Your cart is empty.
Your cart is empty.Product Description
1-13/16 inch length.
From the Manufacturer
For over 100 years, Pfister has been a leader in the plumbing field, offering a wide variety of innovative, first to market plumbing fixtures and many additional products that have helped define the industry. As part of the Stanley Black and Decker Hardware and Home Improvement Group, a global company renowned for its leadership, Pfister is ready to launch into another centennial offering quality plumbing fixtures, superior designs and breakthrough innovations.
Robert Breitwieser
Reviewed in Canada on September 14, 2024
Good quality and easy to install.
btevert
Reviewed in Canada on August 9, 2024
Fits and works well. Easy to install.
D Cro
Reviewed in the United States on August 6, 2024
Easy to install, worked first try.
Timothy LoPresti
Reviewed in Canada on July 25, 2024
Perfect fit replacement part
i hwang
Reviewed in Canada on February 14, 2024
It was a hard-to-find piece and I am relieved to have found it. Great deal!
LOON
Reviewed in the United States on December 15, 2024
Works good, but I do replace these more often than I'd like!
Don
Reviewed in the United States on October 26, 2024
Installed like a breeze, No leaks no issues good purchase.
Grumpa
Reviewed in the United States on September 6, 2023
Sept 2023: The is is about the 9th one of these faucet cartridges I've put in. They *always* wind up leaking through the valve out into the sink. Hot and cold always leak. Sometimes in a week, sometimes in a couple months. Near as I can tell, they are all made in either Mexico or China. I have a whole bag of them. Sometimes, I get them to work for a while by swapping the ceramic(?) discs from one cartridge to another. This last time, after a brand new one started leaking in a few days, I got my O ring assortment out and added a thin O ring between the discs and the main valve seal washer. It is actually acting as a spacer to put more pressure on both the discs and the faucet-to-plumbing fixture base washer. So far (two weeks) it has worked! This time, it was the cold faucet but both H & C faucets fail regularly. We'll see if this additional washer thickness works long term. The faucets were installed about 20 years ago so I know they weren't abused. I adjust the house water pressure to about 65 lbs, so it is not too high. We'll see if my purchase of a huge assortment of O rings continues to pay off.
James C Young
Reviewed in the United States on March 5, 2021
This fits the Savanna model of the Price Phister faucets. I ordered this item in hopes that it would fit as I had a constant flow of water coming from our faucet and I did not want to call a plumber in and have them charge Us 200 dollars and possibly bring Covid 19 into our home. I just shut off the cold water valve under the sink. If you take photos of your faucet and send them to Price Pfister they will try to identify the model. I got lucky as this was the correct replacement cartridge for our 20yr old faucet. This happened while Texas was experiencing the coldest weather ever. I was not sure when Price Pfister was going to get back to me as it was a late Friday evening when I took a chance on buying this item. They sent me an email with the correct part number. So I got lucky on getting the correct item.The ceramic piece had worn out and there is a black washer that had become damaged and worn out as well. Make sure you get everything out of the hole before you screw this in to the faucet. It comes with a white collar on the new cartridge as well and I thought it was to seal the cartridge between the plate. It actually is suppose to go down inside the hole and I found out the hard way that the old one was still in the hole and it was leaking a lot worse. I took it apart again to discover that the old white collar was down inside the unit. I removed it and it has worked fine since then. I was extremely surprised that I could still find this part for a 20yr old faucet.
catsim
Reviewed in Canada on July 12, 2020
Not sure why warmth is a factor to rate these on. Had a plumber to the house on another issue and had him look at my leaky faucet while he was on a visit. He said he couldn't get cartridges for my "old" Price-Fister faucets so I would need to buy all new Moen faucets from him. Guess he thought I was a dumb old woman. I sent him packing and found these on Amazon. A video from manufacturer and was easy to install myself. The listing didn't mention that these were for hot side and that you need to reverse the notches for cold side. No more leaks!
Michael Morgan
Reviewed in the United States on October 1, 2020
OEM not like the ones you get at Home Depot or Lowes which work on the Hot Faucet side but require you to flip a disc to put on the Cold Faucet. They do NOT work and the faucet on the cold outlet will still leak. This one easy to install and works perfectly. Go with this one you won't regret it! While the Big Box stores you will have to return! ( I tried both stores valve and they did not work but this one did. Very satisfied!!
spacecitygirl
Reviewed in the United States on May 7, 2019
I am very satisfied with this part. My faucet (I believe it is the Price Pfister Savannah Kitchen Faucet) is probably 12+ years old and had started to drip. After some Googling and You-Tubing, I discovered this part. The Price Pfister website listed 5 places you could buy it, and Amazon was one of them. The part arrived in a baggie that indicated it was a true Price Pfister part. It only took me 5 minutes to turn off the water, unscrew the knob, use a wrench to remove the old cartridge and insert the new one. After screwing back on the knob and turning the water back on, it was fixed - no more dripping! I also had to turn the slotted washer over at the top of the cartridge to change the direction the knob turned, but that was pretty intuitive and easy to figure out when I compared it to my old cartridge. This was easy to do and saved a lot of money versus having a plumber do it, or replacing the whole faucet.
Chet Alfredo
Reviewed in the United States on April 20, 2014
After some research, I finally learned that this cartridge replaces either of the Pfister bathroom sink cartridges 910-681 and 910-691, for lever faucets. So this 910-9000 (sometimes seen as the 910-900) replaces either the hot or cold side, and you simply remove the clip, flip over the stop-out, and replace the clip to switch it from hot to cold (mine came set for hot rotation, which is what I needed).There is a video showing how, at the "pfisterfaucets" website at /How-To-Center/how-to-videos/910900.aspxThe valve works great so far - no more drip drip drip. The faucet handle now turns incredibly smoothly, with perhaps too little resistance!Edit: replacement part failed after 2.5 to 3 years, due to the internal vinyl washer wearing out. Probably difficult to find that 2 cent piece, so just replaced the entire part. The rest of the cartridge holds up great, otherwise. Bottom rubber washer was a little worn, but that can be replaced.BEWARE of non-genuine replacement parts. I purchased again from this page and was sent a non-genuine part. It was not smooth to operate, it was full of metal shavings, the external vinyl washer was not circular and did not fit properly, and the materials and internal design of the part is far inferior. The genuine part should come in a small bag with a genuine label.
Recommended Products
