Shopping Cart

Your cart is empty.

Your cart is empty.

SFP to SFP Fiber Media Converter - 2 x Standard Open SFP Slots - Supports Gigabit, Fast Ethernet and 2.5G SFP miniGBIC modules - Fiber to Fiber Converter - Without Transceivers

Free shipping on orders over $29.99

$59.85

$ 31 .99 $31.99

In Stock

About this item

  • USE IT as a Single to Multimode Media Converter - 2 x Standard Open SFP slots for any type of SFP (miniGbic) modules
  • USE IT as a Single Mode Dual Fiber to Single Mode Single Fiber Converter - thus, Saving The Fibers!
  • USE IT for Converting Wavelength when Interconnecting Network Devices - i.e. 850 nm to 1300/1310 nm, 1310 nm to 1550 nm and so on. Just find the correct and matching SFP's for both slots!
  • SUPPORTS 1.25G (Gigabit Ethernet), 155M (Fast Ethernet) and even 2.5G SFP modules (Important: Use matching speed modules in Slots A and B only - i.e Gigabit + Gigabit only, do not mix).
  • What comes in the set: 1 unit of 2 x SFP Slot Converter (no SFP modules comes in set), AC power supply, User Manual



Product Description

Do you have 2 segments of optical fiber network, that do not match in wavelenght or fiber cable type? Or, simply need to extend the distance?

AN-UM-2-SMC-AS is Designed for All these purposes and even beyond them - Use Any Standard SFP Module You Have In Hand to Plug In A & B SFP slots and You Are Done - It Works!

Changing Distance or Fiber Type? Again, Change SFP module , While Keeping Same Media Converter!

Here are some possible applications for you to consider:

  • Single Mode to Multimode Conversion
  • Single Mode Dual Fiber to Single Mode Single Fiber Conversion
  • Various Wavelength Conversion - 850 nm to 1310 nm, 1310 nm to 1550 nm (FP to DFB) and so on

All These Important Features Are All Supported:

  • Provides 2 open slots for SFP miniGbic modules, all major SFP brands are supported
  • Supporting hot-swap of SFP modules
  • Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-LX/SX (depends on type of SFP module used)
  • Power supply: 100 to 240VAC 50 to 60Hz
  • Dimensions: 70.5mm (L) x 94mm (W) x 26.5mm (H)
  • Environment: Relative humidity; 5% to 90%
  • Operating temperature: 0 to 70 degree Celsius
  • CE, FCC, ROHS, LVD certified
  • Supports Jumbo Ethernet frames up to 9000 bytes

Setup of these units are really easy if you follow 4 steps shown in gallery the above.

Questions during installation? Not sure it will work with your setup? We are always here to answer You and guide You through!

IMPORTANT!: While the unit supports all 3 of the most used tyoes of SFP modules (miniGBIC) - 155M, 1.25G, and 2.5G, use only the same (matching speed modules in Slots A and B at the same time. I.e configuration: Slot A - Gigabit SFP & Slot B Gigabit SFP is OK, but Slot A Fast Ethernet SFP - Slot B Gigabit SFP - will not work!


Walnuts
Reviewed in the United States on August 23, 2024
This worked as expected which is a great option if you have to mix fiber.Thanks
匿名希望
Reviewed in Japan on July 11, 2024
伝送距離の延長で、電気信号を光信号に変換するには十分な機能を持っています。動作も問題なく使うことができました。
モノスキ
Reviewed in Japan on June 25, 2024
最終更新日:2024/06/251.検品パッケージ開封後の内容物は以下の通りでした。〇内容物①(メディアコンバーター)本体②ACアダプター③ゴム足④鉛筆⑤説明書以下、特記事項のある項目について記載します。①(メディアコンバーター)本体本体は金属製でSFP+x2です。尚、端子部のカバーはありませんでした。②ACアダプター入力は100~240Vで出力は5V/1A、PSEマークも菱形がありました。③ゴム足ゴム足(x4)がありました。④鉛筆おまけと思いますが、鉛筆1本がありました。⑤説明書説明書は日本語で作成されていました。2.感想等2-1)使用について※使用には別途モジュールを2個準備する必要があります※又、環境により使用するモジュールは異なります自宅環境で試してみましたが、現状では特に問題なく使用出来ました。(当方の環境の制限でファイバー1Gまでですが、仕様では2.5G対応のSFPがあれば2.5Gでも使えるのは良いと思いました)2-2)その他感想等(不満点)不満点は1点で、端子用カバーが無かった点。説明書にも"使用しない時はカバーをして下さい"とあるのですが、そのカバーが無いのが残念でした。(当方の場合、検証環境で使用しており、良く環境変更をするので外す場合もある為)3.評価ファイバー変換を手軽に出来るのは便利と思いました。しかしながら、不満点(先のキャップが無い点)から☆4としています。後はこのまま使用しての耐久度等で何かあれば追記したいと思います。以上〇更新履歴2024/06/25 初版
JC
Reviewed in the United States on March 4, 2019
Item worked exactly as described. Documentation is minimal. But got the job done.
Well did ya like it? Well did ya?
Reviewed in the United States on September 4, 2018
These converters are working exactly as advertised. They have performed in the stresses of the US South East Summer environments without a hitch thus far.
Aleksandrs Korsunovs
Reviewed in the United States on February 5, 2018
Very fast delivery! Converter works perfectly for converting on type of fiber to another one (Single to Multi-mode). I have tried copper transceivers and surprisingly it works fine as well (ping is less than one millisecond). Packaging is neat. I will definitely continue buying adnet products in future.
Customer
Reviewed in the United States on October 26, 2018
Product worked as described and arrived on time! Simple to use and good price!
russell
Reviewed in the United States on April 16, 2018
Worked as advertised
Recommended Products

$74.50

$ 28 .99 $28.99

4.5
Select Option