Your cart is empty.
Your cart is empty.Product Description
Both rollers are inclined, fitted with one way bearings
Achieve safer, smoother and more precise cuts
This stock guides offer superior control on your workpiece by apply pressure towards the fence as well as downward to achieve safer, smoother and more precise cuts.The wheels sit close to the fence can control wood as narrow as 3/4 inch. It won't get in the way of push blocks and sticks.
Rubber rollers, durability and will not out of round or become sticky
The O-Rings are made of rubber, increases friction and has a nice cushioning effect. The rubber on the rollers will accommodate a very minor variation in thickness of the stock. Hex socket in knurled knob for extra leverage by using a hex wrench.
Support 3/4 x 3/8 inch, 30 type, 45 type T-Slot Track, 75 type france
You also can replace the slider by other with M6 thread to support your t track.
Sharon James
Reviewed in the United States on May 25, 2025
These roll one way to prevent kick back.
jeffry wainwright
Reviewed in the United States on February 4, 2025
I was hesitant to purchase this product because the reviews weren't high compared to other ToolCool products. After seeing the product in real life, there's truth to other reviews around this product fitting into rip fences. However, for the price, it's of pretty good quality. Additionally, some issues with fitting can be remedied with a T track knob kit for a few dollars, which in my estimation, still puts this product well under the cost of similar tools. If you prefer the one-way bearing roller feeder over plastic featherboards as I do, this is a viable option!
Graeme
Reviewed in Canada on February 22, 2025
This item is perfect for my table saw fence that has a built in t-track. The seller supplies different size fittings with the kit that work on my size of t-track. I have no issues with this item or the selling price that I paid.
Tony De La Cruz
Reviewed in the United States on April 27, 2025
Great protection for preventing kick backs
Louis Fisher
Reviewed in the United States on April 22, 2025
Nice product. Works well with my Grizzly table saw. secures directly to fence.
JR
Reviewed in the United States on August 21, 2024
The build quality is good in that I'm not afraid of a violent kickback breaking the guides. The guide angles are a bit deceiving though. Used alone, the front guide directs the workplace away from the fence. The rear guide pulls it back in, but why have this? Both guides should direct toward the fence. Yes, there are no springs to handle varying thickness lumber. Not an issue for most as you should have your lumber jointed and thicknessed before running through the table saw. One star lost due to the front guide being angled incorrectly.
Robert B.
Reviewed in the United States on May 31, 2024
Had high hopes for this to use on my table saw and shaper table. It is well made and has potential. Only problem it does not fit a 3/4" x 3/8" t-track from Amazon. It does fit the grove on the fence of my Rigid table saw, model 5212. However, the groove is too low so the guide doesn't go high enough to allow a 3/'4" board to pass under.I customized a nut and washer to fit the t-track and installed the t-track with clamps to the fence. It appears as it may work, and if it does I will add this information later.
Lyndon ellis
Reviewed in Canada on December 12, 2024
One of the two correctly directed the stock to the fence, the other is pointed away from the fence. 1/2 of the product is useless but the other half works fine....
Richard Schoonmaker
Reviewed in the United States on January 17, 2024
I bought this to fit into my combination 3/4" miter slot and T-slot bar mounted on top of my table saw fence. I liked the idea of this stock guide with angled rollers that help register against the fence with angled rollers, thinking safety as well as more accurate cuts. When I slid the miter sliders (red) into my miter slot and tightened the knobs, the mechanism angled away slightly from the fence. I measured the smaller arm and discovered that it measures about 0.7 inches, less than the o.75 inch width of the miter slot. I was going to return the stock guides but I am used to having to fix something on China sourced accessories as well as being stubborn to give up. I noticed that the tightening screws were threaded through using a standard 6mm x 40mm screw. I ordered some fender washers for 6mm ID screws x 1 inch OD x 1.5mm thick (funny mix of metric & US dimensions) and some 6mm x 45 mm screws. I used 2 flat washers , one on each side of the mechanism, slid the modified mechanism into the miter slot and tightened the knobs. Success. Everything is now straight and works as intended.I am giving this a 3 rating since this comes with hardware mounted to attach in a standard 3/4 inch miter slot and does not work properly due to the smaller arm being less than 3/4 inches in width which causes a problem when tightening the knob. I had to buy additional washers and screws to fix this.Note: This also comes with T-slot nuts which don't have this problem. The problem is if you want to use this with any standard 0.75 inch miter slot. In my case, I did have a T-slot track above my miter slot, but the rollers would not reach below about 0.8 inches from the saw table, which made it non-usable for my purposes. I also use the miter slot for mounting feather boards, so I was not about to flip the track upside down to allow use of the T-slots.
JohninBC
Reviewed in Canada on April 6, 2024
I mounted these in a shop-built auxilliary fence on my job-site table saw, using a T-track. I discarded the included mounting hardware, and used 1/4-20 bolts and wing nuts, which work well.I have never used the JessEm Clear-Cut guide, but the big difference between this and the JessEm (other than appx $350) seems to be that the latter is spring loaded, whereas this has to be manually tightened to the stock. It can be tricky to adjust the tightness properly, as it must be free enough for the stock to pass through, but tight enough to prevent kick-back.With my minor modifications, I think that it is a reasonable tool for the price.
Earl Teigrob
Reviewed in Canada on September 20, 2023
One wheel does not turn smoothly, but the other one works great.I will try another one and see if I can get two wheels that work.I love that is presses the wood against the fence for a very cleat cut.
Recommended Products
$11.99
$ 6 .99 $6.99