Your cart is empty.
Your cart is empty.Lumantek SDI to HDMI Converter with Display and Scaler
Customer
Reviewed in the United States on September 2, 2024
I saw that it takes 5-18v DC so I purchased a USB 5 volt battery and a USB to power cable. I then used velcro to attach the battery to the monitor. It fits in my pocket and I use it to evaluate my HD-SDI signals when setting up behind the rim cameras for basketball. Since it has a loop through, I can even send the signal to the truck and view it locally at the same time. I just wished it would also provide a test signal. Then it would be perfect.
TStech
Reviewed in the United States on March 13, 2024
Usually a fan of Decimators but decided to be a tad more thrifty and try one of these converters. Reviews were good, so I took a chance. Pleased to say, for the situation we needed it for, it works great. We needed to send the SDI feed from a BlackMagic switcher into a hotel ballrooms HDMI wall plate connection at 59.94, and it worked like a charm, freeing up Decimators to other tasks. Love the information presented on the display including an audio meter to check levels.
Greg M.
Reviewed in the United States on November 4, 2024
Sweet box. But I can't get it to recognize 1080p59.94 B or 1080p60B. Just shows the frequency and displays a grey scale pattern. Only displays B.
Oak Lea
Reviewed in the United States on October 19, 2024
I work in broadcast television and a friend suggested this monitor to me.As a small test monitor it is awesome. It very small which makes it very handy to carry around and test equipment. The picture is very sharp and while it small, it lets you confirm that you do have a signal.I have t powered with a small12V power cell intended to recharge a cell phone.It does have a converter built in that lets you convert from HD-SDI to HDMI which would be helpful to test those monitors as well.I could not be happier with it.
Over worked
Reviewed in the United States on December 7, 2023
Can't imagine working as a VC without thus handy little tool. And so inexpensive!I added a small battery to the bottom and bent the mounts to hold it. Battery lasts 6 or 7 shows
Ron Gin
Reviewed in the United States on April 12, 2023
I was trying to run two 100' SDI cables through my Blackmagic ATEM mini pro - with BM HDMI-SDI to SDI-HDMI converters to two older projectors for an auditorium presentation. The BM high res signals were not compatible with the older projectors. The solution was to run one 100' SDI cable from the ATEM Mini Pro to the Lumantek Scaler and then split the HDMI out to the two projectors. Works! The BEST part of the Lumantek is that you can see the image of what will go out. There are lots of different settings available from the Lumantek, but it was a plug and play for me. No changing the dip switches. I could have saved a bunch of time and $$$ if I had started with the scaler.
anonymous1
Reviewed in the United States on September 24, 2022
Very easy to use! Works great! Do NOT buy those cheap Chinese $30 Black Magic knockoffs.
Brent P.
Reviewed in the United States on September 18, 2022
These are very handy. Wished I had bought one sooner
Recommended Products
