Shopping Cart

Your cart is empty.

Your cart is empty.

YONGNUO Upgraded YN560-TX II LCD Flash Trigger Remote Controller, for Canon and YN560IV/III YN660 with Wake-up Function for Canon Cameras

Free shipping on orders over $29.99

$45.00

$ 22 .99 $22.99

In Stock

1.Model:Yn560-tx Ii


  • Compared with YN560-TX, YN560TX II is Lighter, Smaller, Easier to LOCK on the flashes.
  • YN560 TX II C supports wireless trigger the YONGNUO YN560III, YN560IV, YN968C speedlite and all Canon DSLR Camera
  • Two Flash Modes: M/Multi. Remote control of Flash Output and Zoom per group, up to 6 groups. 16 Channels, Transmission Range: 100 Meters.
  • Compatible with Wireless Shutter Receiver of RF-602, RF603(II), RF605. Large and Clear Screen, User Friendly Interface.
  • Grouping show supports paging and scrolling mode; Customizable maximum grouping. Can work with any model of camera as long as it has standard hot shoe.



Product Description

1

YONGNUO YN560-TX II LCD Flash Trigger Remote Controller for Canon and YN560IV/III YN660 with Wake-up Function for Canon Cameras

YN560-TX II C, Manual Flash Controller, can trigger YN-560 IV YN660 YN560 III and remote control each group of flash mode (flash output) and the focal length settings by the controller, no need to operate on the flash, the flash display screen will synchronously display the parameters for the corrresponding grouping.

Specification:

  • Advanced model of YN560-TX [Lighter, Smaller, Easier to LOCK on the flashes(but not twist) than YN560-TX]
  • Can control up to 6 groups meaning that it can control up to 6 flash units.
  • Support Wireless Trigger For Yongnuo YN560IV / YN560III / YN660 / YN968C / YN860Li speedlite
  • Compatible with & Wireless Shutter Receiver of RF-602, RF-603, RF-603 II, RF605
  • CE/FCC/Telec certification
  • Can work with any model of camera as long as it has standard hot shoe.

Features:

  • 1, Wireless Triggering Function a, If you use it with like YN-560 IV/YN560III / YN660 / YN968C / YN860Li Speedlite, you need to activate the group function of them with YN560-TX II before you use them together, ( more detailed, you can see our manual. ) b, If you use it with other Yongnuo flash, you need a transceiver of Yongnuo RF-602, RF-603, RF603 III, RF-605.
  • 2, Wireless Shutter Receiver Function You can mount YN560-TX II into Camera, use shutter release cable ( LS-2.5mm Series ) to connect it with your camera, and set RF-602, RF-603, RF-603 II or RF605 in " transceiver " state, and then you can shutter release your camera and you can also mount one flash into the hot shoe of flash transceiver, it also can be triggered synchronously.

Features

Model: YN560-TX II/C
Product Type: FSK 2.4G Wireless Controller
Distance: 100M
Wireless Channel: 16
Flash Mode: M/Multi
Group Control: A/B/C/D/E/F
Zoom Range: 24- 105MM
Shutter Interface: 2.5 mm Shutter Interface
Battery Type: AA*2 (NOT included)
Stand-by Time: 120 hours
Dimensions: 65.5mm * 89mm * 42mm
Net Weight: 76g

Compatible with:

  • Yongnuo YN560IV / YN560III / YN660 / YN968/ YN860Li speedlite
  • Yongnuo RF-602 transmitter, RF-603, RF603 II RF605 Wireless Shutter Release. (Means that it can trigger the flashes if one of these flash receivers is connected to the flash, but it cannot control the power)
  • ALL Canon DSLR Camera

Package Including:

  • 1 * YN560-TX II C (Mini stand NOT included)
  • 1 * Manual in English and Chinese
  • 1 * Original box

DG M.
Reviewed in the United States on July 28, 2024
This controller is easy to work with and controls all my 560 flash compatible flashes
Trey McIntyre
Reviewed in the United States on May 15, 2024
Very functional and robust. Especially for the price. I had my old one for a very long time and only bought this because I lost it!
Mike Torino
Reviewed in the United States on December 13, 2024
Works so good. Love this thing!
Carla
Reviewed in Mexico on January 31, 2024
Muy fácil de manejar
Caveness
Reviewed in the United States on March 7, 2023
Pairs easily with my Yongnuo flashes and it has a better heft and quality feel than my Godox transmitter. They are not interchangeable with Godox flashes, however. I switch between Yongnuo for my main flash use and the Godox for high speed sync with my Canon system.
S R Ben
Reviewed in the United States on September 5, 2021
This is an excellent product. It does everything it says and more. Easy to set up and operate. It controls the flash(es) with ease and mounts the camera securely. This is a great buy. I would highly recommend this product.
Len P
Reviewed in Canada on January 6, 2021
I'm very satisfied. I use it with 3 Yongnuo YN560 IV speedlites and it worked like a charm.The only downside is that it's only in synch with my camera up to a shutter speed of 1/200 sec.
Mr. Jc
Reviewed in the United States on January 12, 2021
Sin duda alguna este es el accesorio que necesitas si tienes los modelos de flash YN560IV / YN560III / YN660 / YN968N II / YN860 Li speedlite. Pude configurarlo en menos de 10 minutos con tutoriales de youtube. Quien lo vende pues todo esta bien, el paquete llego sin ningun problema y la entrega fue en su dia justo y preciso.Viendo el punto de vista que el paquete llego a mi casillero y vino a mi Honduras 10 días despues todo fue un exito no tube ningun problema.Without a doubt, this is the accessory you need if you have the YN560IV / YN560III / YN660 / YN968N II / YN860 Li speedlite flash models. I was able to set it up in less than 10 minutes with youtube tutorials. Who sells it because everything is fine, the package arrived without any problem and the delivery was just and accurate on the day, seeing the point of view that the package arrived at my locker and came to my Honduras 10 days later everything was a success, no I had no problem.
Huckleberry
Reviewed in the United States on February 25, 2020
Being able to carry a 3 or 4 light setup in a shoulder bag is as good as it gets. I use the YN 50 III flashes daily and this little guy controls them all very easily from the camera - it really is among the MOST useful, indispensable pieces of gear I've ever had. Price wise, it's about 1/6 the cost of a PW and with the YN heads, much more flexible and reliable.Pairing is a PITA the first time, but once it's set up, the system works perfectly. Trigger battery level, each unit's settings and group assignment are always visible, the mount is SECURE unlike other units that get easily knocked off or loose. It's tiny, light, tough and supremely capable. 100s of thousands of images in, it's easy to get it at 95% right the first test shot, and then takes a couple of seconds to fine tune and get to work. A 4 light setup that will work in a myriad of ways that ALL runs under 3 bills and will fit easily in a shoulder bag (less stands) is a Godsend.Permanently spoiled on YN - all my OEM lighting stays home, and even for most studio sets, 2-3 560 IIIs and this little gem are all you need. Unless large specific mods are needed for a particular shot, even the big studio lights are unnecessary (90%+ of the time). Built like tanks, priced like popcorn, and day after day, set after set, they just work.I have raved about the YN stuff for years, and nobody who ever listened has EVER looked back. It's just that good and easy to use. Dropped, gotten wet, bumped, beat up and abused but they just keep going. You can pay a LOT more, but you won't get more.
mark anton
Reviewed in Australia on August 30, 2019
good, UI need improvements
Daniel Crisan
Reviewed in the United Kingdom on July 20, 2019
Very good performamce
Bastl
Reviewed in Germany on April 14, 2019
Die Verbindung mit einem meiner 560er Blitze war etwas fummelig, weil der Blitz extra eingestellt werden musste. Funktioniert jetzt und macht es er soll. Sehr gut die Steuerung einzelner Gruppen.Vielleicht etwa groß, aber vollkommen zufrieden.
Gordon S. Buck
Reviewed in the United States on November 23, 2017
I got this remote trigger as the Canon version but it is sometimes promoted as being universal and I was hoping it would also work with the Fuji XPro 2 camera . It does not work with the X Pro 2. It works fine with my Canon 7D.Along with the trigger, I also got the YN560 IV flash. The combination works fine and it is very convenient to change flash power with the trigger/controller. The trigger also works with my old YN565EX flash but it does not control the YN565EX.The controls on the trigger and those on the YN560 IV are almost, but not quite the same. In particular, access the channel change is different and this is a little confusing at first.All in all, a good value and combination. I'll probably be adding a couple more YN560 IV flashes.
Recommended Products

$40.00

$ 20 .99 $20.99

4.9
Select Option

$119.82

$ 50 .99 $50.99

4.9
Select Option

$40.00

$ 21 .99 $21.99

5.0
Select Option