Your cart is empty.
Your cart is empty.Toyota / Lexus 30mm Front Axle Lock Nut Remover KitThis unique tool combines a 30 mm, 12 point special depth 1/2 inch drive impact socket with a axle nut lock ring release tool to unlock the 30 mm axle nut found on many Toyota & Lexus vehicles. This release tool has a patent pending unique angle that allows the technician to easily unlock the 30 mm axle nut. Failing to unlock the detent portion of the axle nut prior to removing the nut often results in damaging the axle beyond repair. Made from heat treated steel, these two tools makes this job a snap. Applies to: Toyota Avalon 2002 and later, Camry 2002 and later, Corolla 2003 and later, Prius 2001 and later, Sienna 2002 and later, Solara 2004 and later, Lexus ES300 2002-2003, ES330 2004 and later, LS400 1990-2000, RX330 2004 and later. Lock nut release tool effectively unlocks axle nut eliminating thread damage.
JC in NC
Reviewed in the United States on January 22, 2024
This thing works as advertised. The pick de-stakes your axle nut with ease and having a nice 12pt 30mm deep socket is a welcome addition to my socket collection. Having the right tool for the job makes it so much easier!
diy enthusiast
Reviewed in the United States on October 16, 2020
Great tool for Toyota/Lexus cars. Chisel works great and fits Toyota/Lexus axels perfectly. The socket is impact rated and seems made to last. I wish it came in a small storage case and not in 2 thin pieces of plastic.
Vladimir S.
Reviewed in the United States on June 14, 2019
Axle nut locking via bending is one of the stupidest Toyota designs. But let's face it: there's nothing we can do. So, at some point you will have to buy this or similar tool. First I tried to unlock a nut with a chisel from a big set of chisels bought in a local hardware store. It did not work. I nearly damaged the nut. Then I bought this tool and it worked perfectly. Yep, it's expensive, but it's a necessity. And if you think that you can find something like this in you local parts store, you are very mistaken. Sellers in my area have never heard about it.
DanD VA
Reviewed in the United States on February 7, 2019
I save so much money doing my own auto repairs that I don't feel bad about spending a little on good tools. This socket is well-made, fits precisely, and appears heavy-duty enough for even a full-time Toyota mechanic. It might be overkill for a punter like me working his Prius, but that's OK. It's a joy to use a quality tool. The special tool for un-staking axle nuts is surprisingly handy. In the past I have just used a small pointed punch, but that can be a little fiddly. This one makes the job easy and foolproof. Just insert it in the gap, whack with a small sledge a few times and you're ready to spin the nut off without damaging the axle threads.
erik
Reviewed in the United States on November 15, 2018
It is always better to have the correct tool for the job and this does just that. It works just as intended and makes the axle but removal process a simple task . This toolKit is high quality and of great value.
David L. Hinojosa
Reviewed in the United States on August 1, 2017
Completely amazing result. Seems to be a worthless rod straight out of the packaging, but I assure you that THIS tool made my wheel hub bearing swap out so effortless!! Worth the investment! Please make sure to order a new axle nut before removing the old one. It will be useless once you tap it out! Buy THIS part!
Gerard F
Reviewed in the United States on September 6, 2016
Mine arrived without the chisel, so I never got a chance to try it. Since this tool is over $40, and the socket is available locally for about $17, I'm returning this incomplete tool, and will try the job a different way. The manufacturer of the tool needs to staple all three open sides of the blister pack to keep the chisel from falling out. This 30mm socket fits ONLY the factory installed 12-point nuts. Guess what? The new 6 point nut that comes with the axle is bigger...I used a 1-1/4 to tighten the new nuts. Sooo...if you're using new 6-point nuts, this becomes an expensive one-time tool. To get past the missing chisel, I purchased two square shaft keys at the local hardware store for 80 cents each, then sanded the top into a chisel point. The home-made tool bent after a few strikes, but got the job done.
RogueHippo_Reviews
Reviewed in the United States on April 11, 2016
I'm regular guy that enjoys attacking car repairs when the need pops up and when my '07 Camry needed a wheel bearing replaced I had to get past the axle lock nut.I couldn't find the nut remover locally so I jumped on Amazon and thought I found a good one when I purchased this one from Schley Products, Inc. When I purchased it, it was around $40. It was more than I wanted to spend but when the package came and I saw the quality and weight of the product I at least knew I got a five star kit.The fit was prefect on the nut and locking/unlocking tool was a huge help and worked like a charm!
Recommended Products
$46.88
$ 21 .99 $21.99