Your cart is empty.
Your cart is empty.
NOTE: It can NOT be used counterclockwise!!
TrentB
Reviewed in Australia on May 26, 2025
Rubbish, drill chuck wasn't quality, ended up going to Sydney tools and buying one after trying to do up the chuck with they key and it kept slipping on the teeth
R.S. Lee
Reviewed in the United States on May 20, 2025
This is an impressive product for the price of $10. I noticed two things that I found lacking:1. the key slips in one of the three positions when tightening the chuck.2. the shank bent (seemingly easily) when I was using it yesterday, although I think this was mostly the fault of the extension I was using. However, I was able to bend it mostly straight with my hands, which makes me think the steel is relatively weak at the quick connect location.On the bright side, it appears that we can order new drill chuck adapters by searching for 3/8-24UNF.
David J.
Reviewed in the United States on February 7, 2025
Works ok not as expected.
Michael faulkner
Reviewed in the United States on April 8, 2025
Did Chuck didn’t fit in the impact driver you could put it in try and lock it and it will pull right out then it got locked holding it with my hand. It spun a part and fell into pieces.
Fraser
Reviewed in Australia on September 12, 2024
Works well for light duty jobs
Andrew
Reviewed in Australia on August 23, 2024
Great little gadget that really did a good job
Chris Stachowiak
Reviewed in Australia on September 14, 2023
Appears to be well made
Echo Charlie
Reviewed in the United States on July 11, 2023
It holds bits. It helps get the job done. When using lubricant for drills, the tool for tightening check can pop out of your hand. It needs a bigger tightening tool.
Robert
Reviewed in the United States on July 1, 2023
Works great but could need a better chuck key. Teeth are too soft and had to get another one.
David A
Reviewed in the United States on February 27, 2023
Chuck and spindle would not thread together. Threads do not match. I have requested a replacement and will review it once it arrives.Replacement drill chuck arrived and works well. All threads matched and assembled correctly.
John
Reviewed in the United States on December 28, 2022
The Chuck Key is very sloppy fit in the Chuck making hard to use. but does fit in Driver good, Instructions on what the screw was for missing
ghouston
Reviewed in Australia on December 15, 2022
It seems OK for the price. It does wobble with no load, but this may be inevitable with the hex chuck. Once drilling something, it's pinned at both ends and seems to work. I was able to fit a hole saw with a 3/8 inch (9.5mm shank), I didn't have a 10mm bit to try.To assemble it, you receive the chuck and a shaft with a screw in the end. Remove the screw (it's reverse-threaded, so turn it clockwise), open the chuck to the maximum, screw the shaft on to the chuck, and put the screw back into the shaft through the chuck mouth (it's reverse threaded, so turn it counter-clockwise).
Customer
Reviewed in the United States on November 3, 2017
I just bought an impact driver and thought this chuck would come in handy. The chuck opens and closes smoothly. I oiled it throughly inside and out and added it to my collection of add-ons for the impact driver. For the price, you cannot lose. I tried it out with a drill bit and drilled some holes in both wood and metal. The chuck held the drill securely throughout use. For the money, this appears to be a quality product.
Recommended Products
