the United States on August 6, 2021
The device works great. The only issue I had was the hard drive would sporadically overheat and fail to image. Mostly due to my office work environment. A small counter turbo fan fixed that issue and I have not had a hard drive imaging failure since the fan was added. Fully recommend this product.
Sergio
Reviewed in the United States on September 19, 2020
Great way to access data on NVME drives. Easy to use and no issues with windows 10. Only thing that could be better is the force required to insert and remove the drive. Some sort of lockeject button would be nice.
Elpidio Ramos
Reviewed in Mexico on October 29, 2020
Se conecta sin mucha presion. Se debe mantener en un lugar sin movimiento pues puede salir de la unidad el chip (ssd).
Derek
Reviewed in the United States on October 22, 2020
This is a fantastic dock. Small, lightweight, looks great and super easy to use. No external casing and no screws required like most other M.2 SSD docks I’ve used. I love that this USB-C dock comes with a USB-A adapter. Best SSD dock ever! I only wish this also worked with the M key and B+M key M.2 SSDs.
Recommended Products