Your cart is empty.
Your cart is empty.Product Description
The ZIBOO ZB-L100K Handheld LCR Test Clip
Is a powerful and versatile tool designed to enhance your testing and measurement experience. With its universal compatibility, digital bridge test capability, and Kelvin test line, this test clip is the perfect choice for professionals and enthusiasts in the fields of electronics, engineering, and telecommunications.
The ZB-L100K is specifically designed for testing and analyzing SMD patch components.
These miniature components have become increasingly popular in modern electronics due to their compact size and excellent performance. With the ZB-L100K, you can effortlessly assess the characteristics and quality of SMD patch components, allowing for efficient diagnostics and repairs.
The ZB-L100K features a digital bridge test capability, setting it apart from ordinary test clips.
. This advanced feature enables precise measurements of component parameters, including resistance, capacitance, and inductance. With the ZB-L100K, you can rely on accurate and consistent measurements every time, making it easier to analyze and troubleshoot components effectively.
The ZB-L100K is compatible with a wide range of models, making it a versatile tool for professionals in various fields.
Whether you are using UT622, UT611, AT824, AT825, AT826, TH2822A/C/D/E, VC4080, VC4082, U1731C, U1732C, U1733C, U1782B, ET430, ET432, ET433, or ET431, the ZB-L100K seamlessly integrates with these devices. This compatibility ensures quick and hassle-free connections, allowing you to focus on your measurements without any compatibility concerns.
Osman
Reviewed in the United States on March 8, 2025
Great pair of kelvin clips for my DE-5000 LCR meter. Early on I had made one but this is much better. Checked it against my make and the results for measuring small resistances are very close to each other. Also claims to be compatible with most LCR meters. Good value.
Vladan Jovanovic
Reviewed in the United States on March 28, 2025
Excellent value for money and really performs well!
Charles
Reviewed in the United States on February 26, 2025
Works perfectly and it is well made. If you have a handheld East Tester then buy this.
2L8 Smart
Reviewed in the United States on February 2, 2025
I'm giving this four stars ONLY because it doesn't have the exact size or retention features the Hantek 1832/33 meter wants. But it does fit the slots, and with some rubber retention cords, it will remain seated.This is the first time I ever used Kelvin clips. My primary use is in building RF circuits, where guessing component values will not work.To use these clips successfully on the Hantek (and probably other meters as well), it's first necessary to calibrate 'open' and 'shorted' clip conditions. I was very pleased with the stability of readings (for days) and being able to get sufficient accuracy even on low picoFarad capacitors and low microHenry inductors. The readings were hardly affected by re-positioning the clips.I might wish the leads were longer, but am aware there's a fundamental trade-off between length and stability.
Jesse D.
Reviewed in the United States on February 15, 2025
Works great, a little flimsy, but for the price it's decent. I wish the cable was a bit longer.
Karlz
Reviewed in the United States on January 3, 2025
Not too much to say about this other than it's well made and works with my LCR multi-meter. Connector not terribly long so you have to position the work piece somewhat close, but you'd want to do that anyway. The clips feel good in the hand and have sufficient spring force to hold securely. All-in-all I'm happy with these and don't have any problem recommending them to anyone looking for a decent set of Kelvin clips.
Treebeard
Reviewed in the United States on January 27, 2025
Well. It does not fit the de-5000 out of the box.If you force it to plug in you WILL bend the tab clasps and the unit will not work any longer.If you look at the edges of the connectors that came with the unit. The edges have been filed to a point. To insert between the connectors. You must file the edges similarly on the new units. They will work fine. Note. The direction it is plugged in matters. The cable should be to the left.
Consumer 23
Reviewed in the United States on April 14, 2025
Does not fit and can damage de-5000 without filing the blades. Misleading item description.
Alfred Altner
Reviewed in Germany on September 23, 2024
Habe zu meinen DE5000 auch den TL21 mit den äußerst kurzen Anschlüssen. In den Bewertungen wurden auf das Problem beim Anschluss an das DE5000 hingewiesen. Habe mir das angesehen und dann die Anschlüsse so wie beim TL21 angeschliffen und es funktioniert. Die Kalibrierung läuft ja über das DE5000, somit ist man bei der Messung etwas komfortabler unterwegs. Mit den ca. 30 cm Kabel und den starken Klemmen kann man auch direkt an der Platine messen.
A. E. Green
Reviewed in the United Kingdom on December 21, 2024
Bought for use with my newly acquired Hantek 1833C LCR meter - it fits and functions perfectly!
Recommended Products