Your cart is empty.
Your cart is empty.Will it fit for my projector ? 1. Please check your ceilling wall, is it concrete wall or regular wall ? The projector mount should only be installed on concrete or brick wall with provided screws. The Ceiling plate dimensions: 3.1 inches x 3.1 inches (square), make sure your wall could be installed. 2. The weight of your display should be less than 66lbs. 3. For projectors with 4, 5 or above mounting holes on the top. Please measure the maximal diagonal distance of any 2 holes of all mounting holes on the top of the projector; it should less than 14.2 inch, more than 9inch /230mm. 4. For projectors with 3 mounting holes on the top. Please measure the maximal distance of any 2 holes on the top of the projector; it should less than 14.2 inch, more than 9 in/230mm. Package Include: 1 x Projector Mount; Standard Hardware included
Adam Lusignan
Reviewed in the United States on August 2, 2024
Worked fine. Instructions are lacking but it's not rocket science and has been holding up my projector without issue
Customer
Reviewed in the United States on December 15, 2024
The product is ok but the instructions are sadly inadequate. I am sure some people might return this product for that reason. Thank God I was able to complete the assembly despite this being the case.
Steve O
Reviewed in the United States on November 24, 2024
For the price this beats anything I could have made for sure.That said, it is relatively inflexible for height, and I had to cut it down quite a bit and redrill screw holes to make it work for my use-case.That said it was cheap, and at least it looks good enough. The universal bracket worked fine with my projector, but don't rely on the instructions included with this to help you out a lot
Bobby Romero
Reviewed in the United States on August 11, 2023
Easy to put together and add projector. Must have for ceiling hanging. Good quality for the price.
Greg
Reviewed in the United States on March 13, 2023
I purchased this to use with a large Epson 3800 projector and I did a ceiling mount installation. It has been installed for a little over a year and so far no problems.I believe this mount will be suitable for any projector because of its weight capacity and the flexibility of the mounting holes.Pros:Has a durable finish,Weight capacity of up to 66 lbsHas an extension arm with height adjustments up to 5" (without arm) & 16.9" to 25.6" (with adjustable arm)Cons:some of the holes & threads might need to be cleaned up or they will easily strip.Overall I believe you will be happy with this mount & with only slight modifications it can fit about any projector
jacob
Reviewed in the United States on January 10, 2020
Missing hardware, minimal adjustment, have not installed already falling apart, 2 bolts came stripped out of the box, mounting plate slightly bent, sheet metal bolts are very very cheap do not use to hold any projector more then 5-6 pounds, instructions are generic and did not match my hardware I received, I received extra hardware that are not on the instructions and I have no clue where they go.I’d say easily stay away and do not buy this. I can’t even mount my own projector because of how much I’m missing.
Customer
Reviewed in the United States on October 19, 2017
Hardware works as advertised. It's a really good price and works great for me.It comes with bolts to mount it on a brick or concrete wall so I had to run to the local hardware store to get some drywall bolts and a couple of washers. That's it. Once I found a stud it mounted perfectly. All I need to do is run the wires up.It has nice adjustments whether mounted on the wall or ceiling and is well worth the money if you go get a few bolts.Cons: not much directions but you can easily figure it out.Works well.
Jenna
Reviewed in the United States on April 5, 2017
This projector mount is great! I just finished building a home theater in my basement, and needed a way to mount my projector to the ceiling near the center of the room. I have a fairly large (and heavy) Epson projector, and this mount worked perfectly (I only needed 3 of the attachment arms, but the 4th was easy to remove from the mount).The mount seems very sturdy, considering it was only $13. When I bought the projector from Best Buy, the salesperson tried to sell me one of their mounts, and the cheapest was $90! I am so glad that I did my research and found a much more inexpensive mount that does the exact same thing. It tilts, swivels, rotates, you name it. It is just as good a mount as any of the pricier brand names.
Recommended Products
