Your cart is empty.
Your cart is empty.Replace worn or damaged plugs with this set of two GE-branded Quick-Wire Plugs. Use this easy-to-install replacement plug to fix or install a nonpolarized plug on your household appliance. Instructions are included for quick and easy assembly. Whether you’re a general contractor or a DIYer, this unit will make upgrading your bedroom, kitchen, office, workshop or other space a breeze. This nonpolarized replacement plug is the perfect solution to repairs or replacements around the home. For use with 2-wire flat lamp cord #18/2 AWG SPT-1 or round cord #16/2 AWG SVT or SJT (0.23in. – 0.45in.), this premium, UL listed replacement plug is designed for nonpolarized (2 same-size slots) household outlets and connectors. NOTE: Do not use with fabric-covered heater cord type HPD, flat heater cord type HPN, #16 flat cord type SPT-2, electric shaver cord type TPT or electric cords smaller than the diagram featured on the back of the packaging. Experience the convenience of GE-branded Quick-Wire Plugs.
Kaybee
Reviewed in the United States on May 7, 2025
Worst design i have experienced. No way GE sanctioned this product.It is needlessly hard to turn the screws. The nut turns in the soft plastic it is held by especially as you open it more to allow the wires in.Very little housing to pinch the insulation to make a good mechanical connection that won't pull on the conductors.Waste of money.
Pale rider
Reviewed in the United States on March 12, 2025
Works good easy to install still working right now
Thinkerball
Reviewed in the United States on February 19, 2025
The cord plug of my cherished old christmas star broke and this solved the problem. It was easy enough to change cords.
Nat
Reviewed in the United States on January 26, 2025
The plug was delivered as advertised. The pictures of the plug were accurate. The directions were found on the back of the packaging, but were rather small to read. I installed the plug in about 15 minutes with no issues. It was then tested and it worked. As seen in the pictures, one side of the plug fingers is wider than the other to differentiate between neutral and hot wires.
J
Reviewed in the United States on January 26, 2025
Worked perfectly to replace the polarized plug on a vacuum. I chose this one because:A) It was polarized, a lot of replacement plugs aren't.B) GE is a decent brand.C) It had screws to hold the plug together rather than plastic clips.It's now April 2025 and it still works, nothing has broken or changed on it.
Tony
Reviewed in Canada on January 15, 2025
Worked ok but kinda large
John
Reviewed in the United States on April 2, 2025
Worthless! One terminal is so tight I cannot loosen or tighten. Not enough room under terminal screw plate to insert #16 gauge stranded wire. Tossed in garbage. Save your money.FOLLOW UP!Did something I am totally against doing....I bought a second, identical plug out of curiosity. After. all, dirt cheap! Identical to the first but still doesn't look like the picture on Amazon's site. But, it IS polarized as the first one was! This one installs just fine. Quality control was lacking on the first plug. I now have a $16 plug on my device. I gave 3 stars because I put the first one in the trash.
Rosalba Politi
Reviewed in Canada on December 4, 2024
I had to fix the end of the cord on my vacuum-it worked perfect.
crewdoglm
Reviewed in the United States on December 21, 2024
I used a pair of these to make lamps - adding a lamp base & light to some ceramic Christmas trees. They seem well made for what they are which is, a crafting-level product NOT something you'd use on a tool or outdoors. Note: the Amazon description states "no wire stripping" needed. I didn't believe that when I read it and as expected, wire stripping is 100% needed; you attach the wires to a normal looking copper terminal with a screw - no insulation-defeating miracle occurs in there LOL.
Isela Espinosa
Reviewed in Mexico on November 20, 2024
oO recomiendo ampliamente, tiene un costo alto pero la seguridad y facil instalación lo hace muy efectivo y eficiente.
Lily
Reviewed in Canada on October 6, 2024
This plug replacement is very high quality. Used it to replace the defective plug on my Kenmore sewing machine power cord. It is working perfectly and easy to install.
Chris K.
Reviewed in the United States on April 23, 2024
I had thrown this plug in the trash, but then, I put on my very best reading glasses and tried again. The "stops" are difficult to see. They are plastic. You do not have to strip the wires, just lay the end against the stops. Next, you'll have to carefully push the wires, one at a time, down into the very narrow channel. Be persistent, It will not want to go, but keep turning and pushing the darn thing until it goes in. When you close the lid on the wires, it is NOT going to cooperate. Force it down anyway with all your might. The screw is going to look too short, but it's not. Just keep turning the screw squeezing as you go until the wires are finally encased in the plug. Bam, it actually worked. By sheer force of my indomitable willpower, my lamp is now working. Hmf.
Zeta
Reviewed in Mexico on September 27, 2021
Creo que cualquier persona podria usar este remplazo aunque no tenga conocimientos de electrica ya que es muy sencillo y trae un pequeño diagrama demostrativo.
Recommended Products
