Your cart is empty.
Your cart is empty.Product Description
This item is 10 Pairs for ZH1.5mm 2PIN Female and Male Connector Plug With Red Black Terminal Connector Wire Cable 150mm/5.9''.
It meet with ROHS environmental standards, uniform insulation thickness, high pressure, double upper plugging, reliable safety, no looseness, light and beautiful.
Features
These connectors are OK for low voltage/low current applications.It can be used to connect between a small micro controller board and small motors.
application
These connectors provide a quick and easy way to connect and disconnect components that need to be isolated from a circuit or that need to be replaced. You can using these in 3D printer, electric guitars and audio equipment to replace parts without de-soldering each individual connection.
Package Content
-10 x Female JST ZH1.5mm 2pin Wire Connector
-10 x Male JST ZH1.5mm 2pin Wire Connector
Specification:
- -Material: Tinned copper wire, plastic head at each end.
- -JST plug connector cable type: 24 AWG
- -Cable type: 2pin.
- -Pitch size: 1.5mm.
- -Length of wire: 150mm/5.9''
- -Color: Red and black.
CJ
Reviewed in the United States on January 20, 2025
These JST ZH1.5mm connectors provide reliable connections for small electronics projects. The 24AWG wire gauge is appropriate for the connector rating, and the crimping quality is consistent across all pairs. The 150mm wire length offers good flexibility for various project layouts while remaining manageable.The pin alignment and insertion force are spot-on - connectors mate securely with a positive click but don't require excessive force to separate. The polarity markers are clearly visible, helping prevent incorrect connections. Wire stripping is clean with no exposed strands that could cause shorts.Build quality exceeds expectations for the price point - the plastic housings are properly molded with no flash or rough edges that could interfere with insertion. The strain relief on both male and female connectors is adequately implemented, though adding a small dab of hot glue for high-movement applications is recommended.One consideration is that the wire insulation could be slightly thicker for better durability in tight-bend scenarios. The 10-pair quantity provides good value for prototyping or small production runs. For makers and electronics enthusiasts needing reliable micro-connectors for low-power applications, these offer a good balance of quality and affordability.
Takuro Spirit
Reviewed in the United States on September 6, 2024
I was hoping these were the right plugs to wire lights to the ESC, but they're not. I used them to extend the factory wires instead.
Carlos Gómez
Reviewed in Mexico on July 14, 2024
El producto cumple con lo ofrecido
John MacDuff
Reviewed in the United States on December 8, 2024
These were perfect for my application which needed these connectors on short leads.
Miss Understands
Reviewed in the United States on December 29, 2024
The kind of reliable parts that we needed. Size as perfect. We got thesm because we're developing a product at our house that we hope to manufacture. Not only would buy again, but we WILL buy again when we go into production. It's just at our kitchen table, but its fun. -- Luxine / Miss Understands
Zach
Reviewed in the United States on December 17, 2024
Couldn’t find a good pin kit for this type of cable and only needed one, but I guess it’s nice to have way too many spares lol. Works great, no issues, decent quality.
LGE
Reviewed in the United States on October 10, 2024
I used 3 of these to connect upgraded fans to my Neptune 4 Max 3D print head. These worked perfectly with my printer. I cut them to length and soldered them directly to the fans. I had to swap pins on 2 of the connectors to match the polarity of the print head. They pins came out and reinserted without issue.
Reviewer
Reviewed in the United States on April 24, 2023
I got these wee things to swap out some fans on my engineering deck 3D printer. They had to be tiny, tough, and simple to plug and unplug. I was chuffed by how well these things worked. They locked in tight and safe, and the cables were bendy and strong. The colors made it a doddle to tell which way they go and dodge any mess-ups. The cable length was just right for what I needed—not too long or too short.These things look like they are of the same sort and quality as the ones I already had on my 3D printer. When you're out on a space mission, there's nae time to go back to StarBase for replacement parts. They make my project look tidy and smart, which will impress my captain. I would tell anyone who needs a wee connector for their hobby or DIY projects to get these ones. They are top-notch and worth every penny. Just remember to tell the captain that ye need one hour to install them when ye only need ten minutes.
Woolly Mammoth
Reviewed in the United States on April 22, 2023
I wanted some micro connectors that I could use inside small devices. recently, I have been running into a lot of my older devices with batteries that are not holding a good charge anymore. I've been replacing the batteries, but to make things easier I am spot welding the batteries to connectors rather than to the circuit board. These micro connectors are fantastic for that. They are very small, and easily fit inside the devices without taking up much more space than the wires they replaced.The connectors come with very long pre-soldered leads, which would be useful if I was connecting to a circuit board. That is a very nice touch and I appreciate the pre-soldering, even though for my purposes stated above I am cutting the leads shorter.It’s 10 pairs of connectors in a thick zipper style bag. Exactly what I wanted.
Recommended Products