Your cart is empty.
Your cart is empty.ES02 is a convenient remote switch kit designed by silverstone to wirelessly turn on / off and reset a computer. By utilizing existing standard 2.4GHz RF wireless technology, USB 2.0 internal 9 pin connector, and power / reset pin headers on a motherboard, the ES02 kit is easy to install and use within 20 meters of a connected computer. An included Y cable ensures your computer case's own power and reset buttons can be used concurrently with the ES02 if needed. Users looking for a simpler security solution than software access control will find ES02 to be a good alternative. Those with computers located in hard to reach area or has special usage scenarios will also find the ES02 to be very handy.
Mr. Fox
Reviewed in the United States on March 28, 2025
While I really expected this to be a decent product, the remote is very flaky. I re-paired it with the receiver twice and it only randomly seems to work. I thought perhaps it was a signal interference problem and removed the tempered glass case side panel and even with a clear line of sight less than 2 feet away, more often than not pushing buttons does not register with the receiver. About 75% of the time nothing occurs. The USB port has power when the system is off and even when the system is turned on most of the time pushing buttons on the remote does nothing. The light on the remote comes on when buttons are pressed, but the receiver does not acknowledge the button presses most of the time. The indicator light on the receiver does not illuminate as it does in the rare circumstance that it receives a signal from the remote. I changed the coin cell battery to rule out the possibility of a weak batter. The brand new battery did not affect anything for better or worse. I do not know which component (remote or receiver) is faulty. I am going to return it and get a refund because it does not function reliably.
Zack Holder
Reviewed in the United States on February 18, 2025
The media could not be loaded.
Mike S.
Reviewed in the United States on March 25, 2024
My computer is shoved under a corner of my desk and the power button is hard to reach. I'm also using an add-on 10gb NIC so WOL won't work for me. I like it where it is though! This thing worked perfectly.
Michael MacDonald
Reviewed in Canada on June 19, 2020
I have servers downstairs, it's a pain to run up and down to restart them. Installed this, works pretty well. It's nice.
MAIKU HAMASAKI
Reviewed in Mexico on May 24, 2020
Muy bonito y sirve muy bien es muy facil de instalar pero deberia ser recargable por que las pilas no duran nada como 3 semanas máximo espero la marca despues haga una version recargable.
Customer
Reviewed in India on February 4, 2020
This product is not compatible with all mother board.Niether there are any troubleshooting tips on manual.Documentation is hopelessThink twice before burning your money
Jefferey Bowman
Reviewed in the United States on April 26, 2020
So, first things first... Ditch the instructions. They're awful and not worth the ink wasted to print them. SilverStone decided to blow up an image of the pin connections and they didn't use a high-res image, so it's all blurry and distorted in the included manual. You can actually Google for a clear picture, use that and not the wasteful kindling they threw in the box. (Extra padding, maybe?)Once you have the correct pins figured out, the installation is a BREEZE. It's a five-minute job if that. (Well, depending on the layout of your PC. If you have to move components/wires, it'll be a bit longer.)1.) Pull off the front panel cable (power/reset) and plug it directly into the board.2.) Plug the y-cable they included onto the pins where the front panel cable was just residing so you can still use the physical case buttons as well as this.3.) Plug the unit into the front panel USB header on the MOBO.4.) Plug the USB wiring onto another header or use the included adapter.And you're done. Before starting, however, make sure your MOBO allows power through USB while off or asleep. Make sure it has the S3 setting before starting. Otherwise, you're good to go after all of the physical labor.Comes with a battery, even! Powers on/off with one press and no waiting or messing around, even the reset button is instantaneous. No lag, and no gray area/middle ground, either. It either works or it doesn't, even less hassle in that department.I'd absolutely recommend this if you have a desktop PC, especially one being used as a HTPC. Sometimes you need to restart but can't find your mouse or keyboard (if it's wireless) this little clicker comes in handy.
Steven & Heather
Reviewed in the United States on August 4, 2019
So this kit comes with the Remote, Wires, the receiver and a adapter so you can face the receiver in 3 different positions. You MUST have a spare/open USB header on your Motherboard or this will NOT work. Also the adapter has 3 spots for you to connect to. This can NOT be used with anything else. I Tried to connect the transmitter to one slot and my USB to the other and it would not work, the transmitter and receiver worked fine but would not allow the USB to function properly. I do wish the receiver used a different method other than a USB header. Many modern Motherboards only have one or two USB headers and they are usually taken. So the receiver must be plugged in on its own. Otherwise its great, The remote works from far away and no issues with things being in the way. For the price its a great product!
Miguel Miyamoto
Reviewed in Mexico on May 6, 2019
Compre la versión que se alimenta directamente de un puerto USB2.0 y regrese la tarjeta pues pareciera que cada cierto tiempo hay que reprogramar el control para sincronizarlo con la tarjeta de expansión.No sé si es por que no tiene un chip de memoria que pueda aprovechar las ventajas de alimentación de la motherboard o quizás requiera de una batería en el PCB, el asunto es que cada 5 arranques hay que abrir el gabinete y rehacer el proceso para sincronizarlo.
peter
Reviewed in Canada on May 1, 2019
Easy setup no hassleWorked immediately
Pewsplosions
Reviewed in the United States on January 10, 2019
Thought I'd add some information for this product. It works really well. Does what it is supposed.Installing is really easy. The female pins on the board need to be plugged into the USB header on the motherboard. It provides a splitter so you can still plug your case in as well. There are multiple angles too so it is easy to fit in most spots.The size is kind of big for my application but it is really just a small board that you put on your motherboard. I took a picture of it next to a ruler to maybe help others see how big it is.One thing I'd like to test eventually but is not all that important to me is if its signal interferes with other wireless devices on the same frequency. I would expect it to work fine but I can't comment for sure since I have no other wireless devices right now.All in all this is a really cool product that I am really surprised isn't more popular.
Recommended Products
