Your cart is empty.
Your cart is empty.Product Description
Andreas Bergen
Reviewed in Germany on May 14, 2025
Der Artikel wurde mir kostenlos im Rahmen des Amazon-Vine-Programms zur Verfügung gestellt, dies hat aber keinen Einfluss auf meine Beurteilung.--------------------------------------Das Tischstativ kommt ordentlich in Pappe verpackt in zwei Teilen- dem unteren Rohr mit (nicht abnehmbarer) Tischklemme- dem oberen Rohr mit Schwenkgelenk, Ausleger und KugelkopfZusätzlich liegen noch eine (eigentlich überflüssige) Gebrauchsanleitung in chinesisch / englisch und ein Servicezettelchen bei.Das Stativ macht einen hochwertigen Eindruck, die Verarbeitung ist wie bei SmallRig üblich sehr gut. Die massive Tischklemme mit großem Knebel fasst 60mm starke Platten, die Spannbacken sind gummiert. Alles ist schwarz mattiert, macht also in Aufnahmen keine Reflexe.Nach problemloser Montage am Schreibtisch steht das Ganze sehr stabil, aber natürlich nicht völlig vibrationsfrei. Es empfiehlt sich, die Kamera fernzubedienen oder nach der Bedienung ein paar Sekunden abzuwarten.Das Ausleger-Gelenk hat (relativ grobe) Rasten, kann also auch schräg nach oben oder unten festgestellt werden. Der Ausleger misst mit Kugelkopf ca. 30 cm.Der Kugelkopf selbst ist zierlich, aber gut feststellbar. Wie bei allen Kugelköpfen muss man die Kameraposition mit der Hand vorsichtig einstellen.Ich habe das Stativ mit meiner Lumix S9 und Standardzoom 18-40mm getestet. Das Gewicht am Kugelkopf beträgt damit 956 Gramm, das Ganze ist sehr stabil.Das schwächste Glied scheint mir der kleine Kugelkopf zu sein, dem Stativ selbst würde ich auch wesentlich schwerere Kameras anvertrauen.Positiv anzumerken ist noch, dass sowohl das Standrohr als auch der Ausleger an den offenen Enden übliche ⅜“-Gewinde haben.Insgesamt macht das Ganze einen runden Eindruck - das Stativ ist sehr stabil und hochwertig verarbeitet, der Kugelkopf ausreichend für nicht allzu schwere Kameras. Der Preis stimmt auch.Gewünscht hätte ich mir lediglich noch einen kleinen Beutel mit zwei Fächern (Unterteil / Oberteil) zum Transport und für die Aufbewahrung.
Sci-Fi Freak!
Reviewed in the United States on March 6, 2025
The Smallrig desk mount camera arm is a very good device for mounting a camera or any other equipment that you want over a particular spot. I have been using my Smallrig deskmount camera holder to hold my somewhat heavy R5C with a 2.0 28-70mm lens and the mount is able to hold everything securely. In a pinch I even used it to suspend a heat lamp over my son's turtle cage. The mount seems to be of good quality and works well.
Mike M
Reviewed in the United States on March 3, 2025
I already had a less expensive camera desk mount that was okay but, when I saw this one by Smallrig, I couldn’t wait to order this. I have several Smallrig items and they are all very well made and this desk mount is everything I hoped for. It is well manufactured, very solid and stable. I’ll be selling the other one I got!
garry welch
Reviewed in Canada on March 25, 2025
Exatly what I wanted, I use it for a Canon Vixia camcorder and its perfect. Exellent quality for the price. Will buy another one soon.
Channing Lin DRIZ
Reviewed in the United States on March 1, 2025
Way better than elgato master mount!!! Highly recommend this! Ball head can easily handle Sony a7iv and a big lens unlike elgato.
bryce aguiar
Reviewed in the United States on February 6, 2025
Extremely stable and doesn’t take up any space on your desk. No more trying to balance my tripod on my desk and trying to record at weird angles. This thing lets you get ANY angle through the use of the included ball joint. Got my lumix g85 mounted on my desk and it’s made my workflow much easier for YouTube and Twitch.
Gery Fernagut
Reviewed in France on February 14, 2025
Parfaitrobuste stable et fonctionnel
Tolipa
Reviewed in the United States on January 6, 2025
I pretty much like anything SmallRig does. They have carved out a niche in the photo world by producing quality accessories for cameras, and without fail these have been excellent products for me.This camera/light mount is another example of SmallRig excellence. It is not an expensive rig, at $50 today, and it does what it is supposed to do. I can easily see mounting your phone, or camera for Vlog work, or lighting or both. The arm is fully adjustable up and down the main stand, and has a 360 degree turn ability. If you want to attach something to a table and record, or perhaps to copy something, this is an excellent way to do so.My concern comes from my experience setting up this rig. It looked straightforward to me: Attach the extension, loosen the arm, attach the 2nd ball head...... hang on...... it's in the photo so it must be here somewhere....... but it is not. In four of the eight photos on the display page there is a photo of the rig with a ball head on top and on the side. There is a flash on top, and a camera on top, all attached to a 2nd ball head - but there is only one in the package - and no disclaimer. For those of us planning a setup, this is a disappointment. Sure enough when I looked at the description, it showed only one ball head, but I believe something that is represented in a photo should either be there, or attached with a disclaimer that it is not included. That keeps the disappointment levels down.For your information, the threaded hole on top of the rig is 3/8-16. I happen to have multiple small ball heads and adapters (some of which are SmallRig) and so I have access to the necessary equipment. Someone who is a novice, or who doesn't have additional equipment, will be disappointed and will need other pieces to make this rig work.All the above aside, this is once again a quality SmallRig product that will have multiple applications and should be part of your kit if you are Vlogging, or even for macro work. But be ready to invest in another ball head if you want to do what they are showing in their marketing photos. All the same, it is SmallRig, it is good, and I recommend it.
LeroyJames
Reviewed in the United States on January 6, 2025
This SMALLRIG Desk Support Kit Model #4938 for content creation is extremely well built.I've owned many Smallrig products throughout the years and they do not disappoint; it's clear they're a brand of content creators who truly design with content creators in mind.With so many similar variations of desk mount camera kits on the market...I've cycled through a few; I wasn't expecting much but this is the one, the last one I will buy. Well unless of course they design a better one lol.What sets this apart from the rest aside from the curved detail to the base of the main pole is the overall build quality and versatile features. Unlike others on the market with a similar aesthetic this one is solid metal....brass details. There's no ABS plastic; not even the knob of the deck clamp; which I have yet to see differently on any other brand and they didn't cheap in the ball head either from end to end this is the Smallrig quality I've grown to love!And the value! This kit is priced VERY well! The quality is above the rest and yet their price is still inline with the market. The joint on this kit is that of a magic arm; it will require two hands to adjust which will probably make some people groan but c'mon get real that's not much to complain about. Both the elbow joint and desk clamp screw function smoothly and surprisingly there doesn't to be any concern, possibility of the secondary arm scratching the main arm during adjustments which promotes longevity while speaking to durability. This kit is super compact and lightweight making it perfect for content creators on the move. You could easily bring this along on the bus or train to a convention or to a restaurant for food photography.The thing I LOVE most about this kit is the hidden feature Smallrig failed to advertise and that's the fact that in addition to the 1/4 thread screw at the top of the main pole theirs an addition 1/4 thread screw hole at the end of the secondary arm as well which opens up great flexibility opportunities. This hidden feature will allow the for 3 devices creating opportunity to put more distance between your lens and light source or between your main camera and secondary all on one "rig" eliminating the possible need for a detached tripod to mount your secondary camera. I attached a magic arm to the opposite end of the ball head on the secondary arm.Overall this kit is of great value in more ways than one. It's a must have! Buy two gift one!
Damy Z
Reviewed in Italy on January 12, 2025
Ogni volta che ho preso un prodotto SmallRig non ne sono mai rimasto deluso, neanche in questo caso. Un supporto niente male, una chicca per chi fa streaming o registrazioni video in generale. Questa asta è di ottima fattura, bella robusta e massiccia, ha un morsetto che lo tiene ben saldo sulla scrivania, tavolo o qualunque altro mobile sporgente. Si può regolare come angolazione, e si può montare sull'altra estremità ciò che si vuole, ad esempio il suo aggancio classico e universale da fotografia (1/4''), al quale si può montare macchinette compatte, reflex e un'infinità di altri supporti (per telefoni, tablet, faretti, ecc). Ispira fiducia per la sua struttura e robustezza, quindi mi ritengo del tutto soddisfatto.Insomma, SmallRig ha tirato fuori un prodotto eccezionale che vale la pena ordinare!
Kaneda Shima
Reviewed in France on December 28, 2024
Ce support de table peut servir à de nombreux usages; en ce qui me concerne, je compte l'utiliser comme banc de reproduction. Quand on veut photographier un document trop grand ou un objet qui ne passe pas sur un scanner, le plus simple c'est l'appareil photo et un support comme celui-ci!Je l'ai essayé avec un téléphone et mon Olympus E-M1 (qui n'est pas très lourd), le support est bien rigide, une fois réglé il ne bouge pas.Evidemment, le réglage de la hauteur et de l'horizontalité de l'appareil photo est bien plus difficile qu'avec un vrai banc de reproduction, mais ce support est beaucoup moins cher et ne prend pas de place une fois rangé!!D'ailleurs, le bras vertical est en 2 parties, et glisser la bride du bras horizontal à la jonction des 2 tubes verticaux est malaisé, il faut complètement desserer la bride pour que ça passe.Au bilan, un outil très polyvalent, bien conçu et bien construit.
Recommended Products