Your cart is empty.
Your cart is empty. SH-U11F is an upgraded version of SH-U11. Compared with SH-U11, SH-U11F adds isolation protection function, which effectively isolates power and communication signals. This design can ensure that the USB interface of your computer or notebook will not be damaged due to short circuit or operating errors, and is especially suitable for various industrial occasions.
Through this USB RS485/RS422 adapter, you can quickly access the RS485/RS422 network through a computer.
Great for point to multi-point communication with up 32 devices connected per converter!
Specification:
Model NO: SH-U11F
Standard : RS485/RS422
Main chip: FTDI FT232RL
Interface: USB Type B ,6 PIN Terminal Block
Cable Length: 1.0M/3.2FT
RS485 PIN: TXD+(A+), TXD-(B-)
RS422 PIN: RxD+, RxD-, TxD+, TxD-, GND
USB 2.0; compatible USB 1.1
Baud rate: 300bps to 3Mbps
APPLICATION
LED display communication data; machine PLC data read, write, and PTZ control; Centralized control of household electrical appliances; access control systems; variety of industrial automation; instrumentation; employee attendance machine; highway toll station; ATM machine.
List of supported systems
1,Windows XP,7,8,10
2,Ubuntu 11.10, kernel 3.0.0-19
3,Mac OS X 10.3 to 10.8 (32 &64 bit)
4,Mac OS X 10.9 and above(64 bit)
Packing list:
1 X SH-U11F USB to RS485/RS422 Adapter
1 X User manual
1 X USB Type B Cable(1M/3.2FT)
WARRANTY:
DSD TECH offers a 12-month warranty on this isolated USB to RS485 RS422 Converter. If you have any questions, please contact us and we will resolve your issue within 24 hours.
Important Notes
This product uses FTDI FT232RL chip by default, because of the chip out of stock, some production batches use FTDI FT232RNL model chip . Please do not worry, FT232RNL is also the chip produced by FTDI, can completely replace FT232RL. If you still care about these please contact us.
Jordi Martínez
Reviewed in Spain on September 24, 2024
Lo utilizo para conexiones con HMI (es el tercero que compro, para diferentes proyectos) y el funcionamiento es perfecto.
Patrick Jullien
Reviewed in France on January 21, 2024
Aussitot branché aussitôt disponible, y compris sous Linux debian, reconnu par les drivers standard et confirme au standard 422/485, très bon rapport design / facilité / prix, reste à voir la duree de vie...J'apprécie particulièrement les résistances de terminaison sélectionnables par jumper, que l'on ne retrouve que sur des cartes a plusieurs centaines d'euros... Bien joué !
A Customer
Reviewed in the United States on January 12, 2024
If you need RS232, RS485 and similar - especially if you want long term reliability/stability, protection from over-voltage, and flexibility, DSD Tech is the way to go. Can’t recommend them enoughAt this point I’ve purchased probably 2 or 3 dozen UART/TTL USB adapters from other brands/sellers in my lifetime. I used to think “they’re all the same- cheap, but they work” - but I realized over time that eventually ended up in the trash for one of several reasons- voltage not supported, baud rate not supported, or (most common) unexpectedly stopped functioningWith most of the other brands, you have to guess what voltage is supported- if you need anything other than 3.3v, it’s a dice roll. Ditto with baud rate. Need to support more than 1Mbps? Very few sellers even know the max rate of the chip, let alone disclose it to buyersThe DSD products all have clear and complete documentation so you know exactly what you’re getting- they’ll tell you “this model only supports X and Y voltage”, or “this model has a max of Z baudrate”, so you know which variant to getMost (or all) of the DSD products have isolated circuitry so they don’t fry your USB port (or themselves) when you inevitably connect to the wrong pinsYou get exactly what the listing says. And they seem to make just about everything. My favorite is the UART TTL adapter that has support via jumpers for 1.8v, 3.3v and 5v and some less common voltages in betweenI will never buy a no-name brand again- these may use generic chips underneath, but DTD is not a generic brandThe prices are very good- maybe a little more than sone competitors- but it’s worth paying a few extra dollars when you know it will do everything you need into the foreseeable future and won’t die either
Gavin R. Bishop
Reviewed in the United Kingdom on May 14, 2023
The advantage of this unit is that it uses a USB2 B port so if your computer has USB C ports you're not limited to the USB A cable supplied. For a MacBook Pro with USB C ports just dug out the USB C to 2B printer lead and adapter sprang into life enabling configuration and monitoring of the ModBus slaves.
Richard
Reviewed in the Netherlands on March 7, 2023
Perfect apparat om KNX installatie te debuggen met modbus interface
metapyx
Reviewed in the United States on February 22, 2023
This is my second unit with the same issue. I am using a MDO34 oscilloscope and can see my 485 buses drop from 4.4 V to 400 mV whenever I connect this 485 converter. I am using another brand and it works fine. Fortunately, my Rs485 chips can handle the issue and recover. Can't say the same for DSD TECH. I guess I will have to look elsewhere to find a USB converter.
Rich G
Reviewed in the United States on March 19, 2021
This devices works well and is easy to set up. Just be aware you can set it up for 4 wire 422 but not 4 wire 485.
James Stewart
Reviewed in Canada on August 17, 2020
This product does not work and I can't return it. Nice.
Nik
Reviewed in the United States on June 29, 2020
I have it connected to laptop running windows 10. Recognized and installed drivers. Was able to access and send and receive data. Seem to be well built. Leds show power and data (tx/rx).
DisseminateJoy
Reviewed in the United States on October 1, 2020
This is a perfect solution for building new controllers for older hardware. the 485 is a rare beast (in my experience) but this allowed me to easily build a controller to run from the Latest o/s on to the oldest hardware.Easy to work with, well made. was able to build and deploy the test configuration in under 20 minutes. The full working model took a couple of weeks, as I wanted it to do so much! but none of it was difficult.The good documentation from the manufacturer was most pleasing!
Recommended Products
