Your cart is empty.
Your cart is empty.Product Description
GOINGMAKE Miter Gauge with Micro Adjust Flip Stop and Extendable Fence
GOINGMAKE table saw miter gauge for table saw is a must have table saw accessories. Ensure accurate angle set up, accurate and stable micro adjustable flip stop and easily zero calibration. Support up to 36 inch crosscutting with our telescoping fence.
Quick Zero Calibration Feature Ensure Accurate Cutting
GOINGMAKE miter gauge provides fast zero calibration with zero adjust knob for quick zero setup. 1, Move fence close to table saw blade, make sure there is a 1 to 3mm gap between blade and fence. 2, slide the flip stop to touch the blade. Last rotate the zero calibration knob to align the 0 scale.
Easy to Adjust the Accurate Micro Adjustable Flip Stop with Stable Stop
GOINGMAKE table saw miter gauge ensure precision cross cutting and miter cut with our mirco adjust fence stop. The micro adjustable flip stop is easy to use and the accuracy is up to 0.001 inch. Versatile flip stop is solid and stable without shaking ensure accurate cut. Includes mm and inch scales.
11 Precision Quick Positive Angle Stops with Smart Lock
GOINGMAKE table saw miter gauge protractor provides 11 accurate positive angle stop for quick angle set up for 90°,60°,45°,30°,22.5°,15°,0°,-60°,-45°,-30°,-22.5°,-15°. Easy to adjust with our fast and stable angle stop lock. You can also cutting angle from -60°to 60° with the clear laser scales.
Precision Extendable Miter Gauge Fence Up to 36 Inch
GOINGMAKE miter gauge can support up to 36 inch crosscutting with our extendable miter gauge fence. Solid construction and stable extension system for precision adjustment. Fits for 0-36 Inch crosscutting and -60 to 60 miter angle cut. The standard fence size is 19.5 inch and can extend to 36 inch.
Versatile Flip Stop Support You Do Anything
GOINMAKE miter gauge versatile flip stop is stable without shaking and you can also add extra accessories and also can add a sacrificial fence by yourself.(Not Includes sacrificial fence.) Includes a hidden fence stop. Also support square face or angle face workpiece with locating pin.
Zero Fit Miter Bar for 3/8 x 3/4 Inch Slot
GOINGMAKE miter bar includes adjuster both at the front, at the end and at the middle. Ensure smooth and fit sliding on the slot. Easy to adjust the ring to make perfect fitness between table saw and miter gauge sliding bar. Fits for 3/8 x 3/4 inch T slot and U slot table saw band saw router table.
Shelly D.
Reviewed in the United States on May 7, 2025
I give up writing about this tool line. Each and every tool from them should be in the workshop. (They’re in mine). By son-in-law is an engineer, and he studies how it’s made and comments on the quality. Yeah, I’ve spent a lot of money on these tools, but I believe they will last a long time….can’t go wrong.
Nanila
Reviewed in the United States on May 10, 2025
Came quickly. Took a chance on a Chinese tool, quality and severe accuracy. I’d go with this in a minute.
jskayak
Reviewed in the United States on April 8, 2025
I was pleased with the quality and accuracy of this miter gauge. I purchased this miter gauge because I am refacing my kitchen cabinets and need exact cuts. The only set up that i needed to do was to zero in the mm/inchs tape of the fence to the blade. The fence was at a perfect 90 to the blade. I did several trial cuts to ensure that everything was dialed in before cutting my walnut facing boards. I really like the micro adjustment on the stop. You just have to remember to reset it to 0 after you make your cuts. Great value for the money.
VG1500
Reviewed in the United States on April 22, 2025
I ama fan of Goingmake. They have outdone themselves on this one. Great miter guage. Has all the features you could possibly want. Highly recommended!!!!
ronnie saylor
Reviewed in the United States on April 15, 2025
Don’t go cheap buy this
Bob R.
Reviewed in the United States on April 11, 2025
I own an older Craftsman 10" table saw and while its in very nice condition for its age the fence and miter gauge were its weakest points. I had already replaced the fence system with a very nice unit so all that was needed was a new miter gauge. I had seen a video of the Goingmake miter gauge and was impressed with the design and quality of its materials so I decided to order one. It arrived packed in a double fitted box with every part packed in firm foam for protection. The assembly was very easy with all questions answered by reading the easy to understand supplied owners manual complete with photos. what impressed me was the quality of the finish and thoughtfulness of the design, at over 11 pounds the miter gauge takes control of any cut where the miter gauge is used. The fit in the slot on your table saw is easily adjusted using the supplied Allen wrench and once completed moves easily. Several cuts were made to check for accuracy and each were spot on. My old miter gauge was somewhat flexible which allowed for less that perfect cuts, not so with the Goingmake miter gauge, even when the gauge is extended to its full 36" length it still maintains its accuracy.In ending I recommend the Goingmake Miter Gauge, it functions as designed and while there are more and less expensive miter gauges on the market I find this gauge an exceptional value for the money.
Colorado Mike
Reviewed in the United States on April 11, 2025
This is a nice miter gauge!I have a cabinet shop I built 26 yrs ago and have done some pretty extensive work in it over the years.Custom cabinetry and furniture as well as all the basic work.I have a 5HP cabinet saw that is 50" blade right and I use an Incra mitre gauge on this.I LOVE the incra and am using it as a comparison for this review.This mitre has many useable features like length and angle of course, that is what these are for!My experience is similar to a couple other reviewers comments on this product so I'lll just highlight the issues I have that make this a 4x star vs 5x productThe washer set up for the mitre slot has some play - you can tighten and expand it to fit your saw but there is some play in it and I cant get it to be as precise as I prefer..Another review mentions that the bar sits below the table and as a result when coming onto the table the miter section hits the table and has to lift a bit to slide - this happened for myself as well and I REALLY wish the height of bar to top of table was adjustable.The angles are a bit off, not by much but its thereAdjustments and set up are pretty straight forwardAgain this IS a nice mitre and I do like it, it just is not as accurate as the one I already use daily...SO... Guess what? I am setting this up for my field saw!On my older large DeWalt on wheels I use on job sites this small amount of play and issues I mentioned above are still WAY better than the one that comes on ANY job site saw... so having this in the field makes my field work more accurate! Not as precise as my shop... but better than 95% of field use miters ..So that said... this is a winner for me and I am very happy to have this in my trailer and one my field saw, its a great improvement!If you're looking at this product, I am sure it will serve you well in any application, there may be better, but this is better than pretty much all factory miters that are shipped with job or fixed saws.Really a nice piece that I am enjoying using!
Recommended Products