Your cart is empty.
Your cart is empty.Product Description
Specifications:
- Size: 65mm*36mm*18mm
- Output Capacity: DC 5V~30V,AC220V10A
- Quiescent Current: 20mA
- Working Current: 50mA
- Working Voltage: DC12V（fluctuate between 10V~16V won't be affected
- Operating Temperature: -40℃~85℃
- 1 x Timer Relay Module
Press K1 till display stops flashing, then press K2 to change decimal point in order to select time range.The third decimal point indicates 0 to 999 minutes, the second decimal point indicates 0 to 99.9 seconds. No decimal point indicates 0 to 999 seconds.
Long pressing K2 can turn on/off the display.
Instruction:
After power on, the timer will start to countdown. When time is up, relay will work.
Time Setting
K1 cycle includes 6 steps. Step 1,2,3 are setting "ON" time, step 4,5,6 are setting "OFF" time.
1, Press K1, the first digit flashes, press K2 to change the number;
2, Press K1, the second digit flashes, press K2 to change the number;
3, Press K1, the third digit flashes, press K2 to change the number;
4, Press K1, the first digit flashes, press K2 to change the number;
5, Press K1, the second digit flashes, press K2 to change the number;
6, Press K1, the third digit flashes, press K2 to change the number;
High Precision
The timer relay adopts MCU as the main chip, high timer precision and reliable performance. The cycle timer has a wide time range to meet your general using needs, both "on" time and "off" time are adjustable.
Repetitive Testing Circuit
Operating Equipment
Fish Tank Intermittent Pump
Sector 7G
Reviewed in the United States on March 1, 2025
Easy to setup. Excellent display. Inexpensive. Wish it had mounting standoffs.
Leonard Herring Jr
Reviewed in the United States on February 10, 2025
a little hard to set but works good.
Michael St.Amour
Reviewed in the United States on April 26, 2025
incomprehensible trash. spent 2 hours pushing buttons. got the relay to make noise but got no current out of either nc or no. garbage
Vern
Reviewed in the United States on November 29, 2024
Works great
J. W. Helton
Reviewed in the United States on September 15, 2022
EZ to use and program
Customer
Reviewed in the United States on March 29, 2022
Used to turn on a device 15 minutes and off same ol.
Ken K
Reviewed in the United States on November 7, 2022
Setting the timer was a bit tricky, for people having trouble getting the timer to count beyond 99.9 sec:K1 is divided into six cycles, the first three is to set ON time and the latter three is to set OFF time.Press K1 to select the 1st ON time value (i.e. X00)Press K2 to adjust the 1st ON time valuePress K1 to select the 2nd ON time value (i.e. 0X0)Press K2 to adjust the 2nd ON time valuePress K1 to select the 3rd ON time value (i.e. 00X)Press K2 to adjust the 3rd ON time valueKeep going to adjust the three OFF time valuesPress K1 to turn the timer ON and start countdown to OFFHere's where it gets tricky, to adjust the range for ON time (i.e. 0-99.9 secs, 0-999 secs, 0-999 mins):Press K2 to adjust the decimal for ON time while it's counting down to OFFThe third decimal point indicates 0 to 999 minutes, the second decimal point indicates 0 to 99.9 seconds. No decimal point indicates 0 to 999 seconds.Now you have to wait until the timer clicks OFF and starts to countdown to ON againPress K2 to adjust the decimal for OFF time while it's counting down to ONThe third decimal point indicates 0 to 999 minutes, the second decimal point indicates 0 to 99.9 seconds. No decimal point indicates 0 to 999 seconds.Now you're done!Finally, long press K2 to turn the LED display off/onThe timer has been working well, I have it set to run the compressor for a water cooler for 20 mins every 3 hours after the thermostat died and kept the compressor running until all the water froze up. Now with the timer, the water cooler works great again.
AO in Edmonton
Reviewed in Canada on September 3, 2020
It is not acceptable that a customer has to search through feedback from people who bought the same product and figured out how to use/wire it. Unbelievable that Amazon even stands for something like this.
george tavares
Reviewed in Canada on October 5, 2020
If you need a timer 16 min or lower this is perfect. There is no manual, but It programs easy.
Customer
Reviewed in Canada on October 21, 2020
Works great easy to hookup/wire easy to set the time I would recommend. I used for water pulsating decoys on a bulge pump worked great in damp and cold conditions
Harry J. Reid
Reviewed in the United States on October 24, 2017
Received with no instructions for either wiring or programming with the timer.Update #1The following programming instructions were provided by the seller in response to a request:When the power is plugged in, the countdown time is up and the relays work.K1 is divided into six times a cycle, the first three times is set to connect time, the latter three times is set the time of disconnection.Click on the K1 hundred digital tube start flashing, at this time press the K2, hundred numbers change;Click on the K1 10-bit digital tube start flashing, at this time press the K2, 10-digit number changes;Click on the K1 bit digital tube start flashing, at this time press the K2, the single-digit number changes;And so on, until the digital tube is not blinking;At this point, press K2, Decimal shift, the decimal point in a single representation of 0-999 minutes in 10-digit 0 to 99.9 seconds without a decimal point to indicate 0-999 seconds;After the choice, the time is set.Long press K2 to open or close the digital tube, reduce power consumption.Update #2So far, the connect time is adjustable to a max of 999 minutes, the disconnect time is maxed out at 99.9 seconds - email #2 to the supplier..Supplier has now confirmed that the disconnect time is maxed out at 99.9 seconds.Update #3Supplier has refunded the purchase price.If these cycle times meet your needs, this is a good little timer; unfortunately, it doesn't meet my needs.At least you now know what it is and how it's programmed.
Recommended Products
$79.70
$ 38 .99 $38.99
$29.87
$ 15 .99 $15.99